The stratigraphy at the Gamigab Sn prospect consists of two mainly schistose units separated by a thick marble unit which have been assigned to the Orusewa, the Karibib and the Kuiseb Formations respectively. Four phases of folding affected the lithologies with the south-south-west trending F2 folds defining the main structures in the region. The area underwent low grades of metamorphism. Temperatures were in the range 420° to 500°C and pressures less than 2 kbars. The effects of contact metamorphism are seen in the south-east and south-west. Regional metamorphism outlasted the deformation and contact metamorphism started late during deformation. Two Karoo-age intrusions penetrated the metasediments north of the mineralisation. One is an altered porphyry plug and the other is a weathered dolerite plug, the latter containing xenoliths of undeformed Karoo sediments. Cassiterite is hosted within east-west trending quartz veins that cross-cut previously altered schistose country rocks. The alteration types include sericitisation, tourmalinisation, carbonatisation and ferruginisation. Preliminary Rb/Sr dating on muscovite from the alteration zone suggests an age of 509 ± 11 Ma. Breccias of probable hydrothermal origin are spatially associated with the mineralisation. These hydraulic breccias occur in antiformal structures within the marble and developed in response to a sudden pressure release due to a build up of fluids at the contact between the schistose Orusewa and carbonate Karibib Formations.

The study area is situated in the Southern Central Zone of the intracontinental Pan-African Damara Orogen, approximately 20km NNE of Navachab Gold Mine in the Karibib district of Namibia. Mesothermal vein systems with Cu-Fe±Au mineralization are hosted by amphibolite facies calcitic and dolomitic marbles belonging to the Navachab Member of the Karibib Formation, and are best developed around the defunct Onguati Copper Mine, Brown Mountain and Western Workings areas. The Onguati study area is located in the saddle region of a moderately-to-gently inclined anticlinorium that experienced significant flattening during NNW-SSE-directed compression. The parallelogram arrangement of ENE- and NNE-trending thrusts and reverse faults that surround the Onguati study area may have developed when the direction of greatest principle subregional stress was oriented WSW-ESE. These structures define part of a Riedel shear system and later faults may have developed in the position of R and P shears respectively. Significant strain partitioning occurred between the ductile calcitic marbles which host the best developed, shear-related vein systems and the more competent dolomitic marbles. The thickness distributions of veins in the marbles of the Onguati Mine, Brown Mountain and Western Workings areas conform to a fractal or power-law distribution, The most intensely mineralized vein systems in the Onguati Mine and Western Workings calcitic marbles share similar low fractal dimensions (D-values) of 0.41 and 0.37 respectively. Veins In the calcitic and dolomitic marbles of the Brown Mountain area and in the dolomitic marbles of Western Workings have elevated D-values (>0.60) and are poorly mineralized. The low D-values «0.40) of the well mineralized vein systems reflect the higher degree of fracture connectivity. These vein systems were capable of efficiently draining and localizing large volumes of mineralizing fluids from crustal-scale structures. A metamorphic devolatization model is proposed where the entire Damaran metasedimentary and meta-volcanic package is seen as a large source area of very low concentrations of Cu, Au and other metals. Localization of deformation into crustal-scale faults and shear zones led to regional-scale hydrothermal fluid flow and focussing into the upstream fracture networks of the Onguati study area. Strong mineralization resulted when fluids encountered the reactive marble lithologies

A thesis submitted to the Faculty of Science (Geology), for the Degree of Doctor of Philosophy,University of the Witwatersrand, Johannesburg,1979 / This study is concerned with the geological history and porphyry- type copper molybdenum of the southeastern Richtersveld Province, in southern South West Africa. An area of approximately 300 km2 centred on the Haib copper prospect, was mapped at a scale of 1:10 000 and subsequently reduced. Observations of facies changes, textural changes, structural and other geological features were recorded and processed. Field work was followed by petrological and geochemical investigations. [Abbreviated Abstract. Open document to view full version] / WS2017

Thesis (MSc)--Stellenbosch University, 2015. / ENGLISH ABSTRACT: Geological remote sensing is a powerful tool for lithological discrimination, especially in arid regions with minimal vegetative cover to obscure rock exposures. Commercial multispectral imaging satellites provide a broad spectral range with which to target specific rock types. Landsat ETM+ (7), ASTER, and SPOT 5 multispectral images were acquired and digitally processed: band ratioing, principle components analysis, and maximum likelihood supervised classification. The sensors were evaluated on the ability to discriminate between sedimentary rocks in a structurally complex setting. The study focusses on the formations of the Naukluft Nappe Complex, Namibia. Previous work of the area had to be consulted in order to identify the main target rock types. Dolomite, limestone, quartzite, and