The environmentally unsafe by-products (CO2, H2S, NOx and SO2 for example) of using carbon-based fuels for energy generation have paved the way for research on cleaner, renewable and possibly cheaper alternative energy production methods. Hydrogen gas, which is considered as an energy carrier, can be applied in a fuel cell setup for the production of electrical energy. Although various methods of hydrogen production are available, sulphur-based thermochemical processes (such as the Hybrid Sulfur Process (HyS)) are favoured as alternative options for large scale application. The SO2 electrolyser is applied in producing H2 gas and H2SO4 by electrochemically converting SO2 gas and water. This study focused firstly on the evaluation of the performance of the SO2 electrolyser for the production of hydrogen and sulphuric acid, using commercially available PFSA (perfluorosulfonic acid) (Nafion®) as benchmark by evaluating i) various operating parameters (such as cell temperature and membrane thickness), ii) the influence of MEA (membrane electrode assembly) manufacturing parameters (hot pressing time and pressure) and iii) the effect of H2S as a contaminant. Subsequently, the suitability of novel PBI polyaromatic blend membranes was evaluated for application in an SO2 electrolyser. The parametric study revealed that, depending on the desired operating voltage and acid concentration, the optimisation of the operating conditions was critical. An increased cell temperature promoted both cell voltage and acid concentration while the use of thin membranes resulted in a reduced voltage and acid concentration. While an increased catalyst loading resulted in increased cell efficiency, such increase would result in an increase in manufacturing costs. Using electrochemical impedance spectroscopy at the optimised operating conditions, the MEA manufacturing process was optimised with respect to hot press pressure and time, while the effect of selected operating conditions was used to evaluate the charge transfer resistance, ohmic resistance and mass transport limitations. Results showed that the optimal hot pressing conditions were 125 kg.cm-2 and 50 kg.cm-2 for 5 minutes when using 25 and 10 cm2 active areas, respectively. The charge transfer resistance and mass transport were mostly influenced by the hot pressing procedure, while the ohmic resistance varied most with temperature. Applying the SO2 electrolyser in an alternative environment to the HyS thermochemical cycle, the effect of H2S on the SO2 electrolyser anode was investigated for the possible use of SO2 electrolysis to remove SO2 from mining off-gas which could contain H2S. Polarisation curves, EIS and CO stripping were used to evaluate the transient voltage response of various H2S levels (ppm) on cell efficiency. EIS confirmed that the charge transfer resistance increased as the H2S competed with the SO2 for active catalyst sites. Mass transport limitations were observed at high H2S levels (80 ppm) while the ECSA (electrochemical surface area obtained by CO stripping) showed a significant reduction of active catalyst sites due to the presence of H2S. Pure SO2 reduced the effective active area by 89% (which is desired in this case) while the presence of 80 ppm H2S reduced the active catalyst area to 85%. The suitability of PBI-based blend membranes in the SO2 electrolyser was evaluated by using chemical stability tests and electrochemical MEA characterisation. F6PBI was used as the PBI-containing base excess polymer which was blended with either partially fluorinated aromatic polyether (sFS001), poly(2,6-dimethylbromide-1,4-phenylene oxide (PPOBr) or poly(tetrafluorostyrene-4-phosphonic acid) (PWN) in various ratios. Some of the blend membranes also contained a cross-linking agent which was specifically added in an attempt to reduce swelling and promote cross-linking within the polymer matrix. The chemical stability of the blended membranes was confirmed by using weight and swelling changes, TGA-FTIR and TGA-MS. All membranes tested showed low to no chemical degradation when exposed to 80 wt% H2SO4 at 80°C for 120 h. Once the MEA doping procedure had been optimised, electrochemical characterisation of the PBI MEAs, including polarisation curves, voltage stepping and long term operation (> 24 h) was used to evaluate the MEAs. Although performance degradation was observed for the PBI membranes during voltage stepping, it was shown that this characterisation technique could be applied with relative ease, producing valuable insights into MEA stability. Since it is expected that the SO2 electrolyser will be operated under static conditions (cell temperature, pressure and current density) in an industrial setting (HyS cycle or for SO2 removal), a long term study was included. Operating the SO2 electrolyser under constant current density of 0.1 A cm-2 confirmed that PBI-based polyaromatic membranes were suitable, if not preferred, for the SO2 environment, showing stable performance for 170 hours. This work evaluated the performance of commercial materials while further adding insights into both characterisation techniques for chemical stability of polymer materials and electrochemical methods for MEA evaluation to current published literature. In addition to the characterisation techniques this study also provides ample support for the use of PBI-based materials in the SO2 electrolyser. / PhD (Chemistry), North-West University, Potchefstroom Campus, 2015

