Thesis (M.S.)--Rochester Institute of Technology, 2009. / Typescript. Includes bibliographical references (leaves 70-73).

This work describes the development of a hybrid rocket propulsion system for a reusable sounding rocket, as part of the first phase of the UKZN Phoenix Hybrid Sounding Rocket Programme. The programme objective is to produce a series of low-to-medium altitude sounding rockets to cater for the needs of the African scientific community and local universities, starting with the 10 km apogee Phoenix-1A vehicle. In particular, this dissertation details the development of the Hybrid Rocket Performance Code (HRPC) together with the design, manufacture and testing of Phoenix-1A’s propulsion system. The Phoenix-1A hybrid propulsion system, generally referred to as the hybrid rocket motor (HRM), utilises SASOL 0907 paraffin wax and nitrous oxide as the solid fuel and liquid oxidiser, respectively. The HRPC software tool is based upon a one-dimensional, unsteady flow mathematical model, and is capable of analysing the combustion of a number of propellant combinations to predict overall hybrid rocket motor performance. The code is based on a two-phase (liquid oxidiser and solid fuel) numerical solution and was programmed in MATLAB. HRPC links with the NASA-CEA equilibrium chemistry programme to determine the thermodynamic properties of the combustion products necessary for solving the governing ordinary differential equations, which are derived from first principle gas dynamics. The combustion modelling is coupled to a nitrous oxide tank pressurization and blowdown model obtained from literature to provide a realistic decay in motor performance with burn time. HRPC has been validated against experimental data obtained during hot-fire testing of a laboratory-scale hybrid rocket motor, in addition to predictions made by reported performance modelling data. Development of the Phoenix-1A propulsion system consisted of the manufacture of the solid fuel grain and incorporated finite element and computational fluid dynamics analyses of various components of the system. A novel casting method for the fabrication of the system’s cylindrical single-port paraffin fuel grain is described. Detailed finite element analyses were performed on the combustion chamber casing, injector bulkhead and nozzle retainer to verify structural integrity under worst case loading conditions. In addition, thermal and pressure loading distributions on the motor’s nozzle and its subsequent response were estimated by conducting fluid-structure interaction analyses. A targeted total impulse of 75 kNs for the Phoenix-1A motor was obtained through iterative implementation of the HRPC application. This yielded an optimised propulsion system configuration and motor thrust curve. / Thesis (M.Sc.Eng.)-University of KwaZulu-Natal, Durban, 2013.

Sounding rockets find applications in multiple fields of scientific research including meteorology, astronomy and microgravity. Indigenous sounding rocket technologies are absent on the African continent despite a potential market in the local aerospace industries. The UKZN Phoenix Sounding Rocket Programme was initiated to fill this void by developing inexpensive medium altitude sounding rocket modeling, design and manufacturing capacities. This dissertation describes the development of the Hybrid Rocket Performance Simulator (HYROPS) software tool and its application towards the structural design of the reusable, 10 km apogee capable Phoenix-1A hybrid sounding rocket, as part of the UKZN Phoenix programme. HYROPS is an integrated 6–Degree of Freedom (6-DOF) flight performance predictor for atmospheric and near-Earth spaceflight, geared towards single-staged and multi-staged hybrid sounding rockets. HYROPS is based on a generic kinematics and Newtonian dynamics core. Integrated with these are numerical methods for solving differential equations, Monte Carlo uncertainty modeling, genetic-algorithm driven design optimization, analytical vehicle structural modeling, a spherical, rotating geodetic model and a standard atmospheric model, forming a software framework for sounding rocket optimization and flight performance prediction. This framework was implemented within a graphical user interface, aiming for rapid input of model parameters, intuitive results visualization and efficient data handling. The HYROPS software was validated using flight data from various existing sounding rocket configurations and found satisfactory over a range of input conditions. An iterative process was employed in the aerostructural design of the 1 kg payload capable Phoenix-1A vehicle and CFD and FEA numerical techniques were used to verify its aerodynamic and thermo-structural performance. The design and integration of the Phoenix-1A‟s hybrid power-plant and onboard electromechanical systems for recovery parachute deployment and motor oxidizer flow control are also discussed. It was noted that use of HYROPS in the design loop led to improved materials selection and vehicle structural design processes. It was also found that a combination of suitable mathematical techniques, design know-how, human-interaction and numerical computational power are effective in overcoming the many coupled technical challenges present in the engineering of hybrid sounding rockets. / Thesis (M.Sc.)-University of KwaZulu-Natal, Durban, 2012.

The University of KwaZulu-Natal (UKZN) Phoenix Hybrid Sounding Rocket Programme was established in 2010. The programme’s main objective is to develop a sounding rocket launch capability for the African scientific community, which currently lacks the ability to fly research payloads to the upper atmosphere. In this dissertation, UKZN’s in-house Hybrid Rocket Performance Simulator (HYROPS) software is used to improve the design of the Phoenix-2A vehicle, which is intended to deliver a 5 kg instrumentation payload to an apogee altitude of 100 km. As a benchmarking exercise, HYROPS was first validated by modelling the performance of existing sub-orbital sounding rockets similar in apogee to Phoenix-2A. The software was found to approximate the performance of the published flight data within 10%. A generic methodology was then proposed for applying HYROPS to the design of hybrid propellant sounding rockets. An initial vehicle configuration was developed and formed the base design on which parametric trade studies were conducted. The performance sensitivity for varying propulsion and aerodynamic parameters was investigated. The selection of parameters was based on improving performance, minimising cost, safety and ease of manufacturability. The purpose of these simulations was to form a foundation for the development of the Phoenix-2A vehicle as well as other large-scale hybrid rockets. Design chamber pressure, oxidiser-to-fuel ratio, nozzle design altitude, and fin geometry were some of the parameters investigated. The change in the rocket’s propellant mass fraction was the parameter which was found to have the largest effect on performance. The fin and oxidiser tank geometries were designed to avoid fin flutter and buckling respectively. The oxidiser mass flux was kept below 650 kg/m2s and the pressure drop across the injector relative to the chamber pressure was maintained above 15% to mitigate the presence of combustion instability. The trade studies resulted in an improved design of the Phoenix-2A rocket. The propellant mass of the final vehicle was 30 kg less than the initial conceptual design and the overall mass was reduced by 25 kg. The Phoenix-2A vehicle was 12 m in length with a total mass of 1006 kg. The fuel grain length of Phoenix-2A was 1.27 m which is approximately 3 times that of Phoenix-1A. The benefit of aluminised paraffin wax as a fuel was also investigated. The results indicated that more inert mass can be delivered to the target apogee of 100 km when using a 40% aluminised paraffin wax. / M.Sc.Eng. University of KwaZulu-Natal, Durban 2013.