The synthesis of 2,4,6,8-Tetramethylcyclotetrasiloxane (D4H), and Poly(methylhydrosiloxane) (PMHS) average molecular weight 1700-3200 g/mol, were functionalized with different repeat units of methoxy polyethylene glycol (PEG) (n = 8,12,17). These compounds act as polymer electrolytes with a backbone of siloxane and they were prepared via hydro-silylation reaction to be functionalized with different molecular weights of Ally-PEG. The compounds were confirmed by FT-IR, 1H-NMR and 13C NMR spectroscopy. A hydro-silylation reaction between the functionalized AllyPEG of different molecular weights produced four compounds with a low glass transition temperature that could improve comb like polymer electrolytes conductivity by reducing crystalline phase of PEO. Another way to increase the percentage of the amorphous phase of PEO is to blend it with other polymers. The blending method is considered to be an important method to improve the ionic conductivities and dimensional stability of polymer electrolytes. The main advantages of the blend systems are the simplicity of preparation and the ease to control the physical properties. A high molecular weight of poly 2- vinyl pyridine (Mw=200,000) was added to improve the dimensional stability. Differential scanning calorimetry (DSC) thermal analysis shows that all the blend systems will exhibit an increase in the glass transition temperature by increasing the salt content. The other novel synthesis of polymer electrolytes are triglyme borane and borosilicate. They were synthesized via hydro-boration. These compounds were characterized and confirmed by FT-IR, 1H-NMR 13C NMR spectroscopy. The ionic conductivity of both systems, pure and blend, of different compositions were determined at four temperatures i.e. 25°C, 40°C, 55°C and 70°C. A maximum ionic conductivity value of the siloxane blend is 9.1x10-4 S cm-1 and the pure triglyme borane is 2.14x10-3 S cm-1 at ambient temperature. The ratios of ethylene oxide to lithium salt of siloxane blend and pure triglyme borane were 10:1 and 35:1 respectively. These ratios were the highest conductivity obtained in all the electrolyte systems. The ionic conductivity increases with increasing temperature and salt content to reach optimum concentration. This behavior results in ionic transport, which is supported by the segmental motion of the polymer matrix host.