Preface: For anyone standing on the ridge of the Witwatersrand on a spring day in September 1886 the sight immediately to the south represented a hive of activity and hope. Nearly a hundred years later ample evidence stretches away on both sides of the watershed to confirm the fulfilment of those early sentiments. It is, nevertheless, all too easy to ignore the struggles and failures which marked the beginnings of the world's greatest gold field in the light of its subsequent abundant success. Only when attention is turned to the individual companies formed to exploit the discovery does the true picture emerge of the lack of adequate technological and managerial knowledge amongst the early pioneers and of the financial frailty of their companies. The object of this thesis is to shed light on these beginnings by reviewing the histories of four of the earliest companies established to work the main reef. The approach adopted is to scrutinize the material available with a view to determining the motivations and actions of the managements of the various companies with regard to their economic environment, whether within or without the individual company. Clearly, the availability of information is a major determinant of the success of any such venture and this was particularly so in the case of the companies considered. With the exception of the Barlow Rand Limited holding of the H. Eckstein and Company Archives, which offers an integral coverage of that firm's dealings with the emerging industry, and which is certainly the most comprehensive source of information available to the researcher, little material relating to specific gold mining companies has survived. Under these circumstances it was necessary to rely heavily for information on the local press. These newspapers proved an invaluable source in this regard. As a mining camp with a limited capacity for generating newsworthy incidents, the newspapers of early Johannesburg found an eager readership for information about the industry which lay at the heart of the community. For their part, the managements of the various mining companies found in the pages of the local press an outlet for intelligence both true and false; the press was a useful vehicle for the publication of directors' and annual reports to meet a wider audience, but similarly it could be and was used to disseminate 'spectacular' reports calculated to influence the status of a company's stock on the local share market. As a research source the press has thus to be approached with caution but its value, if the warning is heeded, is in no way diminished. Beyond these two sources the next most valuable accumulation of data on the early industry is "The Gold Fields Collection" housed in the Cory Library for Historical Research at Rhodes University. As a collection it is far from complete and it is to be hoped that the donors will in future see fit to augment it with further material as this becomes available. It neverthess proved an invaluable source for the investigation of at least one of the companies of the study and for a general background to the industry.

M.Sc. (Geology) / Please refer to full text to view abstract

M.Com. (Economics) / The objective of the thesis was to examine the relationship between the grade of ore, physical electricity consumption and working cost in the South African gold mining industry for the period 1965 - 1982. The South African economy is heavily dependent on the gold mining industry, which is a major earner of foreign exchange and a large consumer of labour and agricultural and industrial output. The industry is also important as a source of finance for both the private sector and the Treasury. Curtailment of activity within the industry by closing down the more marginal mines or by shortening the life of the industry' as a whole because of rising costs and/or a hesitant gold price, will harm the South African economy in a number of ways. The industry has no option but to regard the gold price as given. The remaining ore reserves tend to be of a lower grade and/or to be found at greater depth. Controlling the working costs would seem to be almost the only option open to the industry.

