The objective of this dissertation is to study the switched reluctance machine (SRM) electromagnetic design and optimization. The research of electric machines is mostly driven by the motivation for higher efficiency and lower cost. The demands for high-performance electric machines also come from the development of emerging industries, such as electric vehicles (EV), hybrid electric vehicles (HEV), renewable energy conversion, energy storage and precision manufacturing. The additional requirements for those applications include volume, weight, speed, torque, reliability, fault tolerance capability, etc. The focus of the research effort is on the high speed and high torque applications, where the SRM stands out compared to other types of machines. The conventional design method significantly depends on the designer’s experience, which uses equivalent magnetic circuit models, and therefore the SRM design is not well developed. A novel SRM electromagnetic design and optimization method is developed, which uses the current-fed FEA simulation as the SRM performance estimation tool. This method serves as the main innovation of this research work. First, the proposed method is applicable to any SRM topologies and dimension, and no detailed modeling of a specific SRM configuration is required in advance. Therefore, an automated SRM design and optimization approach is developed. Secondly, great accuracy of the SRM electromagnetic analysis, e.g. flux density, torque, and current calculation, is achieved by using FEA simulation instead of simplified magnetic circuit approximations. This contribution is particularly significant when considering the poor accuracy of conventional SRM analytical analysis methods, where several assumptions and approximations are used. Lastly, the proposed design method takes the typical SRM control strategy into account, where the excitation current profile is characterized as a trapezoid. This method adapts the flux linkage of the first FEA simulation result to specify the excitation current profile for the second FEA simulation, so the calculated SRM performance in FEA simulation agrees with the measurement on a practical machine. The proposed SRM design and optimization method is used for a 12/8 SRM rotor design and for a complete 4/2 SRM design. These design examples validate the applicability of the proposed method to different SRM configurations and dimensions. Detailed design steps are presented for both design cases, and the selection of the parametric design variables are also discussed. The optimization results are demonstrated using multi-dimension diagrams, where the optimal design with the highest torque can be easily identified. The FEA simulation results are compared to the experimental results of a fabricated SRM prototype, and good agreement is found. In addition, a new rotor configuration with a flux bridge is proposed for an ultra high speed SRM design. The primary motivation of this rotor topology is to reduce the windgae losses and the acoustic noise at a high speed of 50,000 rpm. However, care must be taken for the flux bridge design, and the impact of different flux bridge thicknesses to the SRM performance is studied. Meanwhile, the manufacturing difficulties and the mechanical stresses should also be considered when fabricating the flux-bridge rotor. As a result, two SRM prototypes are built, and the two rotors are one without a flux bridge and one with a flux bridge. The prototypes are tested at different speeds (10,000 rpm, 20,000 rpm and 50,000 rpm) respectively, and the experimental results show good agreement with the FEA simulation results.

The demand for ultra-high-speed machines (UHSM) is rapidly growing in high-tech industries due to their attractive features. A-mechanically-based-antenna (AMEBA) system is another emerging application of UHSM. It enables portable wireless communication in the radio frequency (RF)-denied environment, which was not possible until recently. The AMEBA system requires a high-power (HP) UHSM for its effective communication performance. However, at the expected rotational speed range of 0.5 to 1 million rpm, the power level of UHSM is limited, and no research effort has succeeded to improve the power level of UHSM. The design of HP-UHSM is highly iterative, and it presents several critical challenges, unlike low-power UHSM, such as critical-bending-resonance (CBR), strong mutual influence among Multiphysics performances, exponential air-friction loss, and material limitation. When the magnetic loading of the UHSM rotor is increased to improve the power level, the rotor experiences serious mechanical vibration due to the excessive centrifugal forces and CBR. This vibration limits the operation of HP-UHSM and leads to structural breakdown. Furthermore, the design process becomes more critical when it considers the multidisciplinary design constraints and application requirements. This dissertation proposed a new Multiphysics design method to develop HP-UHSM for critical applications. First, the critical design constraints which prevent increasing the output power of UHSM are investigated. Then, a Multiphysics optimization model is developed by coupling several multidisciplinary analysis modules. This proposed optimization model enables (i) defining multidisciplinary design constraints, (ii) consideration of Multiphysics mutual influence, and (iii) a trade-off analysis between the efficiency and design-safety-margin. The proposed design model adopts the multiphase winding system to effectively increase the electrical loading in the slotless stator. Finally, a 2000 W 500,000 rpm HP-UHSM is optimized for an AMEBA system using the proposed design method. The optimized 2 kW 500,000 rpm machine prototype and its dynamo setup are built in the laboratory. Extensive finite element simulations and experimental testing results are presented to validate the effectiveness of the proposed design method. The results show that the proposed HP-USHM has 94.5% efficiency, 47 kW/L power density, 30% global design safety margin at the maximum speed and no CBR frequency below 11 kHz.

This master thesis deals with the suppression of the skin and proximity effects in high-speed machines. The first part summarizes the general knowledge of high-speed machines. The second part is devoted to the principle and possible suppression of consequences caused by skin and proximity effects. The third part shows the simulation results of models of a synchronous machine with permanent magnets. The results of these simulations reveal the consequences of skin and proximity effects. In addition, design measures are proposed to limit these and other undesirable phenomena to achieve the highest possible efficiency.

The thesis theme is the design of 3 MW high-speed permanent magnet synchronous motor. The work is divided into several parts, and contains the information given on the topic. The first part lists trends and new technologies of high-speed electric machines, and the issues and construction of high-speed synchronous machines are also listed here. In the second part, the machine is analytically designed from the specified values, which is then modelled in the RMxprt program. In the penultimate part, the engine is simulated by programs that are included in the ANSYS Electronics Desktop package, they are RMxprt and Maxwell. The modified engine model in RMxprt is simulated using defined formulas and then converted to Maxwell 2D, where the engine is simulated using the finite element method. In the last part, the results from the analytical calculation are compared with other high-speed machines. In addition, the results of simulations from RMxprt and Maxwell were compared in the last part.