The environmentally unsafe by-products (CO2, H2S, NOx and SO2 for example) of using carbon-based fuels for energy generation have paved the way for research on cleaner, renewable and possibly cheaper alternative energy production methods. Hydrogen gas, which is considered as an energy carrier, can be applied in a fuel cell setup for the production of electrical energy. Although various methods of hydrogen production are available, sulphur-based thermochemical processes (such as the Hybrid Sulfur Process (HyS)) are favoured as alternative options for large scale application. The SO2 electrolyser is applied in producing H2 gas and H2SO4 by electrochemically converting SO2 gas and water. This study focused firstly on the evaluation of the performance of the SO2 electrolyser for the production of hydrogen and sulphuric acid, using commercially available PFSA (perfluorosulfonic acid) (Nafion®) as benchmark by evaluating i) various operating parameters (such as cell temperature and membrane thickness), ii) the influence of MEA (membrane electrode assembly) manufacturing parameters (hot pressing time and pressure) and iii) the effect of H2S as a contaminant. Subsequently, the suitability of novel PBI polyaromatic blend membranes was evaluated for application in an SO2 electrolyser. The parametric study revealed that, depending on the desired operating voltage and acid concentration, the optimisation of the operating conditions was critical. An increased cell temperature promoted both cell voltage and acid concentration while the use of thin membranes resulted in a reduced voltage and acid concentration. While an increased catalyst loading resulted in increased cell efficiency, such increase would result in an increase in manufacturing costs. Using electrochemical impedance spectroscopy at the optimised operating conditions, the MEA manufacturing process was optimised with respect to hot press pressure and time, while the effect of selected operating conditions was used to evaluate the charge transfer resistance, ohmic resistance and mass transport limitations. Results showed that the optimal hot pressing conditions were 125 kg.cm-2 and 50 kg.cm-2 for 5 minutes when using 25 and 10 cm2 active areas, respectively. The charge transfer resistance and mass transport were mostly influenced by the hot pressing procedure, while the ohmic resistance varied most with temperature. Applying the SO2 electrolyser in an alternative environment to the HyS thermochemical cycle, the effect of H2S on the SO2 electrolyser anode was investigated for the possible use of SO2 electrolysis to remove SO2 from mining off-gas which could contain H2S. Polarisation curves, EIS and CO stripping were used to evaluate the transient voltage response of various H2S levels (ppm) on cell efficiency. EIS confirmed that the charge transfer resistance increased as the H2S competed with the SO2 for active catalyst sites. Mass transport limitations were observed at high H2S levels (80 ppm) while the ECSA (electrochemical surface area obtained by CO stripping) showed a significant reduction of active catalyst sites due to the presence of H2S. Pure SO2 reduced the effective active area by 89% (which is desired in this case) while the presence of 80 ppm H2S reduced the active catalyst area to 85%. The suitability of PBI-based blend membranes in the SO2 electrolyser was evaluated by using chemical stability tests and electrochemical MEA characterisation. F6PBI was used as the PBI-containing base excess polymer which was blended with either partially fluorinated aromatic polyether (sFS001), poly(2,6-dimethylbromide-1,4-phenylene oxide (PPOBr) or poly(tetrafluorostyrene-4-phosphonic acid) (PWN) in various ratios. Some of the blend membranes also contained a cross-linking agent which was specifically added in an attempt to reduce swelling and promote cross-linking within the polymer matrix. The chemical stability of the blended membranes was confirmed by using weight and swelling changes, TGA-FTIR and TGA-MS. All membranes tested showed low to no chemical degradation when exposed to 80 wt% H2SO4 at 80°C for 120 h. Once the MEA doping procedure had been optimised, electrochemical characterisation of the PBI MEAs, including polarisation curves, voltage stepping and long term operation (> 24 h) was used to evaluate the MEAs. Although performance degradation was observed for the PBI membranes during voltage stepping, it was shown that this characterisation technique could be applied with relative ease, producing valuable insights into MEA stability. Since it is expected that the SO2 electrolyser will be operated under static conditions (cell temperature, pressure and current density) in an industrial setting (HyS cycle or for SO2 removal), a long term study was included. Operating the SO2 electrolyser under constant current density of 0.1 A cm-2 confirmed that PBI-based polyaromatic membranes were suitable, if not preferred, for the SO2 environment, showing stable performance for 170 hours. This work evaluated the performance of commercial materials while further adding insights into both characterisation techniques for chemical stability of polymer materials and electrochemical methods for MEA evaluation to current published literature. In addition to the characterisation techniques this study also provides ample support for the use of PBI-based materials in the SO2 electrolyser. / PhD (Chemistry), North-West University, Potchefstroom Campus, 2015