Three hybrid moment tensor inversion methods were developed for seismic sources originating from a small source region. These techniques attempt to compensate for various types of systematic error (or noise) that influence seismograms recorded in the underground environment in order to achieve an accurate and robust measure of the seismic moment tensor. The term 'hybrid' was used to distinguish between the relative method proposed by Dahm (1995) and the methods developed in this thesis. The hybrid methods were essentially weighting schemes designed to enhance the accuracy of the computed moment tensors by decreasing the influence of any low quality observations, to damp (or amplify) any signals that have been overestimated (or underestimated) due to local site effects, and to correct for raypath focussing or defocussing that results from inhomogeneities in the rockmass. The weighting or correction applied to a particular observation was derived from the residuals determined when observed data were compared with corresponding theoretical data (for a particular geophone site, sensor orientation and wave phase) and were calculated using a cluster of events rather than a single event. The first and second weighting schemes were indirectly related to the mean and the median of the residuals where the residuals were defined as the ratio of the theoretical to observed data. In the third scheme, the residuals were defined as the difference between the observed and theoretical data and the weights were based on the distance of a data point (measured in standard deviations) from the mean residual. In each of the weighting schemes, the correction was applied iteratively until the standard error of the least-squares solution (normalised to the scalar seismic moment) was a minimum. The schemes were non-linear because new weights were calculated for each iteration. A number of stability tests using synthetic data were carried out to quantify the source resolving capabilities of the hybrid methods under various extreme conditions. The synthetic events were pure double-couple sources having identical fault-plane orientations, and differing only in rake. This similarity in the mechanisms was chosen because the waveforms of tightly grouped events recorded underground often show high degrees of similarity. For each test, the results computed using the three hybrid methods were compared with one another and with those computed using the single event, absolute method and two relative methods (with and without a reference mechanism). In the noise-free situation, it was found that the relative method without reference mechanism showed the highest resolution of mechanisms, provided that the coverage of the focal sphere was not too sparse (> 3 stations). The hybrid method using a median correction was found to be the most robust of all the methods tested in the most extreme case of poor coverage (2 stations) of the focal sphere. When increasing levels of pseudo-random noise were applied to the data, the absolute moment tensor inversion method, the hybrid method using a median correction, and the hybrid method using a weighted mean correction all showed similar robustness and stability in extreme configurations concerning network coverage of the focal sphere and noise level. When increasing levels of systematic noise were added to the data, the hybrid methods using a median correction and weighted mean correction were found to exhibit similar robustness and stability in extreme configurations concerning network coverage of the focal sphere and systematic noise. In all situations investigated, these two hybrid methods outperformed the relative and absolute methods. The hybrid moment tensor inversion methods using a median and weighted mean correction were applied to a cluster of 14 events, having remarkably similar waveforms, recorded at Oryx Gold Mine. For comparative purposes, the absolute method was also applied. The inputs to the inversion methods consisted of the spectral plateaus of both P- and S-waves at frequencies below the comer frequency of the time-integrated displacement traces. The polarities of dominant motion were used as an additional constraint and were determined from cross-correlation of observed with synthetic P- or S-waves. The solutions computed using the hybrid moment tensor inversion using a median correction displayed a distinct improvement after the iterative residual correction procedure was applied. The radiation patterns and faultplane solutions showed a high degree of similarity, and are probably more accurate reflections of reality than those computed using the absolute moment tensor inversion methods. These observations are very encouraging and point towards the method's potential for use as a standard processing tool for mine seismicity. The implications of this work are a better understanding of the focal mechanisms of seismic events induced by mining activities, ultimately leading to improved safety underground.

The skills shortages in mining and mineral sector had existed for a decade and had a widespread effect on South Africa economy. It affects the level of economic productivity and reduces the country’s capacity to develop a knowledge society. This, in turn, affects the country’s functioning in the global economy. Despite the sector’s best efforts, the shortages continue to grow and threaten the delivery of projects and growth plans. Some researchers contend with the view that the persistence of skills shortages in mining and mineral sector is largely due to entrenched attitudes among both the industry and the community. They claim that employers have the means to change the educational profile of the subsectors by appointing recruits with higher levels of schooling. However, owing to the limited number of higher educated people living in the communities surrounding the mining operations and lack of interest in mining of people with higher levels of education, to name but few, employers are perceived to have a habit of employing people with little skills. The current study was aimed at investigating the impact of skills shortage on organisational performance, propensity to leave, competitive advantage and sustainability, from the management perceptive. The main objective of this study was to incorporate and embed previous research findings and theories into a comprehensive hypothetical model. A hypothetical model showed various factors that may influence skills shortage. Four independent variables (working environment, employment conditions, resources and education and training) were identified as variables that may influence skills shortage; and mediating variable (skills shortage) was also identified as a variable that have potential to affect dependent variables (organisational performance, propensity to leave, competitive advantage and sustainability) of gold mining sector. Furthermore, eight hypotheses were developed to test the relationship between independent, mediating and dependent variables. All these variables were clearly defined and operationalized with various items obtained from measuring instruments used in other similar studies. A purposive sample of 343 respondents was drawn from the population. A seven-point Likert scale and structured questionnaire were administered in person to the respondents and of which 300 were usable and subjected further to several statistical analyses. The validity and reliability of the measuring instrument was evaluated using significant effect p< = 0.001 and Pearson’s correlation test (α = 0.05). Data gathered were fed to and analysed by STATISTICA (version 10) and factor analysis and regression analyses were the statistical procedures used to test the significance of the relationships between the various independent and dependent variables. Consequently, working environment, resources and education and training were three independent variables that were identified as having ability to predict propensity to leave, competitive advantage and sustainability. An attempt was made to establish whether various demographic variables have an influence on mediating and dependent variables through the introduction of gender and position in the organisation while conducting an Analysis of Variance and Multiple linear regressions, but they obtained negative values. The conclusion is that demographic variables do not have over mediating and depended variables. The findings of this study states that with conducive working environment, availability of resources, the high levels of education and training, the country could produce skills that would reduce propensity to leave, drive competitive advantage and sustainability, innovation and entrepreneurship, create competitive advantages and boost employment sustainability.

