An extensive research program was performed to investigate the load interaction effect of the combined action of small amplitude high R ratio cycles and large amplitude low R ratio underloads on the crack growth of large cracks. The study was driven by the needs of the damage tolerance approach in the helicopter structures, which requires robust knowledge on the crack growth behaviour of the advance high strength alloys under the characteristic helicopter spectra loading. The study was conducted on three metallic alloys, Ti-10V-2Fe-3Al, Al8090 T852 and Al7010 T76351 using compact tension specimens (w=70mm, t=17mm). The potential drop technique was used for the measurements of the crack length. The crack opening loads were determined from the applied load versus crack opening mouth displacement curve using a curve fitting technique and crack opening displacement gauge. The experimental results show that cracks can grow faster than the life predictions with no load interaction effects under spectra containing tensile underloads. The acceleration effects are different depending on the number of the small cycles, the Kmax, the R ratio of the small cycles, the underload cycle and the material. Significant closure observations on the underloads and on the small cycles of variable amplitude loading spectra were made. Based on the test finding and on the studies of other researchers, it is suggested that the acceleration effects are mainly due to the reduction of crack opening point of the tensile underloads comparing with the Constant Amplitude Loading (CAL) data. An extensive evaluation of the ability of FASTRAN model to predict the fatigue lives under the tested loading spectra was carried out. The evaluation focuses on the influence of the constraint factor a and the ∆Keff curve inputs on the predictions. The model produces very good and consistent predictions for the three alloys, when the inputs represent adequately the actual fatigue mechanism. The model predicts the measured acceleration effects by reducing the closure level of the underloads.

Submitted by Emanuel Varela Cardoso (emanuel.varela@ufcg.edu.br) on 2018-08-07T20:04:03Z No. of bitstreams: 1 TUILLY DE FÁTIMA MACEDO FURTADO GUERRA – DISSERTAÇÃO (PPGECA) 2016.pdf: 2570702 bytes, checksum: dc3123f0ac79b6573767e39e1c19c4c4 (MD5) / Made available in DSpace on 2018-08-07T20:04:03Z (GMT). No. of bitstreams: 1 TUILLY DE FÁTIMA MACEDO FURTADO GUERRA – DISSERTAÇÃO (PPGECA) 2016.pdf: 2570702 bytes, checksum: dc3123f0ac79b6573767e39e1c19c4c4 (MD5) Previous issue date: 2017-03-17 / Capes / O processo Anammox essencialmente é a desnitrificação autotrófica na qual nitrogênio amoniacal é oxidado por nitrito para nitrogênio molecular. O nitrito pode ser produzido em águas residuárias pela oxidação da amônia pelas Nitrosomonas. Todavia, tem-se que evitar que as bactérias do gênero Nitrobacter se desenvolvam para evitar a oxidação do nitrito para nitrato. O processo Anammox se aplica particularmente em águas ricas em amônia e pobres em material orgânico, como por exemplo, efluentes de digestores anaeróbios. Na prática tem sido aplicado com sucesso para efluentes de digestores de lodo aquecidos a 37 °C, mas a aplicação à temperatura ambiente na Europa (5 a 15 °C) não tem sido eficiente, pela dificuldade de eliminação da etapa de nitratação. Na presente pesquisa, procurou-se estabelecer se a nitrificação parcial é factível para a faixa de temperatura de esgotos no Brasil, para uma possível aplicação do processo Anammox visando à remoção de nitrogênio dos efluentes de reatores UASB. Para tanto, foram determinadas as constantes cinéticas da nitritação e nitratação em um sistema de lodo ativado entre a faixa de temperaturas de 12,7°C a 31 °C e as constantes de meia saturação do oxigênio dissolvido. A respirometria foi a ferramenta utilizada para determinar as taxas de nitritação e de nitratação e estimar as outras constantes cinéticas relevantes, sendo mostrado pelos resultados que esta é uma ferramenta útil na determinação das constantes cinéticas. Os valores encontrados das constantes cinéticas de crescimento das nitritadoras e nitratadoras em função da temperatura mostraram uma tendência de prevalecimento da nitritação sobre a nitratação em toda a faixa avaliada. Através da determinação da idade lodo mínima para a nitritação e nitratação pode-se estimar que operando um sistema de lodo ativado a temperatura ambiente adotando uma idade de lodo de 4 dias é possível promover a nitrificação parcial. / The Anammox process is essentially autotrophic denitrification in which ammoniacal nitrogen is oxidized by nitrite to molecular nitrogen. Nitrite can be produced in wastewater by the oxidation of ammonia by Nitrosomonas. However, it has to be avoided that bacteria of the genus Nitrobacter develop to avoid the oxidation of nitrite to nitrate. The Anammox process is applied particularly in ammonium rich waters and poor in organic material, such as effluent from anaerobic digesters. In practice it has been successfully applied to effluent from sludge digesters heated to 37 ° C, but application at room temperature in Europe (5 to 15 ° C) has not been efficient due to the difficulty of eliminating the nitration step. In the present research, it was tried to establish if the partial nitrification is feasible for the range of sewage temperature in Brazil, for a possible application of the Anammox process aiming at the removal of nitrogen from UASB reactor effluents. For this, the kinetic constants of nitriding and nitration were determined in an activated sludge system between the temperature range of 12.7 ° C to 31 ° C and the half-saturation constants of the dissolved oxygen. The respirometry was the tool used to determine nitration and nitration rates and to estimate the other relevant kinetic constants, and it is shown by the results that this is a useful tool in the determination of kinetic constants. The values of the kinetic constants of the nitriding and nitrating agents as a function of temperature showed a tendency of nitriding over nitration over the entire range. By determining the age minimum sludge for nitriding and nitration it can be estimated that operating a sludge activated system at room temperature adopting a sludge age of 4 days can promote partial nitrification.

This thesis focuses on shell shape plasticity of Unio crassus at 12 localities. 1129 shape outlines were used for the purposes of this work. The outlines were gained from 260 individuals in the way of analysing the winter growth lines. The Elliptic Fourier Analysis appeared to be reasonable tool for the bivalves' shells shapes assessment. The winter growth lines' consideration showed great potential for morphometric analyses. The results shows that PC1 and PC2 axes (from principal component analysis of shape coeficients) are growth- dependent. The allometry influence was removed by residual values assessment obtained from generalized linear model (GLM). The age, length and width parameters appears to be favourable combination for general allometry influence removal (by using these parameters as describing variables in GLM model). The results point to significant differences among localities in all assessed parameters. Furthermore, the significant difference in growth speed was approved. Speed growth indicator correlates with shape variables. The localities can be divided into two groups with different growth speed each (Bertalanffy growth constant, length in the third year and age relative length). These groups differs in about 10 mm in average lengths. The most similar localities were "Blanice...