Thesis deals with the possibility of reducing the energy costs of a typical family house located in Brno. In the first part is a detailed calculation of heat loss of the building, considering heat gain and subsequent quantification of costs for heating, hot water and total annual costs. In other sections provide specific calculation of the economics for the partial implementations of planned procedures leading to a reduction in heating costs (replacing windows, doors, facades and floor ceiling). A calculation for changing the heating method and compared to the existing boiler. A possible reduction in the energy required when using energy from the Sun. In the penultimate section briefly review the options for what you get a subsidy from the grant program "New Green Savings Programme" and reduce the initial investment. Finally the comprehensive proposals of different options exchanges boiler insulation, replacing windows and doors, and the subsequent evaluation of the best solution when investing 350 000 CZK.

The thesis is focused on the economic comparison of heating sources for a particular object in terms of annual operating costs, initial investment costs, payback period, savings over the life of the investment resources and subjective comparisons. At the same time broaden their horizons in terms of obtaining information on technical innovations in the world of heating and an overview of the prices heating and energy sources.

Only in English.

The topic of my diploma thesis is air-water heat pumps. The diploma thesis contains three parts. In the first part I describe the theory of air-water heat pumps. In the second part I consider two variants of heating, hot water heating and pool water heating using air-water heat pumps in the family house, Révova. The third experimental part is focused on observation of operational process and calculation of heat factors of air-water heat pump while in the heating model. The calculated heating factors are then compared to the heating factors from the manufacturer's graph.

This diploma thesis is divided into three parts: theoretical, calculation and experimental measurement. The issue of humid air and air-conditioning in winter stadiums is elaborately analysed in the theoretical part. In the calculation part, the dessertation focuses on the optimization of current draft of hockey hall air conditioning system. The hall is now in operation during the season, which means from September to March. In the dissertation are discussed two variants of the draft. The first variant is draft upgrade to year-round operation with condensing dehumidification. The second option is solved as a combination of air handler unit system and absorption dehumidification. This variant is also designed for seasonal and year-round operation of the ice rink. At the end of the dissertation are all of them compared in terms of annual costs. The experimental measurement is carried out on dehumidification of air from areas with high water gains, in this case swimming pool hall model. This problematics is solved by changing the speed of ventilator and using Peltier generator.

Thesis Theme is a primary school, namely the outbuilding primary school Havlíčkův Brod, Konečná 1884. I suggest first grade pavilion and pavilion with school canteen with kitchens. Pavilions are based on the footings. Pavilions are designed as a two-way system from the wall HELUZ. Construction of ceiling are from ferroconcrete slabs are cross reinforced, single-layer roof is flat with a classic sequence of layers. In addition to construction and process layout I solved also the statics of building in specialize of concrete structures. The following are also evaluated heat and acoustic requirements and requirements for fire safety of buildings. New pavilions are solved as wheelchair accessible. Pavilion of the first grade has two floors with 5 classes of stem, 1 vocational and 2 classes are earmarked for after-school clubs. This pavilion is connected to the connecting neck between the former pavilon A and pavilion B. Dining pavilion has one floor, which is divided in the school canteen and kitchen is connected to the connecting neck leading to the gym. The land is mildly sloping to the south side. All consstructions comply with the applicable standards and recommendations ČSN.

The thesis aims to propose a system for heating and hot water for a family house, according to drawings supplied by the building architect. At the request of the investor as the primary object will be considered a variant of underfloor heating. For comparing the heat loss, economic and possibly to State subsidies system selected will be processed by an alternative option to the ventilation air heating. Underfloor heating and hot air are among the low-temperature heating system, which can use low temperature heat sources, such as heat pumps. This assumption corresponds to investor requests, the source of heat in a family house with a heat pump and gas boiler. For hot water will be used as an alternative to a fireplace in the living room. To use the results of the thesis is to calculate the heat loss and heat, according to current standards include design and hot-water heating system including hot-drawing documentation. Finally, the economic evaluation of different alternatives in terms of investment and operating costs.

Master´s thesis deals with an assessment of investment return in saving precurations. The issue is used on an ordinary detached family house. The assessment is done in more variants to reach an objective comparison of the most advantageous investments. In the first part there is a comprehensive theory explaining the connections of the procedures and the algorithms of the calculations. The second part is calculation, especially from the thermal engineering, energy rating of buildings and the economic return on investment. The third part is an evaluation which, on the basis of the experiences and the results from the thesis, offers a proces show to think in case of intended reconstruction and how to evaluate the efficiency of the investments in the saving precurations.

This diploma thesis deals with pressure losses in heating systems. The diploma thesis is divided into three sections. The first part is theoretical and deals with the occurrence of pressure losses. It discusses the properties of the fluid that affect pressure losses. It also deals with hydrodynamic phenomena, flow distribution, pressure loss distribution and its calculations. The aim of the second part, which is practical, was to create a heating project for a selected object. The object is a two-floor kindergarten building located in Velké Němčice. For this project, two heating variants were created. For the first variant, radiators and heating benches were designed and for the second variant, underfloor heating was installed in the building. The goal was to use a source which will gain heat mainly from renewable sources, so the air / water heat pump was chosen as the source of heat production. The project ends with a technical report. The third part of the thesis is dedicated to an experiment which purpose was to find out how the pressure losses of the connecting pieces are reacting to the change with the change of the heating water conditions (flow, temperature). Alongside, two pipes were created which differed in the type of connecting pieces so it allowed to compare how their pressure losses differ. Both pipes were connected by radial pressing, but the fittings differed in the quality of the brass, and therefore in the construction. Also, part of the experimental section of the diploma thesis is a description of the course of radial pressing of fittings from the Herz company.

The goal of the thesis is firstly to get all the information about the initial state of solved block of flats, which is located on the street Merhautova 76/954 in Brno – Černá pole, in terms of constructions, energy consumption and initial state of heating system. In the second part of the thesis, where are discussed the possibilities of reduction of energy consumption, variant drafts of reduction of energy consumption and their financial costs and the choice of optimal variant. Third part deals with assement of solved block of flats in terms of sustainable built environment by using tool to rate buildings in terms of sustainable built environment - SBToolCZ, evaluation of possibility to use renewables. In the end are written summaries and recommendations.