Department of Mining and Environmental Geology / MESMEG

A THESIS SUBMITTED TO THE FACULTY OF ARTS, UNIVERSITY OF THE WITWATERSRAND, JOHANNESBURG, IN FULFILMENT OF THE REQUIREMENTS FOR THE DEGREE OF DOCTOR OF PHILOSOPHY. / In its chronic form silicosis had always been been taken for granted as one of the occupational hazards of mining. But both during and shortly after the Anglo-Boer War it manifested itself in a new accelerated form amongst former Witwatersrand rock drillers. Despite the appointment in the Transvaal of a commission of enquiry in 1902 and the promulgation of dust precaution measures, by 1912 the prevalence of and mortality from the disease amongst the Witwatersrand miners had not diminished. This finding suggests two of the purposes of the study: first, the reasons for the continued prevalence of the disease; and second, the extent of the mortality from silicosis amongst the miners. Because of the apparently low prevalence of and mortality from the disease amongst African mineworkers, the disease was ironically nick-named the "white death". Therefore another aim of the study is to examine the validity of the medical claim that the short contracts of African migrant workers safeguarded them from contracting accelerated si licosis. As the subject is complex, the study uses a thematic approach. Chapters two to nine deal with significant themes: first, the growing medical knowledge concerning silicosis, the mining and medical precautions against the disease and the age-old disregard for the occupational illness in its chronic form; second, the industrialists* need to reduce working costs, the development of mass-production technologies and the resort by management to "speeding up"; and third, the miners' needs for job and wage security, the encroachment of African competitors in semi-skilled and skilled spheres of mining and the introduction and the extension of the colour bar. Chapter nine deals with underground health conditions. Chapter ten explores the awareness of the new form of the disease, accelerated silicosis, and the establishment in 1902 of the first Transvaal commission on silicosis. Chapter eleven discusses the failure to implement remedies. Finally, chapter twelve explores the prevalence of and mortality from silicosis and the impact of the disease on the workforce of the mines. In chapters ten, eleven and twelve a synthesis is offered of the themes and findings of the previous chapters. The project is based almost entirely on contemporary primary and published sources. Apart from silicosis, a unifying theme throughout the discrete sections is the perceptions of miners of their vocation in general, and of this occupational disease in particular. The study requires periodization. As silicosis is a slow-developing disease the starting point of the investigation is 1886, when gold was discovered on the Rand. The study ends in 1910 because the establishment of Union in 1910 and the legal award of compensation in 1911 heralded a new era in the history of silicosis on the South African gold mines. The following are the conclusions. First, almost an entire generation of overseas miners, most of whom remained migrants and whose skills pioneered the South African gold mining industry, died from silicosis. Second, for reasons of self-interest, some of which they shared with one another, both the Transvaal state and the Randlords did virtually nothing to remedy the occurrence of the disease. Both parties were culpable for the neglect of the health of the industry's workforce: using only perfunctory dust safeguards, management intensified production through the deployment of both modern technology and labour intensive practices, peculiar to the Witwatersrand; and most of the state's interventionist initiatives were the result of pressure from the British House of Commons. Third, the fear and anger of miners at being the victims of a preventable occupational disease, provided the catalyst for their militancy during the period. Fourth, the industry's power was partly responsible for causing both the press and medical profession to be silent about the problem until 1910. Finally, the mineowners both seized and promoted the unsubstantiated medical orthodoxy, namely that the short contracts of African mineworkers protected them from accelerated silicosis, as an important rationale for perpetuating the migrant labour system / Andrew Chakane 2018

