Spelling suggestions: "subject:"homogeneous catalysis."" "subject:"momogeneous catalysis.""
1 |
New diphosphines with acenaphthene and phenylene backbonesBasra, Sandeep January 2002 (has links)
No description available.
|
2 |
Catalysts for stereoselective transformationsCooper, Christine J. January 2012 (has links)
No description available.
|
3 |
Continuous flow synthesis of silicon compounds as feedstock for solar-grade silicon productionChigondo, Fidelis January 2016 (has links)
This thesis describes the key steps in the production of high purity (solar-grade) silicon from metallurgical-grade silicon for use in the production of photovoltaic cells as alternative renewable, environmentally benign and cheap energy source. The initial part of the project involves the development and optimization of a small chemical production platform system capable of producing alkoxysilanes from metallurgical-grade silicon as green precursors to solar-grade silicon production. Specifically, the main aim of the study was to synthesize trialkoxysilanes in continuous flow mode, although the synthesis on monosilane was also done in batch mode. The alkoxylation reaction was carried out in a traditional slurry phase batch reactor, packed bed flow tubular reactor and also attempted in a continuous flow falling film tubular reactor. The effect of key parameters which affect the silicon conversion and selectivity for the desired trialkoxysilane were investigated and optimized using ethanol as a reagent model. The synthesis was then extended to the other alcohols namely methanol, n-propanol and n-butanol. Copper catalysts which were tested in the alkoxylation reaction included: CuCl, Cu(OH)2, CuO and CuSO4. CuCl and Cu(OH)2 showed comparable activity in the batch mode but the former was more efficient in the packed bed flow tubular reactor. Cu(OH)2 could be used as a non-halide catalyst but its activity is limited to short reaction cycles (<10 h). The uncatalysed reaction resulted in negligible reaction rates in both types of reactors. High temperature catalyst pre-heating (>500 oC) resulted in a lower rate of reaction and selectivity than when slightly lower temperatures are used (<350 oC) in both reactors, although much difference was noticed in the packed bed flow tubular reactor. Synthesis in the batch reactor needed longer silicon-catalyst activation time, higher pre-heating temperature and higher catalyst amounts as compare to the packed bed flow tubular reactor. Reaction temperature and alcohol flow rate influenced the reaction in both methods. The optimum reaction temperature range and alcohol flow rate was comparable in both reactors (230 to 240 oC) and 0.1mL/min respectively. The effect of alcohol R-group (C1 to C4) on the reaction revealed that conversion and selectivity generally decrease with an increase in carbon chain length in both methods. Ethanol showed highest selectivity (>95% in batch and >97% in flow) and conversion (about 88% in batch and about 64% in flow) as compared to all other alcohols studied showing that it could be the most efficient alkoxylation alcohol for this reaction. Overally, the packed bed flow tubular reactor resulted in higher selectivity to trialkoxysilanes than the batch system. Performing the reaction under pressure resulted in increased conversion but selectivity to the desire trialkoxysilane diminished. Synthesis in a continuous flow falling film tubular reactor was not successful as it resulted in very poor conversion and selectivity. Monosilane was successfully synthesized from the disproportionation of triethoxysilane using homogeneous and heterogeneous catalysts in batch mode. The results obtained from homogeneous catalysis showed that the reaction can be conducted at room temperature. The heterogeneous catalysis method resulted in slow conversion at room temperature but mild heating up to 55 oC greatly improved the reaction. Conducting the reaction under neat conditions produced comparable results to reactions which were carried out using solvents. The disproportionation reaction was best described by the first order kinetic model. The results obtained in this research indicate that the packed bed flow tubular reactor can be utilized with future modifications for continuous flow synthesis of alkoxysilanes as feedstock for the solar-grade silicon production.
|
4 |
New electron-poor phosphine ligands for hydroformylation and hydrocyanation catalysisMason, Katie Louise January 1997 (has links)
No description available.
|
5 |
Dehydrogenation of Formic Acid by a N,N-Bidentate Ru(II) Complex: Synthesis, Characterization, and Catalytic PerformanceAlshehri, Rawan 04 1900 (has links)
Alternative energy sources have been investigated for utilization in various applications to mitigate carbon dioxide emissions. The transportation sector is one of the major sectors that require the adaptation of renewable energy storage technologies for onboard applications. Formic acid is a liquid energy carrier that has the potential of replacing current fuels and mitigating carbon dioxide emissions through a circular carbon economy. The production of energy from formic acid can be achieved by homogenous catalysis to extract hydrogen from formic acid. The most promising metals for formic acid dehydrogenation in aqueous solution have been mainly ruthenium and iridium. While iridium has mostly surpassed ruthenium, further exploration of ruthenium is necessary because it is more economical.
