This document aims on aplication of sophisticated software programs to accomplish hydraulic analysis of real water supply, design and optimization measures for improvement of pressure conditions in water network. In this work is stated a list and description of software enabling to accomplish static or longterm hydraulic analysis of water supply when the most world used program EPANET 2.0 is described more deeply. There is described working of a EPANET and his algorithm also there are explain principles on which EPANET is based. During the hydraulic analysis of real system was used sophisticated software EPANET 2.0. With this program was processed hydraulic analysis of chosen water supply system of small consumption area. Based on the results of analysis pressure conditions has been designed and optimized measure to improve pressure conditions in the water network.

Após o aumento de potência do reator IEA-R1 de 2 MW para 5 MW observou-se um aumento da taxa de corrosão nas placas laterais de alguns elementos combustíveis e algumas dúvidas surgiram com relação ao valor de vazão utilizada nas análises termo-hidráulicas. A fim de esclarecer e medir a distribuição de vazão real pelos elementos combustíveis que compõe o núcleo do reator IEA-R1, um elemento combustível protótipo, sem material nuclear, chamado DMPV-01 (Dispositivo para Medida de Pressão e Vazão), em escala real, foi projetado e construído em alumínio. A vazão no canal entre dois elementos combustíveis é muito difícil de estimar ou ser medida. Esta vazão é muito importante no processo de resfriamento das placas laterais. Este trabalho apresenta a concepção e construção de um elemento combustível instrumentado para medir a temperatura real nestas placas laterais para melhor avaliar as condições de resfriamento do combustível. Quatorze termopares foram instalados neste elemento combustível instrumentado. Quatro termopares em cada canal lateral e quatro no canal central, além de um termopar no bocal de entrada e outro no bocal de saída do elemento. Existem três termopares para medida de temperatura do revestimento e um para a temperatura do fluido em cada canal. Três séries de experimentos, para três configurações distintas, foram realizadas com o elemento combustível instrumentado. Em dois experimentos uma caixa de alumínio foi instalada ao redor do núcleo para reduzir o escoamento transverso entre os elementos combustíveis e medir o impacto na temperatura das placas externas. Dada a tamanha quantidade de informações obtidas e sua utilidade no projeto, melhoria e capacitação na construção, montagem e fabricação de elementos combustíveis instrumentados, este projeto constitui um importante marco no estudo de núcleos de reatores de pesquisa. As soluções propostas podem ser amplamente utilizadas para outros reatores de pesquisa. / After the IEA-R1 upgrade from 2 MW to 5 MW it was observed that the corrosion rate increased in a lateral plate of one fuel element and some issues appeared concerning the flow values used in the thermal-hydraulic analysis. In order to clear it up and measure the actual flow distribution among the fuel elements composing the IEA-R1 active core, a dummy element without nuclear fuel material, called DMPV-01 (Pressure and Flow Measurement Device), full scale, was designed and manufactured in aluminum. The flow rate in the channel between two fuel assemblies is very difficult to estimate or measure. This flow rate is very important to the cooling process of the external plates. This work presents the design and construction of an instrumented fuel assembly in order to measure the actual temperature in these lateral plates. Fourteen thermocouples were installed in this instrumented fuel assembly. Four in each lateral channel, one in the inlet nozzle and one in the outlet nozzle. There are three thermocouples in each channel to measure the clad temperature and one thermocouple to measure the fluid temperature. Three series of experiments, for three different core configuration were carried out with the instrumented fuel assembly. In two experiments a box was installed around the core to reduce the cross flow between the fuel assembly and measure the impact in the temperatures of external plates. Given the amount of information generated and its utility in the design, improvement and qualification in construction, assembly and manufacturing of instrumented fuel, this project turned out to be an important landmark on the thermal-hydraulic study of research reactor cores. The proposed solutions could be useful for other research reactors.