A Dissertation Submitted to the Faculty of Science University of the Witwatersrand, Johannesburg for the Degree of Master of Science. / Beatrix Mine is located 35 km south of the city of Welkom in the Welkom Goldfield and as such forms the most southerly of the Witwatersrand-type gold mines. The Beatrix Reef overlies an angular unconformity at the base of the Turffontein Subgroup, Central Rand Group Significant, southerly truncation of over 600m of the Johannesburg Subgroup, and the lower formations of the Turffontein Subgroup, occur at this unconformity in the Beatrix area.. characteristics of the Beatrix Reef conglomerates such as the morphology, sorting and packing of clasts, and the arrangement. of the sediments in various sedimentary structures and facies/ sequences, suggest deposition within a braided fluvial environment on a coarse-grained braid-delta. Sedimentation occurred after the fluvial degradation of previously deposited units, and culminated in a marine/ lacustrine transgression. Low aggradation rates led to significant reworking and concentration of placer materials in a depositional model probably typical of ventral Rand Group placer formation. Heavy minerals (and gold) are concentrated in response to hydraulic conditions and show a close association with large and small scale sedimentary features. Transport directions deduced from the sedimentary structures suggest a north to south dispersal of sediment down the braid plain. Sedimentary structures in the finer rained units at the base of the Eldorado Formation are indicative of tidal influences and document the marine transgression as the culmination of the degradational events. The lithologys sedimentary structures and facies sequences of the coarser grained units of the Eldorado Formation well as the overall coarsening upward of these lithologies indicate sedimentation in a braided , fluvial system, on an alluvial fan prograding across the preyiously deposited units" Sedimentary ~tructures and lithologic variations confirm a continued north to south dispersal pattern. In the area south of the Sand over the period of fluvial degradation and transgression after the formation of the Beatrix: Reef was followed by more rapidly aggreding fluvial progradation due to a major change in base level in response to compressional tectonics and uplift along the Western Margin Structure. Only in post-Central Rand Group times did relaxation and extensional tectonics result in the outpourings of the Ventersdorp .supergroup lavas and the cessation of active Witwatersrand Supergroup sedimentation. / Andrew Chakane 2018

A research report submitted to the Faculty of Science, University of the Witwatersrand, Johannesburg, in partial fulfilment of the requirements for the degree of Master of Science in Environmental Science Johannesburg, November 2012. / Acid rock drainage (ARD) and dust are potential consequences of gold and uranium mine residue deposits (MRDs) on the Witwatersrand basin. Urbanisation has taken place around mines and, with the curtailing of mining activities and clearing of land previously covered by MRDs, there is pressure to use this land for residential, industrial and agricultural purposes. However, mining companies historically were not required to provide pollution control measures and there is evidence for contamination of land and water. Thus, there is a need to prioritise contamination sources for mitigation and to understand the extent of contamination and potential risks associated with different categories of land-use on mining land. The aim of my study was to conduct a first-order risk assessment to aid in identifying vulnerable land use in the vicinity of gold and uranium mining, and prioritising MRDs, including footprints, for mitigation. To achieve this I constructed a Geographical Information System (GIS) using publicly available spatial data, and then tested the usefulness of historical aerial photographs and remote sensing imagery for mapping MRDs and impacts of MRD origin under Highveld conditions (i.e. a seasonal climate with summer rainfall and annual evapotranspiration of >2.5 times mean annual precipitation). The Ekurhuleni Metropolitan Municipality (EMM; 1923 km2) is an area of extensive historical mining with major urbanisation, while retaining areas for agricultural land use; thus it was selected as a representative study site. I used a numerical rating scheme, which combined a number of parameters in two separate stages to calculate a risk index. The first stage involved the classification of hazards associated with MRDs while the second involved an assessment of land use vulnerability based on exposure pathways and proximity. Historical aerial photographs (1938, 1964 and 2003) and the Chamber of Mines (CoM) Dump Indexes were used to identify and classify MRDs in terms of basic geotechnical properties, current status and historical failure. Multi-spectral