This work presents the synthesis and catalytic performance of a N,N-bidentate Ru(II) complex. X-ray diffraction (XRD), nuclear magnetic resonance (NMR), and Mass spectrometry (MS) were used to confirm the structure of the catalyst. The title complex was found to be an efficient system for formic acid dehydrogenation to hydrogen gas and carbon dioxide in the aqueous phase. The highest TOF achieved is 656 h-1 in the presence of two equivalents of sodium formate to formic acid in water at 90 °C. There was no detection of carbon monoxide throughout the reaction process, suggesting the high selectivity of this catalytic system.
|
6 |
Modeling of homogeneous catalysis: from dft to qspr approachesAguado Ullate, Sonia 20 March 2012 (has links)
La catálisis es un campo de la ciencia que explora soluciones a los problemas ambientales como la contaminación, la eliminación de los residuos generados en el proceso de síntesis de materiales o la regeneración de los recursos naturales. En la presente Tesis, hemos reportado un estudio de cálculos DFT para la σ activación del enlace NH de amoníaco considerando las especies μ3-alquilidinos de titanio utilizando el complejo modelo [{Ti(η5-C5H5)(μ-O)}3(μ3-CH)]. Posteriormente, con el fin de analizar la hidroformilación asimétrica de estireno catalizada por complejos Rh-Binaphos, se han combinando estudios basados en la aproximación de la determinación del estado de transición y un análisis cualitativo a través de un descriptor molecular recién definido (volumen de distancia ponderada, VW). Usando nuestro conocimiento mecanicista anterior, hemos presentado un estudio QSPR para predecir la actividad y la enantioselectividad de la hidroformilación de estireno catalizada por complejos Rh-difosfinas. También, hemos desarrollado una nueva metodología 3D-QSSR para predecir la enantioselectividad basada en la cuantificación de la representación de diagramas por cuadrantes y aplicándola en el ciclopropanación asimétrica de alquenos catalizadas por complejos de cobre. / Catalysis is a field of science that explores solutions to environmental problems such as pollution, elimination of waste generated in the process of materials synthesis or regeneration of natural resources. In the present Thesis, we have reported a DFT study on the N-H σ-bond activation of ammonia by the µ3-alkylidyne titanium species using the [{Ti(η5-C5H5)(µ-O)}3(µ3-CH)] model complex. Afterwards, we have combined the TS-based approach and qualitative analysis through a newly defined molecular descriptor (distance-weighted volume, VW), in order to analyze the asymmetric hydroformylation of styrene catalyzed by Rh-binaphos complexes. Using our previous mechanistic knowledge, we have presented a QSPR study to predict the activity and the enantioselectivity in the hydroformylation of styrene catalyzed by Rh-diphosphane complexes. We have also developed a new methodology to predict enantioselectivity based on the quantitative quadrant-diagram representation of the catalysts and 3D-QSSR modeling; and we have applied it in the asymmetric cyclopropanation of alkenes catalyzed by copper complexes.
|
7 |
Olefin Metathesis: Life, Death, and SustainabilityLummiss, Justin Alexander MacDonald January 2015 (has links)
Over the past 15 years, ruthenium-catalyzed olefin metathesis has emerged as a cornerstone synthetic methodology in academia. Applications in fine-chemicals and pharmaceutical manufacturing, however, are just beginning to come on stream. Industrial uptake has been impeded by economic constraints associated with catalyst costs. These are due both to direct costs (exacerbated by intellectual property issues), and to further pressure exerted by the low turnover numbers attainable, and the need for extensive purification to remove ruthenium residues. From another perspective, however, these difficulties can be seen as arising from our rudimentary understanding of the fundamental organometallic chemistry of the Ru=CHR bond.
