The aim of the diploma thesis is processing of the design documentation to execution newly-built multifunctional building in the city part Brno - Řečkovice. Multifunctional building is a detached house, which is located in a quiet area on the edge city. This is a five floor building with four floor, one basement and flat roof. Building is rectangular shape. At the object are twelve parking spaces for cars. Vertical load-bearing structure are made of masonry and reinforced frame system, reinforced concrete floor and prestressed hollow core slab Spiroll. External facade building is created by render scrape texture and flush facade in ground floor.

The subject of the diploma thesis is new stand-alone hotel with a catering service and a relaxation zone including a fitness room, a table tennis room, massages and a solarium. The individual functional parts are separated and can be operated independently of each other. The Building consists of three floors. The ground floor will serve to run a restaurant with a background and a for relaxation zone, the remaining two floors will be used to accommodate guests and the necessary facilities. The maximum capacity for the accommodation is 59 people and requires four employees to operate it. The restaurant is designed for 81 guests and a total of 7 employees. The relaxation part is for guests only and is not accessible to other people. The structure is based on strip foundations from plain concrete and reinforced concrete foundation footing. Peripheral vertical load-bearing structures of the first above-ground floor are designed from permanent formwork system, all others loadbearing walls will be walled-up from vertically perforated block laid on thin-film adhesive. The floor structures are designed as an assembly of prestressed hollow core slabs. Roofing of the building will be made as a flat vegetation roof.

The content of the master thesis is processing of project documentation for he mountain boarding house in Zdobnice in Orlické hory, first done as a pilot project and then as a building construction project. It concerns a three floor building. Vertical load-bearing structures are made of ceramic blocks. Horizontal load-bearing structures are made of prestressed hollow core slabs. Roofing is solved with mono-pitched roof and flat roof. The access to building is from the west for the public and from the east for the staff. There is the ski and bike rental in this building.

This diploma thesis solves the project of four-storey, partly cellared mountain pension situated in the plant number 645/2 in the cadastral area in Deštné in Orlické hory. The building has a capacity of 44 seats to accommodate 72 persons in the restaurant and 57 persons in the wellness center. There is a wellness center with fitness room and engine room of air-conditioning system in the basement. There is an entrance hall with hotel base, restaurant, sanitary facilities and utility room with boiler room on the first floor. The second and third floor is designed for accommodation. There is an outdoor terrace of restaurant. The building has a load-bearing wall system. The load-bearing walls and the partition walls are bricked up of the porous concrete YTONG bricks and sand-lime bricks SILKA. The walls are insulated of mineral wool thickeness 200 mm and EPS Perimeter thickeness 140 mm underground section and plinth area. The ceiling structure are made of the prestressed hollow core panels spiroll thickness 250 mm and wooden beamed ceiling. There is a saddle wooden roof. The windows and the doors are made by the company Progress. The part of facade of the building is ventilated. This project is designed by the computer software ArchiCAD.

Theme of this diploma thesis is a newly buil building of prison in Moravské Budějovice. The buiding has four ground floors and is without cellar. The structural system of the building is made up of permanent formwork and system Porotherm. Ceiling construction is made up of reinforced hollow core slab. The building is covered with a flat roof.

The final thesis is focused on design of functional unit od Kindergarten in Křenovice (district Vyškov). The object is subdivided to 3 functional parts. The middle part is designed as a two-storey, remaining two parts are single-storey. Whole object is without cellart. This object is formed from two separate class for fifteen children each and the middle part is design for technical facilities . For every class are two teachers and in total one a head teacher. For the preparation food a cleaningup there are three employees. In the object is one office of speech therapy with barrier free access. The roofing of object is design as a warm vegetation flats roofs. The object is design as a masonry system of sand-lime block with contact thermal insulation system.

This diploma thesis presents a project documentation for construction of a center of leisure activities. It's construction site located on the outskirts of town Třebíč, "Na Kopcích" street. The building is composed from the two visual and three service parts which are connected to each other. On the left side in first floor there is a bowling with services and the second floor will serve for sport activities of jumping, spinning or relax massages. On the right side of building will be usable for education or for leisure activities. The building is designed as a two floors with partial basement. The construction system is formed by longitudinal wall system with precast hollow core slab or reinforced concrete slab. The structure is based on strip foundations with walls of permanent formwork. External wall is based on clay brick of therm type. The staircase is designed as prefabricated element or cast-in-place reinforced concrete. The roof is constructed as warm flat green roof with expanded polystyrene with screed to fall.

The final thesis is focused on reworking hospital pavilion from cast-in-place structure to precast concrete frame. Calculation of internal forces is made by software system SCIA Engineer. Main load-bearing elements are inner beam, outside beam and all columns in axis 2-C. This thesis contains assembly report, structural design, calculations and drawings of the designed parts, joint details, assembly material drawing and hand calculation.