data, acquired over two years (2002 and 2003) in two seasons (spring and summer) by the TERRA satellite’s Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) sensor, were used to compile thematic images, indicating potential contamination of surrounding land. It was intended that a zone of influence could be distinguished for each MRD enabling me to rate the hazard severity. The thematic images I selected included primary minerals (pyrophyllite and chlorite), secondary minerals (copiapite and jarosite), an indicator of uranium-bearing ore (referred to as mincrust) and the normalised difference vegetation index (NDVI). These minerals were chosen as potential indicators of different transport routes of contaminants and I tested their associations with different features and land use. I also tested for seasonal differences in the detection of these minerals, and used NDVI to examine the masking effect of active vegetation. I found GIS to be well suited for combining the various forms of spatial data and providing information about MRDs, aqueous pathways, proximity to vulnerable land uses and impacted areas. However, I found that the potential severity of the hazards posed by each MRD, as indicated by a zone of influence, could not be determined from aerial photographs and ASTER alone. I therefore utilised the findings expressed in the literature survey to assign ratings for the different classes of MRDs. The vulnerability assessment was also supplemented by literature review to rate land uses based on human exposure pathways. I determined that MRDs (including footprints) cover 4.1% of EMM, with slimes dams, totalling 3.5%, occupying the majority of this area. I found that 64% of slimes dams had failed prior to 2003 and I plotted a further 0.6% of EMM covered by visible mine residue spillage. Fifty three percent of MRDs were situated within 100 m of drainage lines or old wetlands, while 52% of these (i.e. 27% of the total) had been constructed in the watercourse. I also found that 15% were constructed on dolomites. Informal settlements were located on or bordering 6% of MRDs, with 41% of MRDs within 1 000 m. Eighty eight percent of MRDs were found within 1 000 m of formal residential areas, 71% within 500 m, and formal settlements were located on or bordering 5% of MRDs. Twenty three percent of MRDs were located within 500 m of agricultural land, while 35% were within 1 000 m; and industrial land use was on 9% of MRDs (footprints), with 40% of MRDs being within 500 m of industrial areas and 61% within 1 000 m I found that chlorite did not provide a ‘signature’ of gold and uranium mine residue, whereas the other four minerals did. I also found that, of the two seasons examined (spring and summer), the best time to take an ASTER image to detect mineral signatures of gold and uranium mine contamination is after a few dry days following the first spring rains. For this reason, I used the ASTER taken in late October (spring) 2003 to examine associations with pathways and land use. I found more pyrophyllite and copiapite on industrial and business land use than background, which I suggest is associated with the settling of windborne dust on large and flat roofs; although, in the case of copiapite this could be related to the oxidation of settled wind blown pyrite material. I found jarosite to be a reliable indicator of mine residue, which, together with mincrust, helped me identify contamination in former agricultural holdings, which are now a township. Although, chemically undefined, mincrust was a useful indicator of contamination, as I found it to be reliably detected on MRDs (including footprints), mine residue spillage, wetlands and other contaminated sites, and absent from known uncontaminated sites. Furthermore, it was not necessarily masked by active vegetation, whereas copiapite, jarosite and pyrophyllite were. Mincrust was also detected on irrigated agricultural land with an odds ratio of between 10 to 36 times greater than for rain-fed. Consequently, the most likely pathway for mincrust is the aqueous. The mincrust signature, together with historical aerial photographs, also assisted me to identify historical mining along Black Reef outcrops, through detection in a wetland upstream of known mining activities. The culmination of my study was a risk class and index for MRDs from which ‘risk maps’ were produced. These maps provide a guide to the level of risk posed by each MRD to the surrounding land use. Of the total 287 MRDs (including footprints) identified in the EMM, 50% were classified lower-risk; 40% medium-risk; 10% higher-risk and 0% as much higher risk. The lower-risk MRDs were predominantly