Thematic interrelation is an underdeveloped field of inquiry in Lukan studies. The design and elegance of Lukan theology begs for guided investigation into a possible system of organisation that governs history and theology, that is, narrative and theme. Based on the Greimasian Actantial Model, morpho–syntactical structural–critical analysis of Luke and Acts reveals that the covenant concept in its operative aspect of service functions as an organising principle, structuring the narratives and facilitating thematic interrelation. A survey of representative Lukan research consisting of five methodologically determined approaches shows a commonality regarding Lukan purpose. These all share the “plan of God” as a fundamental concept, thus intimating its plausibility as a common organisational principle in the text. This observation encourages further analysis of Lukan narrative and meta–narrative as relevant subject matter. Investigation into the purpose and goals of Ancient Jewish and Ancient Greek literature suggests that the concepts of piety/holiness and justness combined with a notion of divine order and expectation demonstrates organisational capacity. Under the terms and conditions of the Old Covenant three non–exclusive themes/concepts hold organisational functionality and ability to facilitate thematic interrelation: Exodus typology, the covenant concept and the eschaton idea. Exodus typology connects narrative with theme, developing Israel’s story. The covenant idea frames stories using parallelism and gives the meta–story progression. The eschaton idea presents the Day of YHWH as an organisational principle guiding the story of judgment to restoration. It is observed that the covenant concept is the most prevalent of these themes/ideas. Assuming the conceptual unity of Luke and Acts and adopting a morpho–syntactical structuralist approach, it was observed that the covenant concept in its operative aspect of service occurred as Helper at ten places, determining the development and structure of the meta–narrative. According to the Greimasian Actantial Model, Israel failed to fulfil its covenant–based mandate to serve God and shine God’s light of mercy to the nations. Jesus, Israel’s new Helper, becomes the Subject and by his covenant–based ministry, characterised as the greatest service, resolves the problem that prevents Israel from carrying out its divine mandate and sets the stage for its fulfilment. In Jesus Israel is given new leaders, an ethical platform of discipleship and the Holy Spirit. The apostle Paul as the epitomised and exemplary witness and servant of Jesus fulfils what Israel could not. He is vindicated in righteousness and shares in the Isaianic ministry of Jesus, to bear witness to leaders and to shine God’s light to the nations. Paul is unhindered in this ministry. Additionally, in thematic–critical terms, the key placement of the covenant concept in its operative aspect of service at plot–defining junctures features its catalytic dynamic as a “template” concept advancing the re–conceptualising of themes and providing a platform for meaningful relation. The evidence thus suggests that the covenant concept in its operative aspect structures the conjoined narratives of Luke and Acts. It also provides a basis for relation between the divine and humans in the context of the history of God’s salvation, linking history and theology, and makes possible a discernible means to thematic interrelation. The SO2 electrolysis was performed by supplying the anode of the cell with SO2 gas, while the water was fed to the cathode using graphite plates as flow fields. Initial experimental work was done at ambient pressures on the anode (SO2 gas–fed) and cathode (water–fed) after which the water pressure was increased from ambient to 1 bar. Various parameters were evaluated for SO2 electrolysis at ambient conditions, including operating temperature, membrane thickness and catalyst loading. The operating temperature was increased from 50oC to 80oC which resulted in a significant voltage improvement from 0.78V to 0.64V at 300mA/cm2. Operating the cell with thinner membranes (86 vs 170um) also resulted in an improved overall cell performance, while the catalyst loading (1 vs 0.5mgPt/cm2) had a negligible effect on the operating voltage. SEM images and EDX analysis were performed on the best performing MEA (N1135) which showed that no degradation of the MEA had occurred. / Thesis (M.Sc. (Chemistry))--North-West University, Potchefstroom Campus, 2011.