Após o aumento de potência do reator IEA-R1 de 2 MW para 5 MW observou-se um aumento da taxa de corrosão nas placas laterais de alguns elementos combustíveis e algumas dúvidas surgiram com relação ao valor de vazão utilizada nas análises termo-hidráulicas. A fim de esclarecer e medir a distribuição de vazão real pelos elementos combustíveis que compõe o núcleo do reator IEA-R1, um elemento combustível protótipo, sem material nuclear, chamado DMPV-01 (Dispositivo para Medida de Pressão e Vazão), em escala real, foi projetado e construído em alumínio. A vazão no canal entre dois elementos combustíveis é muito difícil de estimar ou ser medida. Esta vazão é muito importante no processo de resfriamento das placas laterais. Este trabalho apresenta a concepção e construção de um elemento combustível instrumentado para medir a temperatura real nestas placas laterais para melhor avaliar as condições de resfriamento do combustível. Quatorze termopares foram instalados neste elemento combustível instrumentado. Quatro termopares em cada canal lateral e quatro no canal central, além de um termopar no bocal de entrada e outro no bocal de saída do elemento. Existem três termopares para medida de temperatura do revestimento e um para a temperatura do fluido em cada canal. Três séries de experimentos, para três configurações distintas, foram realizadas com o elemento combustível instrumentado. Em dois experimentos uma caixa de alumínio foi instalada ao redor do núcleo para reduzir o escoamento transverso entre os elementos combustíveis e medir o impacto na temperatura das placas externas. Dada a tamanha quantidade de informações obtidas e sua utilidade no projeto, melhoria e capacitação na construção, montagem e fabricação de elementos combustíveis instrumentados, este projeto constitui um importante marco no estudo de núcleos de reatores de pesquisa. As soluções propostas podem ser amplamente utilizadas para outros reatores de pesquisa. / After the IEA-R1 upgrade from 2 MW to 5 MW it was observed that the corrosion rate increased in a lateral plate of one fuel element and some issues appeared concerning the flow values used in the thermal-hydraulic analysis. In order to clear it up and measure the actual flow distribution among the fuel elements composing the IEA-R1 active core, a dummy element without nuclear fuel material, called DMPV-01 (Pressure and Flow Measurement Device), full scale, was designed and manufactured in aluminum. The flow rate in the channel between two fuel assemblies is very difficult to estimate or measure. This flow rate is very important to the cooling process of the external plates. This work presents the design and construction of an instrumented fuel assembly in order to measure the actual temperature in these lateral plates. Fourteen thermocouples were installed in this instrumented fuel assembly. Four in each lateral channel, one in the inlet nozzle and one in the outlet nozzle. There are three thermocouples in each channel to measure the clad temperature and one thermocouple to measure the fluid temperature. Three series of experiments, for three different core configuration were carried out with the instrumented fuel assembly. In two experiments a box was installed around the core to reduce the cross flow between the fuel assembly and measure the impact in the temperatures of external plates. Given the amount of information generated and its utility in the design, improvement and qualification in construction, assembly and manufacturing of instrumented fuel, this project turned out to be an important landmark on the thermal-hydraulic study of research reactor cores. The proposed solutions could be useful for other research reactors.

The Multi-Application Small Light Water Reactor (MASLWR) is a small natural circulation pressurized light water reactor design that was developed by Oregon State University (OSU) and Idaho National Engineering and Environmental Laboratory (INEEL) under the Nuclear Energy Research Initiative (NERI) program to address the growing demand for energy and electricity. The MASLWR design is geared toward providing electricity to small communities in remote locations in developing countries where constructions of large nuclear power plants are not economical. The MASLWR reactor is designed to operate for five years without refueling and with fuel enrichment up to 8 %. In 2003, an experimental thermal hydraulic research facility also known as the OSU MASLWR Test Facility was constructed at Oregon State University to examined the performance of new reactor design and natural circulation reactor design concepts. This thesis is focused on the thermal hydraulics analysis and fuel performance analysis of the MASLWR prototypical cores with fuel enrichment of 4.25 % and 8 %. The goals of the thermal hydraulic analyses were to calculate the departure nucleate boiling ratio (DNBR) values, coolant temperature, cladding temperature and fuel temperature profiles in the hot channel of the reactor cores. The thermal hydraulic analysis was performed for steady state operation of the MASLWR prototypical cores. VIPRE Version 01 is the code used for all the computational modeling of the prototypical cores during thermal hydraulic analysis. The hot channel and hot rod results are compared with thermal design limits to determine the feasibility of the prototypical cores. The second level of analysis was performed with a fuel performance code FRAPCON for the limiting MASLWR fuel rods identified by the neutronic and thermal hydraulic analyses. The goals of the fuel performance analyses were to calculate the oxide thickness on the cladding and fission gas release (FGR). The oxide thickness results are compared with the acceptable design limits for standard fuel rods. The results in this research can be helpful for future core designs of small light water reactors with natural circulation. / Graduation date: 2012

The master thesis is focused on analysis of specific cross-flow in-line tube bundle heat exchanger which deals with significant operational problems. Thermal, hydraulic and vibration calculation analysis of selected parts of the heat exchanger is performed based on CFD flow distribution results. Calculation is performed by using Maple software. Thermal and hydraulic calculations are compared with results obtained by commercial software HTRI.

This thesis looks at water quality modelling in the water network, focusing on water age. The initial part of the work identifies the factors that lead to an increase in water age in water supply networks. The theoretical part of the work presents the mathematical relationships and logistical steps that software tools apply to simulate water quality indicators in a water supply network. In the practical part of the work, a hydraulic model of a water distribution system with a total length of 302,1 km was constructed. Measurement campaign was carried out to calibrate and verify created hydraulic model. Using this hydraulic model, water age for existing and possible scenarios was simulated. The results of the work have revealed parts of the water supply network containing high water age and are intended to encourage the progressive water distribution systems management philosophy.

The proposed work is dealing with control design of pump-tank system as part of broader water-supply network with using of mechatronic approach. The main goal of this work is design of control for regulation of flow, pressure and water level in tank in water-supply network of Vsetin city. This water-supply network consists of various components, such as pumps, pipes, valves, tanks etc. For the purpose of the control design is necessary to create a model of pipe network. The solution of hydraulic analysis is obtained by using the gradient method, which was implemented into the software solution named ADAM. The results of hydraulic analysis are compared with measured values of flow and pressure and difference of these values has to be minimalized by proposed calibration and verification process. The calibration and verification process was implemented in software ADAM. The essence of design control is formulating control problem as optimization problem. Therefore the output of higher control layer is set of procedural rules, which determines for example speed of pumps in time etc. Results were verified by using for this purpose developed computational server (ADAM Server).