Bc. Jaroslav Simcik Construction of hydraulic wood-splitting machine DP, Institute of production machines, systems and robotics, 2010, p. 60, fig. 30, appendices 7, This master ´s thesis is concerned with the wood-processing technology with a focus on the construction of hydraulic wood splitter machine with a force 120 kN.

This master’s thesis deals with the design of the new concept of lifting turntable QHZ 20. The main objective is to reduce the installation depth of table. Part of thesis is background research of individual components of the forging complex with hydraulic press CKW 25. It describes the current structure QHZ table, comparing the advantages and disadvantages of possible solutions of the table. The work also includes design, description and calculation of the chosen solution.

Purpose of this thesis is to make constructional modification of single-purpose pressing machine for Huisman Konstrukce, s.r.o. company. Present machine is non-operational and not enough powerful for present requests of workshop. Intended modifications are to describe present condition of machine, find present requirements and design simple modifications. All modifications are checked by calculations and sketched in shop drawings. There were also made alternative options of modification to show machine more versatile and automatic.

This thesis describes a project of a mobile stage device that will be used for a concert tour of Lucie. The first part characterizes the given task and expounds description and function of the device itself. The second part focuses on the design concept of supporting frames. This is followed by design and calculation of all mechanisms, actuators and construction of individual moving parts of a sliding and lifting platform. The last part verifies stability of the whole construction in accordance with appropriate standards. The thesis also contains technical documentation, which is to be found in appendix.

This diploma thesis deals with the design of the hydraulic puller. Furthermore, the diploma thesis presents the analysis of possible design solutions. It includes processing the selected design of the hydraulic puller with parameters: maximum pushing force 50 kN, speed of work movement 0,05 m.s-1. The analysis by using finite element method (FEM) is made. The next part of thesis includes the design of hydraulic circuit of puller. In the last part of thesis there is the design for replacement of hydraulic puller by mechanical systems.

The article presents the results of experimental tests of the liquid exchange level in a new design of a hydraulic cylinder in comparison with the classic one. Comparative results are presented, as well as the influence of the stroke range on the degree of liquid exchange. The results allow the empirical determination of the degree of real improvement of the process of liquid exchange in the cylinder during operation, and thus allow the initial determination of the reliability level increase in hydraulic cylinders. It should be emphasized that the presented results are a part of a research and implementation project carried out in cooperation between a university and an industrial partner. In addition, the presented test method of hydraulic cylinders is, in the opinion of the authors, an interesting proposition, which can be used by manufacturers of this type of components in the world.

For the transport of their spacecraft from the vehicle assembly building to the launch pads at Kennedy Space Centre, Florida, the National Aeronautics and Space Administration (NASA) is using two special crawler transporters since 1965. First developed for the Saturn V rocket the crawler transporters have been sufficient for all following generations of space ships so far. But for the new generation of Orionspacecraft which is under development now, a load capacity increase for the crawler transporter of plus 50% was necessary. For this task Hunger Hydraulik did develop new jacking, equalizing and levelling (JEL) cylinders with sufficient load capacity but also with some new features to improve the availability, reliability and safety of this system. After design approval and manufacture of the cylinders they have been tested in a special developed one-to-one scale dynamic test rig and after passing this the cylinders had to prove their performance in the crawler transporter itself. This article describes the general application and introduces the technical requirements of this project as well as the realized solution.

This Diploma thesis occupies with design of hydraulic puller. In work are mentioned possible types of construction. Choice construction of puller is disposed with parameters: maximum pushing force 50 kN, speed of piston rod 0,05 m/s. This work also contains FEM analysis by computer programme I-DEAS. The work also occupies with design of fluid drive.

This diploma thesis deals with the mechanical proposal of hydraulic puller. Furthermore, it includes the detail design solutions. The project also includes the calculation of the hydraulic puller parameters: maximum pushing force is 60 kN, speed of movement is 0.1 m s-1. This work also contains of stress analysis FEM with I-DEAS software. Following part deals with the design of hydraulic circuit for driving puller. At the end of work there are options for replacements of hydraulic puller by mechanical systems.

This thesis is divided into several chapters. First two chapters after introduction are written as search type. In next part I devoted to detailed design of functional mechanisms of linearly moving parts of press brake. For the construction of stop mechanism I dealt with conversion types as ball screw, pinion with rack and timing belts. There is also quite thorough calculation part in ball screw and pinion with rack issue. I have also dealt with the necessary bending force and then designed hydraulic cylinders. Elaboration of machine frame with safety features is included.