This thesis investigates the relationship between elastic properties and rock properties of the Haynesville Shale using rock physics modeling, simultaneous seismic inversion, and grid searching. A workflow is developed in which a rock physics model is built and calibrated to well data in the Haynesville Shale and then applied to 3D seismic inversion data to predict porosity and mineralogy away from the borehole locations. The rock physics model describes the relationship between porosity, mineral composition, pore shape, and elastic stiffness using the anisotropic differential effective medium model. The calibrated rock physics model is used to generate a modeling space representing a range of mineral compositions and porosities with a calibrated mean pore shape. The model space is grid searched using objective functions to select a range of models that describe the inverted P-impedance, S-impedance, and density volumes. The selected models provide a range of possible rock properties (porosity and mineral composition) and an estimate of uncertainty. The mineral properties were mapped in three dimensions within the area of interest using this modeling technique and inversion workflow. This map of mineral content and porosity can be interpreted to predict the best areas for hydraulic fracturing. / text

The present study applies evolutionary and resource-based firm theories to three of the most prominent U.S. shale gas basins – the Barnett, Fayetteville, and Haynesville plays. Rather than broadly considering a host of factors that enabled what has often been labelled a shale gas revolution, an evolutionary approach recognizes the internal agents that have long been in place, but were triggered by technical and economic developments. As geologic understanding, along with innovation and competitive environments, evolves in each play so too does the entire shale gas industry. Building upon the Bureau of Economic Geology shale gas study funded by the Sloan Foundation, this study offers data-driven analyses to test theories of industrial evolution as applied to shale gas plays. Each of the three focus plays has undergone introductory and growth phases as well as a maturation phase in which there is an evident shakeout of operators. Industries are theorized to enter decline phases, yet none of the plays here have definitively declined. Certain economic signals, however, indicate that a decline is imminent, albeit variable in timing and pace. Conceptualizing the entire shale gas industry as an amalgamation of individual and evolving plays correctly describes how the industry is able to rejuvenate its growth trajectory through investment in emerging plays. Although heterogeneous geology, engineering capabilities, and economic environment, particularly natural gas prices, complicate the economics of shale gas extraction, an evolutionary approach proves to be a useful tool in describing the historical development of individual plays as well as the entire shale industry. Importantly, this application sheds light on the future development of valuable shale resources. / text

methane and other higher order hydrocarbons, through C4, with interest in further developing reactions important to methane- and ethane-related chemistry. With the increased demand for energy and the declining conventional hydrocarbons worldwide, energy companies, both majors and independents, are turning to unconventional resources to produce the hydrocarbons required to meet market demand. From coalbed methane to low permeability (tight) gas reservoirs and gas shales, energy companies are making substantial progress in developing the technologies required to bring these unconventional reserves to the market. A common misconception is that there are not enough domestic oil and gas reserves to fuel our economy. The United States imports most of the oil used for transportation fuel and several TCF of natural gas annually. However, there is a very large resource of natural gas in unconventional reservoirs, with over 2,200 TCF of gas in place in just the gas shale formations that have been identified in the energy arena (Navigant Study 2008). There are still major gas shale plays and basins that have not been explored and are waiting to be evaluated and developed. The natural gas in shales and other unconventional reservoirs can be used to generate electricity, or it can be turned into liquids and used by the transportation industry. It is also misconstrued that gas shales are relatively new in our industry and something of the future. The first commercially viable gas shale well was drilled in the early 1920s in Pennsylvania, before the famous oil well drilled by Colonel Drake. The objectives of this study are to (1) complete literature review to establish which geologic parameters affect completion techniques in five emerging gas shales: the Antrium, the Barnett, the Haynesville, the Marcellus, and the Woodford; (2) identify the different completion methods; (3) create an economic model for the completion techniques discussed; (4) develop a sensitivity analysis on various economic parameters to determine optimal completion strategy; and (5) create completion flowcharts. Based on the literature review I have done for several gas shale basins, I have identified seven pertinent geologic parameters that influence completion practices. These are depositional environment, total organic content (TOC), average gas content, shale mineralogy, shale thickness, and reservoir pressure. Next, I identified different completion and simulation trends in the industry for the different shale plays. The results from this study show that although there are some stark differences between depths (i.e. the Antrim Shale and the Haynesville Shale), shale plays are very similar in all other geologic properties. Interestingly, even with a large range for the different geological parameters, the completion methods did not drastically differ indicating that even if the properties do not fall within the range presented in this paper does not automatically rule them out for further evaluation in other plays. In addition to the evaluation of geologic properties, this study looked at drilling cost and the production profile for each play. Due to the volatility of the energy industry, economic sensitivity was completed on the price, capital, and operating cost to see what affect it would have on the play. From the analysis done, it is concluded that horizontal drilling in almost any economic environment is economic except for one scenario for the Woodford Shale. Therefore, gas shales plays should still be invested in even in lower price environments and companies should try to take advantage of the lower cost environments that occur during these times. With continual development of new drilling and completion techniques, these plays will become more competitive and can light the path for exploration of new shale plays worldwide.