Thematic interrelation is an underdeveloped field of inquiry in Lukan studies. The design and elegance of Lukan theology begs for guided investigation into a possible system of organisation that governs history and theology, that is, narrative and theme. Based on the Greimasian Actantial Model, morpho–syntactical structural–critical analysis of Luke and Acts reveals that the covenant concept in its operative aspect of service functions as an organising principle, structuring the narratives and facilitating thematic interrelation. A survey of representative Lukan research consisting of five methodologically determined approaches shows a commonality regarding Lukan purpose. These all share the “plan of God” as a fundamental concept, thus intimating its plausibility as a common organisational principle in the text. This observation encourages further analysis of Lukan narrative and meta–narrative as relevant subject matter. Investigation into the purpose and goals of Ancient Jewish and Ancient Greek literature suggests that the concepts of piety/holiness and justness combined with a notion of divine order and expectation demonstrates organisational capacity. Under the terms and conditions of the Old Covenant three non–exclusive themes/concepts hold organisational functionality and ability to facilitate thematic interrelation: Exodus typology, the covenant concept and the eschaton idea. Exodus typology connects narrative with theme, developing Israel’s story. The covenant idea frames stories using parallelism and gives the meta–story progression. The eschaton idea presents the Day of YHWH as an organisational principle guiding the story of judgment to restoration. It is observed that the covenant concept is the most prevalent of these themes/ideas. Assuming the conceptual unity of Luke and Acts and adopting a morpho–syntactical structuralist approach, it was observed that the covenant concept in its operative aspect of service occurred as Helper at ten places, determining the development and structure of the meta–narrative. According to the Greimasian Actantial Model, Israel failed to fulfil its covenant–based mandate to serve God and shine God’s light of mercy to the nations. Jesus, Israel’s new Helper, becomes the Subject and by his covenant–based ministry, characterised as the greatest service, resolves the problem that prevents Israel from carrying out its divine mandate and sets the stage for its fulfilment. In Jesus Israel is given new leaders, an ethical platform of discipleship and the Holy Spirit. The apostle Paul as the epitomised and exemplary witness and servant of Jesus fulfils what Israel could not. He is vindicated in righteousness and shares in the Isaianic ministry of Jesus, to bear witness to leaders and to shine God’s light to the nations. Paul is unhindered in this ministry. Additionally, in thematic–critical terms, the key placement of the covenant concept in its operative aspect of service at plot–defining junctures features its catalytic dynamic as a “template” concept advancing the re–conceptualising of themes and providing a platform for meaningful relation. The evidence thus suggests that the covenant concept in its operative aspect structures the conjoined narratives of Luke and Acts. It also provides a basis for relation between the divine and humans in the context of the history of God’s salvation, linking history and theology, and makes possible a discernible means to thematic interrelation. The SO2 electrolysis was performed by supplying the anode of the cell with SO2 gas, while the water was fed to the cathode using graphite plates as flow fields. Initial experimental work was done at ambient pressures on the anode (SO2 gas–fed) and cathode (water–fed) after which the water pressure was increased from ambient to 1 bar. Various parameters were evaluated for SO2 electrolysis at ambient conditions, including operating temperature, membrane thickness and catalyst loading. The operating temperature was increased from 50oC to 80oC which resulted in a significant voltage improvement from 0.78V to 0.64V at 300mA/cm2. Operating the cell with thinner membranes (86 vs 170um) also resulted in an improved overall cell performance, while the catalyst loading (1 vs 0.5mgPt/cm2) had a negligible effect on the operating voltage. SEM images and EDX analysis were performed on the best performing MEA (N1135) which showed that no degradation of the MEA had occurred. / Thesis (M.Sc. (Chemistry))--North-West University, Potchefstroom Campus, 2011.