The global push for increased renewable energy in power production is reshaping how industries approach energy systems. As the urgency to combat climate change grows, industries are integrating alternative power pathways alongside existing systems. This shift is driven by factors such as renewable energy adoption, energy storage advances, decentralization, electrification, circular economy principles, regulatory support, sustainability goals, and technological progress. These changes not only yield economic benefits but also enhance environmental and social impact. Integrating alternative pathways necessitates strategic planning, optimization, and a phased approach for seamless integration. Through these transformations, industries position themselves as sustainability leaders, align with climate goals, and ensure long-term energy security. The proposed implementation of a photovoltaic (PV) system at SSAB's steel production plant in Borlänge, specifically for forming line 4's electricity needs, will have a positive impact. This integration introduces renewable energy generation, offsetting the load and reducing reliance on the grid during peak hours, potentially leading to lower costs. It aligns with SSAB's environmental goals by curbing emissions, bolsters energy resilience, and aiding peak demand management. However, challenges in grid integration and infrastructure adjustments must be addressed for successful implementation. Overall, this move embodies SSAB's commitment to sustainability and efficient operations.  Through the utilization of simulation tools such as PVsyst and Homer Pro, an extensive study was conducted to investigate diverse scenarios involving combinations of a PV system, hydrogen modules, batteries, and a grid-connected load. The primary aim was to assess the feasibility of these scenarios within the energy system context. By leveraging PVsyst's capabilities for photovoltaic system analysis and Homer Pro's system optimization features, the study comprehensively examines interactions between electricity generation, storage, and consumption. This simulation-driven approach provided valuable insights into the performance dynamics, energy balance, and economic viability of each configuration, aiding in the informed selection of optimal combinations that align with the project's feasibility objectives. The results obtained suggest that the ideal size for the PV system in this context is 2.7 MW, allowing for an annual energy generation of 2.5 GWh. The electricity output aligns well with the yearly demand of 2.4 GWh for Forming Line 4 The results from different scenarios offer valuable insights into how integrating renewable energy and incorporating energy storage affect the overall efficiency and cost-effectiveness of the system. Each scenario was assessed in comparison to the base case of grid connection, uncovering a spectrum of LCOE values. It is noteworthy that the highest LCOE, reaching 0.12 €/kWh, was observed when all renewable resources were combined, whereas the lowest LCOE, at 0.059 €/kWh, was achieved with the PV system-only configuration.

Meeting electricity demand and power shortage remains as a challenge to the people of the Gambia. As the country is undergoing tremendous electricity accessibility expansion [1], to secure the environment for the future generation, it is necessary to consider renewable energy to be the major source of electricity production, to be specific, solar energy. This is because the country experiences the radiation from the sun throughout the year, it is sustainable not only to our environment for the future generations, but also economically. However, due to the intermittent nature of most renewable energy technologies, it is cumbersome to rely on them 100 % as a primary source of electricity production. Nonetheless, with suitable storage technologies, combination of different renewable sources, and intercountry grid connections can enhance to overcome this challenge. In this thesis work, designed and techno economic evaluation was carried out for high PV penetration that will meet 50 % electricity demand of the Gambia in year 2040. Three scenarios were considered in this study, based on the Strategic Electricity Roadmap 2020 to 2040 [1]. These scenarios are high, universal access (AU), and low electricity demand. Economically, 50 % electricity supply to meet the demand is possible for all the three cases. Consideration was mainly put on four key figures, thus, levelized cost of electricity (LCOE), payback period (PBP), net present cost (NPC) and solar fraction (SF). To achieve 50 % SF for the high electricity demand scenario, LCOE and PBP are 0.129 $/kWh and 12 years respectively. As for AU electricity demand case, 50 % SF is achieved with 0.126 $/kWh and 10 years for LCOE and PBP respectively. For low electricity demand scenario, 0.127 $/kWh and 10 years for LCOE and PBP respectively for 50 % SF. However, the optimum design recommended by HomerPro were 45 % SF with LCOE of 0.126 $/kWh and PBP of 9 years for high electricity demand scenario. As for the AU electricity demand case, the optimum design is 48 % SF, LCOE of 0.125 $/kWh, and PBP of 9 years. In the last scenario, which is low electricity demand case, 46 % SF, 0.124 $/kWh LCOE, and 9 years PBP.