shale were determined to make up the majority of rock types in the area. Landsat, ASTER, and SPOT 5 imagery were acquired and pre-processed. Each was subjected to transform techniques: band ratios and PCA. Band ratios were tailored to highlighted target rock types as well as a number of control ratios to ensure the integrity of important ratios. PCA components were inspected to find the most useful ones which were combined into FCCs. Transform results, expert knowledge, and a geological map were consulted to identify training and accuracy samples for the supervised classifications. All three classifications made use of the same set of training and accuracy samples to facilitate useful comparisons. Transform results were promising for Landsat and ASTER images, while SPOT 5 struggled. The limited spectral resolution of SPOT 5 limited its use for identifying target rock types, with the superior spatial resolution contributing very little. Landsat benefitted from good spectral resolution. This allowed for good performance with highlighting limestone and dolomite, while being less successful with shale. Quartzite was a real problem as the spectral resolution of Landsat could not cover this range as well. ASTER, having the highest spectral resolution, could distinguish between all four target rock types. Landsat and ASTER results suffered in areas where formations were relatively thin (smaller than sensor spatial resolution). The supervised classification results were similar to the transforms in that both Landsat and ASTER provided useful results, while SPOT 5 failed to yield definitive results. Accuracy assessment determined that ASTER performed the best at 98.72%. Landsat produced an accuracy of 93.29% while SPOT 5 was 80.17% accuracy. Landsat completely overestimated the amount of quartzite present, while all results classified significant proportions Quaternary sediments as shale. Limestone was well represented in even the poorest results, while dolomite usually struggled in areas where it was in close association with quartzite. Silica yields relatively strong responses in the TIR spectrum which could lead to misclassification of dolomite, which also has strong TIR signatures. / AFRIKAANSE OPSOMMING: Geologiese afstandswaarneming is 'n kragtige tegniek vir litologiese diskriminasie, veral in droë streke met minimale plantbedekking om dagsome te verduister. Kommersiële multispektrale satelliete beelde bied 'n breë spektrale reeks waarmee spesifieke gesteentetipes geteiken kan word. Landsat ETM + (7), ASTER, en SPOT 5 multispektrale beelde was bekom en digitaal verwerk: bandverhoudings, hoofkomponente-ontleding, en maksimum waarskynlikheid klassifikasie. Die sensors is geëvalueer op hul vermoë om te onderskei tussen sedimentêre gesteentes in 'n struktureel komplekse omgewing. Die studie fokus op die formasies van die Naukluft Dekblad Kompleks, Namibië. Vorige werk van die area was geraadpleeg om die hoofgesteentetipes te identifiseer. Dit was bepaal dat dolomiet, kalksteen, kwartsiet, en skalie die oorgrote meerderheid van kliptipes in area opgemaak het. Landsat, ASTER, en SPOT 5 beelde is verkry en voorverwerk. Elke beeld was onderwerp aan transformasietegnieke: bandverhoudings en hoofkomponente-ontleding. Bandverhoudings is aangepas om teiken rotstipes uit te lig asook 'n aantal kontrole bandverhoudings om die integriteit van belangrike verhoudings te verseker. Hoofkomponente-ontleding komponente is ondersoek om die mees bruikbares te vind en dié was gekombineer in valse kleur samestellings. Transformasie resultate, deskundige kennis, en 'n geologiese kaart was geraadpleeg om opleidings- en verwysingsmonsters was verkry vanaf die beelde vir die klassifikasies. Al drie klassifikasies gebruik gemaak van dieselfde stel van die opleiding- en akkuraatheidsmonsters om sodoende betekenisvolle vergelykings te verseker. Transformasie resultate is belowend vir Landsat en ASTER beelde, terwyl SPOT 5 minder bruikbaar was. Die noue spektrale resolusie van SPOT 5 beperk die gebruik daarvan vir die identifisering van teiken gesteentetipes terwyl die hoë ruimtelike resolusie baie min bydra. Landsat het voordeel getrek uit goeie spektrale resolusie. Dit goeie resultate opgelwer met die klem op kalksteen en dolomiet, terwyl skalie aansienlik swakker resultate opgelewer het. Kwartsiet was 'n werklike probleem omdat die spektrale resolusie van Landsat nie breed genoeg was om hierdie kliptipe te onderskei nie. ASTER, met die hoogste spektrale resolusie, kon onderskei tussen al vier teiken rotstipes. Landsat en ASTER resultate was baie negatief beïnvloed in gebiede waar formasies relatief dun was (kleiner as sensor ruimtelike resolusie). Die klassifikasie resultate was soortgelyk aan die transformasies in dat beide Landsat en ASTER nuttige resultate opgelewer het, terwyl SPOT 5 misluk het. Akkuraatheids assessering het bepaal dat ASTER die beste gevaar het met 98,72%. Landsat het 'n akkuraatheid van 93,29% opgelewer, terwyl SPOT 5 80,17% akkuraat was. Landsat het die hoeveelheid kwartsiet heeltemal oorskat, terwyl al die resultate groot hoeveelhede Kwaternêre sedimente as skalie geklassifiseer het. Kalksteen is goed verteenwoordig in tot die armste resultate, terwyl resultate gewoonlik afgeneem het waar dolomiet in noue verband met kwartsiet was. Dit is moontlik asgevolg van silika se relatiewe sterk reaksies in die termiese infra-rooi spektrum wat kan lei tot die foutiewe klassifisering met dolomiet (wat ook sterk reageer in die TIR spektrum).

