No description available.

Thesis: M.S., Massachusetts Institute of Technology, Department of Mechanical Engineering, 1979 / Bibliography: leaves 38-39. / by Michio Takahashi. / M.S. / M.S. Massachusetts Institute of Technology, Department of Mechanical Engineering

Display/control gain is the amount of movement that occurs on a display in response to a unit amount of movement on the control. Two studies were conducted to determine the adequacy of identifying the optimum gain for an interface as a method of control-display interface optimization. The first study examined the effects of changes in both the maximum control input and the display width on target acquisition performance with a touch tablet and a trackball. The hypothesis that an interaction between the control input and the display output would determine performance was not supported for either device. There was a main effect of the control input for the touch tablet, and significant effects of the control input and the display width for the trackball. The results also indicate that, at least for the touch tablet, gain is not a sufficient specification for performance. The second study evaluated the effects of changes in the display amplitude, the display target width, and the control amplitude. There were significant interactions among these three factors for both touch tablet and trackball target acquisition performance. These results extend the findings of the first study with respect to the inability of gain to predict performance. In addition, the inadequacy of Fitts' Law as it applies to the given interfaces is discussed. / Ph. D. / incomplete_metadata

Even with the advance of autonomous robotics and automation, many automated tasks still require human intervention or guidance to mediate uncertainties in the environment or to execute the complexities of a task that autonomous robots are not yet equipped to handle. As such, robot controllers are needed that utilize the strengths of both autonomous agents, adept at handling lower level control tasks, and humans, superior at handling higher-level cognitive tasks. To address this need, we develop a control theoretic framework that seeks to incorporate user commands such that user intention is preserved while an automated task is carried out by the controller. This is a novel approach in that system theoretic tools allow for analytic guarantees of feasibility and convergence to goal states which naturally lead to varying levels of autonomy. We develop a model predictive controller that takes human input, infers human intent, then applies a control that minimizes deviations from the intended human control while ensuring that the lower-level automated task is being completed. This control framework is then evaluated in a human operator study involving a shared control task with human guidance of a mobile robot for navigation. These theoretical and experimental results lay the foundation for applying this control method for human-robot cooperative control to actual human-robot tasks. Specifically, the control is applied to a Urban Search and Rescue robot task where the shared control of a quadruped rescue robot is needed to ensure static stability during human-guided leg placements in uneven terrain. This control framework is also extended to a multiple user and multiple agent system where the human operators control multiple agents such that the agents maintain a formation while allowing the human operators to manipulate the shape of the formation. User studies are also conducted to evaluate the control in multiple operator scenarios.

Recent decades have been witness to explosive leaps in manufacturing productivity. Advances in communication technology, computing speed, control theory, and sensing technology have been significant contributors toward the increased productivity and efficiency that industry has exhibited. The continued growth of technological equipment and engineering knowledge challenges engineers to fully utilize these advancements in more sophisticated and useful automation systems. One such application involves enhancing bridge and gantry crane operation. These systems are used throughout the globe, and are critical aspects of industrial productivity. Consequently, improving the operational effectiveness of cranes can be extremely valuable. Effective control of cranes can be largely attributed to two distinct, but related aspects crane manipulation: 1) the expertise of operators, which are responsible for issuing commands to the structures, and 2) the dynamic properties of cranes, which influence how the structures respond to issued commands. Accordingly, the operational efficiency of cranes can be influenced by changing both the way that operators issue commands to cranes, and also how the crane responds to issued commands. This thesis is concerned with dynamic control theory of flexible machines, and human/machine interaction, especially as these areas relate to industrial crane control. In the area of dynamic control, this thesis investigates control strategies that are specifically suited for use on systems that possess common actuator nonlinearities, like saturation, rate limiting, dead-zone, backlash, and finite-state actuation. In the area of human/machine interaction, this thesis investigates the effects of different crane interface devices on the operational efficiency of cranes.