Multistage hydraulic fracturing of horizontal wells continues to be a major technological tool in the oil and gas industry. Creation of multiple transverse fractures in shale gas has enabled production from very low permeability. The strategy entails the development of a Stimulated Reservoir Volume (SRV), defined as the volume of reservoir, which is effectively stimulated to increase the well performance. An ideal model for a shale gas SRV is a rectangle of length equal to horizontal well length and width equal to twice the half length of the created hydraulic fractures. This project focused on using the Multistage Transverse Fractured Horizontal Wells (MTFHW) for two novel applications. The first application considers using the SRV of a shale gas well, after the gas production rate drops below the economic limit, for low grade geothermal heat extraction. Cold water is pumped into the fracture network through one horizontal well drilled at the fracture tips. Heat is transferred to the water through the fracture surface. The hot water is then recovered through a second horizontal well drilled at the other end of the fracture network. The basis of this concept is to use the already created stimulated reservoir volume for heat transfer purposes. This technique was applied to the SRV of Haynesville Shale and the results were discussed in light of the economics of the project. For the second application, we considered the use of a similarly created SRV for producing hydrocarbon products from oil shale. Thermal decomposition of kerogen to oil and gas requires heating the oil shale to 700 degrees F. High quality saturated steam generated using a small scale nuclear plant was used for heating the formation to the necessary temperature. Analytical and numerical models are developed for modeling heat transfer in a single fracture unit of MTFHW. These models suggest that successful reuse of Haynesville Shale gas production wells for low grade geothermal heat extraction and the project appears feasible both technically and economically. The economics of the project is greatly aided by eliminating well drilling and completion costs. The models also demonstrate the success of using MTFHW array for heating oil shale using SMR technology.

Worldwide interest in gas production from shale formations has rapidly increased in recent years, mostly by the successful development of gas shales in North America. The Haynesville Shale is a productive gas shale resource play located in Texas and Louisiana. It produces primarily through enhanced exposure to the reservoir and improved permeability resulting from horizontal drilling and hydraulic fracturing. Accordingly, it is important to estimate the reservoir properties that influence the elastic and geomechanical properties from seismic data. This thesis estimates pore shapes, which affect the transport, elastic, and geomechancial properties, from wellbore seismic velocity in the Haynesville Shale. The approach for this work is to compare computed velocities from an appropriate rock physics model to measured velocities from well log data. In particular, the self-consistent approximation was used to calculate the model-based velocities. The Backus average was used to upscale the high-frequency well log data to the low-frequency seismic scale. Comparisons of calculated velocities from the self-consistent model to upscaled Backus-averaged velocities (at 20 Hz and 50 Hz) with a convergence of 0.5% made it possible to estimate pore aspect ratios as a function of depth. The first of two primary foci of this approach was to estimate pore shapes when a single fluid was emplaced in all the pores. This allowed for understanding pore shapes while minimizing the effects of pore fluids. Secondly, the effects of pore fluid properties were studied by comparing velocities for both patchy and uniform fluid saturation. These correspond to heterogeneous and homogeneous fluid mixing, respectively. Implementation of these fluid mixtures was to model them directly within the self-consistent approximation and by modeling dry-rock velocities, followed by standard Gassmann fluid substitution. P-wave velocities calculated by the self-consistent model for patchy saturation cases had larger values than those from Gassmann fluid substitution, but S-wave velocities were very similar. Pore aspect ratios for variable fluid properties were also calculated by both the self-consistent model and Gassmann fluid substitution. Pore aspect ratios determined for the patchy saturation cases were the smallest, and those for the uniform saturation cases were the largest. Pore aspect ratios calculated by Gassmann fluid substitution were larger because the velocity is inversely related to the aspect ratio in this particular modeling procedure. Estimates of pore aspect ratios for uniform saturation were 0.051 to 0.319 with the average of 0.171 from the velocity modeling using the self-consistent model. For patchy saturation, the aspect ratios were 0.035 to 0.296 with a mean of 0.145. These estimated pore aspect ratios from the patchy saturation case within the self-consistent model are considered the most reasonable set of values I determined. This is because the most likely in-situ fluid distribution is heterogeneous due to the extremely low permeability of the Haynesville Shale. Estimated pore aspect ratios using this modeling help us to understand elastic properties of the Haynesville Shale. In addition, this may help to find zones that correspond to optimal locations for fracturing the shale while considering brittleness and in-situ stress of the formation. / text