The ENE trending Brandberg West - Goantagab Sn-W belt is located in the Southern Kaoko Zone of the northern coastal branch of the Damara Orogen. The lithologies in this area are turbiditic and consist of three schist units separated by two marble horizons, all of which are correlated with the Swakop Group. The formations are intensely folded by at least three episodes of which the first two are coaxial and resulted in prominent, approximately N-S trending, structures. Sn and Sn-W mineralization predominantly occurs as vein and replacement type mineralization. Vein type mineralization occurs as Brandberg West, Frans Prospect, Gamigab Prospect and the Goantagab Mining Area. The vein type mineralization is accompanied by intense alteration, consisting of greisenization, sericitization, hematitization and carbonatization. Replacement-type, hematite-cassiterite mineralization, occurs in the Goantagab Mining area in the marble close to, or at the schist marble contact. Intense ferruginous alteration of the marbles in this area, is associated with veins, which terminate against, or cross cut the marble. A regional metal zonation, ranging from Sn-W mineralization with minor sulphides at Brandberg West to Sn-sulphide mineralization at Goantagab can be detected. This metal zonation is attributed to the distance of the mineral locality from the source area, with Goantagab representing a distal and Brandberg West a proximal position relative to the source area. Structural, mineralogical and geological features of the mineralization in this area suggest that processes of ore genesis may be related to anorogenic magmatism of Karoo age.

M.Sc. (Geology) / Please refer to full text to view abstract

Thesis (MSc)--Stellenbosch University, 2013. / ENGLISH ABSTRACT: The close spatial and temporal relationship of shear-zones and magmas is commonly interpreted to indicate positive feedback between magma migration, granitic emplacement and shear-zone-associated deformation. Emplacement geometries and structural fabrics are however rarely preserved, hampering the study of shear-zones and granitic magmas interactions. This study focuses on an area around the Pofadder Shear Zone (PSZ) in Namibia and South Africa as a case study for granitic bodies, mainly as pegmatite sills and dykes, and their spatial and temporal relationships to a crustal-scale shear-zone. The PSZ is a NW-SE trending, dextral, Mesoproterozoic-Neoproterozoic transpressional shear-zone in Namaqualand, interpreted to have accommodated late-stage lateral escape of the Namaqua Metamorphic Complex in response to southward indentation of the Kaapvaal Craton around 1030 – 1080 Ma. In this study it is shown that the shear-core records an asymmetrical strain variation across the PSZ. This is indicated by pervasively banded ultramylonites, mylonites and the significant development of pervasive phyllonites at the southern margin, defining the internal ductile to brittle-ductile fabrics of the shear, during a progressive deformational evolution. Mapping of the PSZ fabrics and associated pegmatites documents how pegmatites are emplaced in structurally distinctive sites within, and adjacent to the PSZ. New U-Pb monazite ages derived from this study, show how pegmatite emplacement has occurred at different times of shear-zone development. The pegmatites are emplaced into earlier ductile to later brittle-retrograde fabrics that accompanied the ca. 45 Ma shear-zone exhumation. Pegmatites concentrated along the northern PSZ-margin are interpreted to be controlled by anisotropies developed axial planar to large km-scale and parasitic folds during the initial, predominately strike-slip stages of shearzone deformation that occurred as early as 1005 ± 5 Ma. Within the PSZ core, pegmatite emplacement is controlled by the syn-kinematic development of (a) subvertical, mylonitic and phyllonitic foliations and (b) fracture permeabilities created by synthetic Riedel shears and dextral dilatant jogs. The most significant pegmatite development around the PSZ is the Skimmelberg Pegmatite Stockwork (SPS) which forms an extensive interconnecting network of concurrent, foliation-parallel sills and thick (> 50 m) discordant dykes within the southern footwall of the PSZ. The dykes intrude as late as 958 ± 5 Ma into feather-shaped N-S extensional fractures (mode I) that developed due to episodic stick-slip at the boundary between the PSZ core and footwall