In particular, we know little about the nature and reaction pathways of the Ru-methylidene unit present in the active species that propagates metathesis, and in the catalyst resting state. We know slightly more about the ruthenacyclobutane species, but still too little to guide us as to their non-metathetical reaction pathways, their contribution to deactivation relative to the methylidene species, and potential work-arounds. This thesis work was aimed at improving our understanding of the reactivity, speciation, and decomposition of key ruthenium intermediates in olefin metathesis. A major focus was the behaviour and deactivation of species formed from the second-generation Grubbs catalyst RuCl2(H2IMes)(PCy3)(=CHPh) (S-GII), which dominates ring-closing metathesis. Also studied were derivatives of the corresponding IMes catalyst A-GIIm, containing an unsaturated Nheterocyclic
carbene (NHC) ligand. The methylidene complexes RuCl2(NHC)(PCy3)(=CH2) (GIIm) represent the resting state of
the catalyst during ring-closing and cross-metathesis reactions: that is, the majority Ru species
present during catalysis. Mechanistic studies of these key intermediates have been restricted,
however, by the low yields and purity with which they could be accessed. Initial work therefore
focused on designing a clean, high-yield route to the second-generation Grubbs methylidene
complexes S-GIIm and A-GIIm. These routes were subsequently expanded to develop access to
isotopically-labelled derivatives. Locating a 13C-label at the key alkylidene site, in particular,
offers a powerful means of tracking the fate of the methylidene moiety during catalyst
deactivation. Access to GIIm enabled detailed studies of the behaviour and decomposition of the Grubbs
catalysts. First, the long-standing question of the impact of saturation of the NHC backbone (i.e.
IMes vs. H2IMes) was examined. Dramatic differences in the behaviour of the two complexes
were traced to profound differences in PCy3 lability arising from the diminished π-acidity of the
IMes ligand. Secondly, the vulnerability of GIIm to nucleophiles was examined. This is an
important issue from the perspective of decomposition by adventitious nucleophiles in the
reaction medium during catalysis, but also reflects on substrate scope. For amine additives, the
dominant deactivation pathway was shown to typically involve attack on the resting-state
methylidene complex, not the metallacyclobutane, which has often been regarded as the most
vulnerable intermediate. In addition, the sigma-alkyl intermediate formed by nucleophilic attack
of displaced phosphine at the methylidene carbon was trapped by moving to the first-generation
complex, and using a nitrogen donor (pyridine) that cannot promote decomposition via N–H
activation pathways. Interception of this long-suspected species led to the proposal of “donorinduced”
deactivation as a general decomposition pathway for Grubbs-class catalysts.
Finally, the capacity of phosphine-free catalysts to overcome the shortcomings of the secondgeneration
Grubbs catalysts was demonstrated, in a case study involving application of crossmetathesis
(CM) to the synthesis of a high-value antioxidant. An efficient CM methodology was
developed for the reaction of renewable essential-oil phenylpropenoids with vinyl acrylates. This
work illustrates a new paradigm in sustainable metathesis. Rather than degrading unsaturated
feedstocks via metathesis (a process that can be termed “metathe[LY]sis”), it demonstrates how
metathesis with directly-functionalized olefins can be used to augment structure and function.
From the perspective of organometallic chemistry and catalyst design, key comparisons built
into this thesis are the effect of the NHC ligand (IMes vs. H2IMes) and its trans ancillary ligand
on the efficient entry into catalysis; the susceptibility to nucleophilic attack of the alkylidene
ligand (benzylidene vs. methylidene) vs. the metallacyclobutane; and the effect of replacing a
phosphine ancillary ligand with a non-nucleophilic donor.
From a practical standpoint, Chapter 2 brings new life to metathesis with the high-yield
synthesis of the resting state species, Chapters 3 and 4 examine the deactivation, or death, of the
methylidene complexes, and Chapter 5 establishes a new paradigm for olefin metathesis within
the context of sustainable synthesis.
|
8 |
Coordination Chemistry of Bis(diphenylphosphino)amine Ligands with Cobalt Carbonyl and the Intermolecular Catalyzed Pauson-Khand ReactionMerrill, James Malcolm 11 January 2002 (has links)
Bis(diphenylphosphino)amine (PNP) ligands, prepared from (S)-(-)-1-methylbenzyl amine, (-)-cis-myrtanylamine, (S)-(-)-1,1-napthyl(ethyl)amine (PNP1 1a, PNP2 1b, and PNP3 1c respectively) and their cobalt carbonyl complexes are reported. In the absence of alkynes the PNP ligands chelate to the cobalt rather than bridging the two cobalt centers. Although the PNP ligands are chiral the crystal structures are best solved in centrosymmetric space groups with disorder at the chiral carbon with the exception of (PNP3)Co2(CO)6, 2c, which is solved in a non-centrosymmetric space group.
