The structure and payload of a CubeSat flight experiment that investigates the performance of particle dampers in a micro-gravity environment was designed, built, and tested, and will provide on orbit data for model validation and improved performance predictions for space applications of particle damping. A 3-D solid model of the integrated CubeSat structure and payload was created satisfying all constraints from CubeSat and the System Dynamics Department at Northrop Grumman Aerospace Systems. The model was verified using commercially available Finite Element Analysis software (FEA), and a prototype structure part was fabricated. The prototype was tested and verified the FEA. A complete subassembly ready for flight was manufactured as an engineering unit and tested to space qualification loads of both launch vibration and thermal vacuum. Two additional units were contracted out for manufactured to serve as the flight unit and backup, and are currently ready for launch.

A passive wireless surface acoustic wave sensor of a delay-line type is composed of an antenna, a transducer that converts the EM signal into a surface acoustic wave, and a set of acoustic reflectors that reflect the incoming signal back out through the antenna. A cavity forms between the transducer and the reflectors, trapping energy and causing multiple unwanted echoes. The work in this dissertation aims to reduce the unwanted echoes so that only the main transit signal is left--the signal of interest with sensor information. The contributions of this dissertation include reflective delay-line device response in the form of an infinite impulse response (IIR) filter. This may be used in the future to subtract out unwanted echoes via post-processing. However, this dissertation will use a physical approach to echo suppression by using a unidirectional transducer. Thus a unidirectional transducer is used and also optimized for 3rd harmonic operation. Both the directionality and the coupling of the 3rd harmonic optimized SPUDT are improved over a standard electrode width controlled (EWC) SPUDT. New type of reflectors for the reflective delay-line device are also presented. These use BPSK type coding, similar to that of the Walsh-Hadamard codes. Two types are presented, variable reflectivity and variable chip-lengths. The COM model is used to simulate devices and compare the predicted echo suppression level to that of fabricated devices. Finally, a device is mounted on a tunable antenna and the echo is suppressed on a wireless operating device.