rocks during periods of late-stage transpression. The SPS forms a steeply dipping fracture network that not only creates space needed for emplacement but effectively acts as a conduit for magma transport along the margin of the PSZ. The large extensional fractures of SPS create the necessary hydraulic gradients to tap the magma source of a regional trending pegmatite belt and form a sheeted complex adjacent to the PSZ. Therefore, this study documents how, during the progressive exhumation of a largescale transcurrent shear-zone, magma emplacement is not only concentrated within the highly permeable, high-strain domains (cores) of shear-zones but may be concentrated in diachronous, structurally controlled sites along the shear-zone margins. / AFRIKAANSE OPSOMMING: Die noue ruimte-tydsverband tussen skuifskeure en magmas word algemeen geïnterpreteer as ‘n aanduiding van positiewe terugkoppeling tussen magma migrasie, graniet-inplasing en skuifskeurgeassosieerde vervorming. Geometrie en struktuurmaaksels van inplasings word egter selde bewaar en belemmer die studie van interaksies tussen skuifskeure en graniet-magmas. Die studie fokus op ‘n area rondom die Pofadder Skuifskeur (PSS) in Namibië en Suid-Afrika as ‘n gevallestudie vir graniet-liggame, hoofsaaklik as pegmatiet plate en gange, asook voorafgenoemde se ruimte-tydsverband met ‘n grootskaalse skuifskeur. Die PSS is ‘n NW-SO-waarts strekkende, regs-laterale, Mesoproterosoïse-Neoproterosoïse transpressieskuifskeur in Namakwaland, wat geïnterpreteer word om die latere-stadium laterale ontsnapping van die Namakwa Metamorfiese Kompleks te akkomodeer in reaksie op die suidwaartse indrukking van die Kaapvaal Kraton omstreeks 1030-1080 Ma. In hierdie studie word getoon dat asimmetriese vervormingsvariasie deur die skuifskeurkern aangeteken word. Hierdie word aangetoon deur gebande ultramilioniete, milioniete en die noemenswaardige ontwikkeling van filoniete wat die suidelike rand deurtrek en definiëer die interne plastiese- tot bros-plastiese maaksels van die skuifskeur gedurende ‘n progressiewe vervormingsevolusie. Kartering van die PSS maaksels en geassosieerde pegmatiete dokumenteer hoe pegmatiete, aangrensend en binne die PSS, in eiesoortige strukturele terreine binnedring. Nuwe U-Pb monasiet ouderdomme, afgelei vanuit hierdie studie, toon aan hoe inplasing plaasgevind het gedurende verskillende tye van skuifskeurontwikkeling. Pegmatiete het vroeëre plastiesetot latere bros-retrogressiewe maaksels binnegedring wat die herontbloting van die ca. 45 Ma skuifskeur meegaan. Pegmatiete, gekonsentreerd langs die noordelike rand van die PSS, word geïnterpreteer as beheer deur anisotrope wat parallel aan die asvlak van groot km-skaalse en ondergeskikte plooie ontwikkel gedurende die aanvanklike, hoofsaaklik strekkingwaarste, stadiums van skuifskeurontwikkeling wat so vroeg as 1005 ±5 Ma plaasgevind het. Binne die kern van die PSS word die inplasing van pegmatiete beheer deur die sinkenimatiese ontwikkeling van (a) subvertikale, milionitiese- en filonitiese foliasies en (b) breukdeurdringbaarheid wat gevorm is deur sintetiese riedelskuifskeure en regslaterale uitsettende “jogs”. Die mees noemenswaardige pegmatiet ontwikkeling rondom die PSS is die Skimmelberg Pegmatiet Stokwerk (SPS) wat ‘n intensiewe netwerk vorm van intergekonnekteerde konkurrente plate, parallel aan die foliasie, en dik (>50m) diskordante gange binne die suidelike vloer van die PSS. Die gange dring in so laat as 958 ± 5 Ma binne-in veervormige N-S uitbreidende breuke (modus1) wat ontwikkel het as gevolg van die episodiese hak-en-glip op die grens tussen die PSS kern- en vloergesteentes gedurende periodes van laat-stadium transpressie. Die SPS vorm ‘n styl hellende breuk-netwerk wat nie net spasie maak vir indringing nie, maar dien ook effektief as ‘n geleidingsweg vir die vervoer van magma langs die rand van die PSS. Die groot uitbreidende breuke van die SPS skep die nodige hidroliese gradiënt om die magma bron van ‘n regionale pegmatiet gordel te tap en vorm ‘n bladvormige kompleks aangrensend tot die PSS. Gevolglik dokumenteer die studie hoe, gedurende die progressiewe ontbloting van ‘n grootskaalse torsieskuifskeur, magma inplasing nie net gekonsentreer is binne die hoogs deurdringbare, hoogsvervormde areas (kerne) van skuifskeure nie, maar ook hoe magma kan konsentreer in diachroniese, struktuur beheerde gebiede teen die rande van skuifskeure.