This dissertation entitled "Project and surveying of the network for planimetry and height points of the detailed minor horizontal control in a chosen area" aims to build a detailed minor horizontal control in a target area, located in the cadastral area Jenín and Horní Kaliště, that would serve as a basis for future detailed measurements. Prior to the field measurements I assembled existing materials and carried out a reconnaissance. After finding the density of current minor control, the detailed minor horizontal control was completed with 14 points. 7 of them make the subject of this dissertation. Surveying work was carried out using geodetic and GPS methods. As a geodetic method I used the method of plane network, from GPS methods I chose the GPS fast static method. Next I created necessary graphic attachments. Finally, I used all the gained data to conduct the evaluation and comparison of the particular activities and technologies.

This thesis deals with "Design and Development of the Network of Points of the Detailed Minor Horizontal Control using Geodetic and GPS Methods" in the cadastral territory Jenín and Horní Kaliště. Using the map basis I conducted the reconnaissance and analysis of the current level of the minor control points in the target territory. Next I stabilized 14 new points of the DMHC, however, this thesis uses only 7 of these 14 points. The work aims to analyze the current level of the minor control and if needed to increase the field density for detailed large-scale mapping. For this purpose I used total station Leica TCR 407 power for the geodetic method and Trimble 4600LS device for the GPS method. Consequently I analyzed the accuracy of both methods.

This Graduation Thesis was elaborated on the following topic: ``Design and Development of the Network of Points of the Detailed Minor Horizontal Control (``DMHC{\crq}q) by the Geodetic and GPS Methods in the Basin of the Jeninsky Stream{\crq}q. The goal of the Thesis was to reconnoitre the part of the basin of the Jeninsky Stream, analyze current level of the minor control in this locality, amend current horizontal minor control in the density for detailed large-scale mapping and locate minor control by the geodetic and GPS methods. The given locality was reconnoitred based on the map basis and geodetic data. Afterwards, I carried out monumentation of new points of the DMHC and then their positional determination by the geodetic and GPS methods. The network of 16 points of the DMHC was created, for this Graduation Thesis was used 8 of them. The electronic total station Leica TCR 407 power was used for the determination by the geodetic method and Trimble 4600LS device was used for the GPS method.

Submitted by Fabio Sobreira Campos da Costa (fabio.sobreira@ufpe.br) on 2016-06-29T14:04:23Z No. of bitstreams: 2 license_rdf: 1232 bytes, checksum: 66e71c371cc565284e70f40736c94386 (MD5) CFCH_Mest_CiencPol_Dissert_ArranjInstitTCsBRePT_VersaoFinal_Extensao_PDF.pdf: 1092529 bytes, checksum: 9ad819610447a70cf0d30ec7d7a7aaf2 (MD5) / Made available in DSpace on 2016-06-29T14:04:23Z (GMT). No. of bitstreams: 2 license_rdf: 1232 bytes, checksum: 66e71c371cc565284e70f40736c94386 (MD5) CFCH_Mest_CiencPol_Dissert_ArranjInstitTCsBRePT_VersaoFinal_Extensao_PDF.pdf: 1092529 bytes, checksum: 9ad819610447a70cf0d30ec7d7a7aaf2 (MD5) Previous issue date: 2013-07-11 / CAPEs / O presente trabalho proporcionará duas contribuições fundamentais: conhecimento empírico sobre os arranjos institucionais dos Tribunais de Contas da União e de Portugal; e o fato de se constituir em estudo comparativo, área pouco explorada academicamente. Em outras palavras, propõe-se efetuar uma pesquisa descritivo-comparativa entre os arranjos institucionais destes órgãos de controle externo. Para tanto, a partir da literatura sobre neo-institucionalismo – adotando-se a visão do institucionalismo histórico, accountability horizontal, estudos comparados e dos próprios tribunais de contas, derivaram-se sete objetivos de pesquisa referentes ao controle horizontal exercido pelo Tribunal de Contas da União, pós Constituição de 1988, e pelo Tribunal de Contas de Portugal, pós Revolução de 1974, quais sejam: a) identificar quais são os arranjos institucionais dos Tribunais de Contas da União e de Portugal; b) avaliar quais as semelhanças e diferenças presentes em cada instituição analisada; c) avaliar se o arranjo institucional – regras, procedimentos, atores decisórios – de cada instituição pesquisada lhes permite exercer de maneira independente suas funções constitucionais; d) averiguar se estas instituições possuem mecanismos coercitivos capazes de fazer valer suas decisões; e) verificar se seus membros são revestidos das garantias necessárias à atuação também independente; f) analisar se sua estrutura burocrática é aparelhada com quadros técnicos adequados a exercerem as complexas tarefas relacionadas ao controle administrativo-financeiro; g) comparar os dados obtidos a fim de compreender como estas instituições em interação com o contexto político criam condições favoráveis (ou desfavoráveis) à accountability, afetando a capacidade dos representados de controlarem seus representantes. Num primeiro momento, a pesquisa se destina a conhecer e descrever os arranjos institucionais das instituições de controle a partir de questões básicas relativas à estruturação e ao funcionamento de cada um dos países estudados. A par destas informações, adentra-se, na sequencia, à fase analítica do trabalho, em que os dados obtidos são comparados. Por fim, as conclusões apontam as condições favoráveis para o exercício da accountability, bem como reforçam a necessidade de novos estudos para aprofundamento das discussões sobre o tema proposto. / This work will provide two fundamental contributions: empirical knowledge about the institutional arrangements of the Courts of Audit and Portugal, and the fact constitute comparative study, little explored area academically. In other words, it is proposed to make a descriptive-comparative institutional arrangements of these external control bodies. Therefore, from the literature on neo-institutionalism - adopting the vision of historical institutionalism, horizontal accountability, and comparative studies of their own courts of accounts, were derived seven research objectives for the horizontal control exercised by the Court of Union, after the 1988 Constitution, and the Court of Portugal, after the 1974 Revolution, which are: a) to identify what are the institutional arrangements of the Courts of Audit and Portugal b) assess what the similarities and differences present in each institution analyzed c) assess whether the institutional arrangement - rules, procedures, decision-making actors - each research institution allows them to exercise their functions independently constitutional d) determine whether these institutions have coercive mechanisms able to enforce its decisions; e) verify that its members are coated with the guarantees necessary for the independent performance also f) whether its bureaucratic structure is rigged with adequate technical staff to carry out the complex tasks related to the administrative and financial control; g) compare the data obtained in order to understand how these institutions interact with the political context are favorable (or unfavorable) to accountability, affecting the ability of the represented control their representatives. Initially, the research is designed to discover and describe the institutional arrangements of the institutions of control from the basic issues relating to the structuring and operation of each of the countries studied. Alongside this information, enters up, in sequence, the analytical phase of the work, in which the data obtained are compared. Finally, the findings indicate favorable conditions for the exercise of accountability, and reinforce the need for further studies to further the discussion on the proposed topic.

This master´s thesis is focused by problematic of creation railway map of the canceled mining railway in section Zbýšov u Oslavan – Babice u Rosic. This railway is being rebuilt to narrow gauge. The purpose was building of horizontal control, measuring of rail axis and surveying points. It issued from the legislation for this purpose. At next parts is given the procedure of preparatory, surveys, calculations and visualizing works.

The main fokus of this D thesis consists in the creating of horizontal points in Lešná village that is closed to Valašské Meziříčí, part Vysoká. Sixty five points of horizontal control (PPBP) were located and set in Vysoká. The network adjustment was done with the help of the method of lest squares and coordinates were counted with the G-NET/Mini programme.