rock dumps, whereas the higher-risk MRDs were slimes dams. The findings from my study will contribute to meaningful recommendations for future land use and enable mining companies, landowners, developers and government to allocate their resources judiciously (i.e. appropriate to the level of risk). The results of this study have been published as: Sutton, M.W., Weiersbye, I.M., Galpin, J.S and Heller, D., 2006. A GIS-based history of gold mine residue deposits and risk assessment of post-mining land uses on the Witwatersrand Basin, South Africa. In: A. B. Fourie and M. Tibbett (eds.), Mine Closure 2006: Proceedings of the 1st International Seminar on Mine Closure, Perth, ISBN: 0-9756756-6-4, pp. 667–678 (Appendix I). Sutton, M.W. and Weiersbye, I.M., 2007. South African legislation pertinent to gold mine closure and residual risk. In: A.B. Fourie, M. Tibbett and J. Wiertz (eds.), Mine Closure 2007: Proceedings of the 2nd International Seminar on Mine Closure, Santiago, ISBN: 978-0-9804185-0-7, pp. 89–102 (Appendix II). Sutton, M.W. and Weiersbye, I.M., 2008. Land use after mine closure – Risk assessment of gold and uranium mine residue deposits on the eastern Witwatersrand, South Africa. In: A.B. Fourie, M. Tibbett, I.M. Weiersbye and P.J. Dye (eds.), Mine Closure 2008: Proceedings of the 3rd International Seminar on Mine Closure, Johannesburg, ISBN: 978-0-9804185-6-9, pp. 363–374 (Appendix III).

Ultra deep mining presents many challenges to the mining engineer, one of which is the logistics to support mining operations quickly and efficiently. Typically, Witwatersrand gold mines operate at depths in excess of 2000 m with stoping taking place to 3500 m and investigations underway to mine to a depth of 5000 m. As mining progresses deeper and further from the shaft, the role of logistics becomes increasingly important if production targets are to be achieved. Access to the workings is often via sub vertical and even tertiary subvertical shaft systems with working faces as far as five kilometers from the shaft. It is inevitable therefore, that distance will negatively impact the working time available at the stope face, material transportation and distribution, as well as the removal of broken ore. Possible solutions to these logistical problems may be found in the use of different transportation systems or by applying sound design and operational principles to transportation systems, both in the horizontal and instope areas. This thesis investigates the challenges of logistics for ultra deep level gold mining in the Witwaterstrand basin for mining layouts planning to mine between 3000 m and 5000 m underground with typical horizontal distances of over 3000 m. The transportation needs analysis recognised that vertical transportation is a wellmanaged and organised system and is mainly the same for both shallow and deep level operations. As a result of this, the thesis only focuses on the logistical issues of the horizontal and in-stope processes. The literature review indicates that the majority of work previously conducted on transportation focused around the area of horizontal transportation with limited inputs to in-stope transportation systems. The review concludes that the traditional locomotive transportation system is the most applicable mode of horizontal transportation. Thus, special emphasis is given to trackbound transportation. An integrated approach is taken towards mine transportation advocating that underground logistics be considered as equally important as any other discipline, Le. rock engineering, ventilation, etc. In addition, the transportation process should consider each area equally important. All to often, the transportation of rock is considered of paramount importance over the transportation of personnel and material. Thus, the planning any transportation system should incorporate personnel, material and rock. To enable this, scheduling, communication and control are important with special attention required for transfer points in the transportation system. As each site has its own particular requirement, thus the final transportation systems must be drawn up based on the specific requirements of each mine. A guideline is proposed for the design of ultra deep level underground transport systems for personnel, material and rock transportation. Thus, providing mining engineers with sufficient information and data to select an appropriate transportation system to meet specific mine requirements. The thesis highlights areas requiring consideration by mine engineers when designing a transportation system from shaft to the working face. / Thesis (Ph.D.)-University of Natal, Durban, 2003.