When the PNP ligand chelates to cobalt, as in 2, the compounds show activity for the catalytic Pauson-Khand reaction, whereas when the PNP ligand bridges, as in 3, the reaction precedes stiochiometrically. The use of these chiral ligands has not yet resulted in enantioselective catalytic Pauson-Khand cycloadditions. However, a small 15% e.e. was detected for the stiochiometric Pauson-Khand cycloaddition with 3c as the metal substrate. / Master of Science
|
9 |
Synthesis and reactivity studies of mono- and diaurated species bearing N-heterocyclic carbene ligandsGómez Suárez, Adrián January 2014 (has links)
The use of Au-NHC complexes in homogenous gold catalysis has become very popular during the last 10 years. The work described in this thesis represents a modest contribution towards a better understanding of the reactivity of these fascinating complexes and the intermediate species involved during gold-catalysed transformations. There are two main themes that permeate the following chapters: a) synthesis and reactivity studies of monoaurated species and b) synthesis and reactivity studies of diaurated species. The main motivation for the work presented herein was to develop more efficient synthetic routes towards a series of gold complexes, such as [Au(NHC)Cl], [Au(NHC)(OH)] and [{Au(IPr)}₂(μ-OH)][X], in order to be able to further explore their reactivity. Chapter 2 constitutes the first approach that I had with the chemistry of Au-NHC complexes, and describes our efforts to evaluate how the use of a highly sterically demanding NHC ligand affects gold-catalysed transformations. Chapters 3 and 4 explore alternative, more efficient synthetic routes towards known Au- NHC complexes. For example, a new, highly robust protocol has been developed for the synthesis of [Au(NHC)X] (X = Cl, Br, I) complexes, which are the starting materials to prepare a wide range of Au-NHC based species. Moreover, as a result of our investigations it has been possible to isolate a series of [Au(NHC)(OH)] species and to gain some insight into the stability of these complexes. Chapters 5 and 6 describe the synthesis and applications of digold hydroxide species [{Au(IPr)}₂(μ-OH)][X] in a series of catalytic and stoichiometric transformations. For example, they have been used as silver-free catalysts for water-inclusive gold-catalysed transformations or to access key intermediates in gold catalysis, such as gem-diaurated and σ,π-digold-acetylide species. Finally, Chapter 7 combines what we learned about the reactivity of [{Au(IPr)}₂(μ- OH)][X] in order to develop for the first time a gold-catalysed transformation where two gold centres independently react with two substrate molecules to catalyse the hydrophenoxylation of alkynes.
|
10 |
Development of Ruthenium Catalysts for Water OxidationLaine, Tanja M. January 2016 (has links)
An increasing global energy demand requires alternative fuel sources. A promising method is artificial photosynthesis. Although, the artificial processes are different from the natural photosynthetic process, the basic principles are the same, i.e. to split water and to convert solar energy into chemical energy. The energy is stored in bonds, which can at a later stage be released upon combustion. The bottleneck in the artificial systems is the water oxidation. The aim of this research has been to develop catalysts for water oxidation that are stable, yet efficient. The molecular catalysts are comprised of organic ligands that ultimately are responsible for the catalyst structure and activity. These ligands are often based on polypyridines or other nitrogen-containing aromatic compounds. This thesis describes the development of molecular ruthenium catalysts and the evaluation of their ability to mediate chemical and photochemical oxidation of water. Previous work from our group has shown that the introduction of negatively charged groups into the ligand frameworks lowers the redox potentials of the metal complexes. This is beneficial as it makes it possible to drive water oxidation with [Ru(bpy)3]3+-type oxidants (bpy = 2,2’-bipyridine), which can be photochemically generated from the corresponding [Ru(bpy)3]2+ complex. Hence, all the designed ligands herein contain negatively charged groups in the coordination site for ruthenium. The first part of this thesis describes the development of two mononuclear ruthenium complexes and the evaluation of these for water oxidation. Both complexes displayed low redox potentials, allowing for water oxidation to be driven either chemically or photochemically using the mild one-electron oxidant [Ru(bpy)3]3+. The second part is a structure–activity relationship study on several analogues of mononuclear ruthenium complexes. The complexes were active for water oxidation and the redox potentials of the analogues displayed a linear relationship with the Hammet σmeta parameter. It was also found that the complexes form high-valent Ru(VI) species, which are responsible for mediating O–O bond formation. The last part of the thesis describes the development of a dinuclear ruthenium complex and the catalytic performance for chemical and photochemical water oxidation. It was found that the complex undergoes O–O bond formation via a bridging peroxide intermediate, i.e. an I2M–type mechanism.
|
Page generated in 0.0843 seconds