Spelling suggestions: "subject:"hydrogenation : catalysis"" "subject:"hydrogenation : atalysis""
1 |
Mechanistic studies on transition metal complex catalysed homogeneous hydrogenationSharma, Uma Devi January 1996 (has links)
The development of systems capable of catalysing the reduction of unsaturated bonds with very high selectivities is one of the greatest successes of asymmetric catalysis. The mechanism by which rhodium complexes catalyse alkene hydrogenation has been effectively established through a combination of kinetic studies and isolation and characterisation of the intermediates in solution. It was hoped to elucidate the corresponding ruthenium catalysed mechanism using similar techniques. Following the synthesis of a selection of ruthenium catalysts, their activity towards the reduction of a selection of dehydroamino acid derivatives at ambient temperature and pressure was investigated. Having successfully tested out the activity of these catalysts, NMR studies were initiated in order to observe and characterise intermediates in the catalytic cycle. Considerable effort was put into the NMR studies, the systems were looked at under both argon and hydrogen, but although some substrate containing species were observed, it was found to be effectively impossible to break into the catalytic cycle and observe intermediate species using NMR techniques. Electrospray mass spectrometry investigations yielded more successful results, though still no hydrogen containing intermediates were observed. However, it was possible to make a detailed kinetic study of several ruthenium catalyst / substrate systems by looking at the dependence of reaction rate on classic variables such as hydrogen pressure, catalyst concentration and substrate concentration. The combined results of electrospray experiments, kinetic analyses and kinetic modelling using computer packages enabled a possible mechanistic pathway to be proposed.
|
2 |
The kinetics of the platinum-catalyzed vapor-phase hydrogenation of benzeneQuady, David Edward, January 1968 (has links)
Thesis (Ph. D.)--University of Wisconsin--Madison, 1968. / Typescript. Vita. eContent provider-neutral record in process. Description based on print version record. Includes bibliographical references (leaves 181-199).
|
3 |
Pd/C-catalyzed Suzuki cross- and self- couplings & the development of a lab-scale hydrogenation systemChen, Jeng-Shiou. January 2008 (has links)
Thesis (Ph. D.)--Rutgers University, 2008. / "Graduate Program in Chemical and Biochemical Engineering." Includes bibliographical references (p. 116-122).
|
4 |
Enantioselective hydrogenation using ruthenium complexes of tridentate ligandsPhillips, Scott D. January 2011 (has links)
This thesis describes the development of the [RuCl₂(P N N)L] catalytic system for asymmetric hydrogenation. It has been demonstrated that the current system is efficient in preparing a range of bulky chiral alcohols in good enantioselectivity, many of which are likely to be inaccessible using the more classic [RuCl₂(P P)N N)] system developed by Noyori and coworkers. It has been shown that the current system is tolerant of a range of substrate electronic effects as well as the presence of heteroaromatic functionality, thus showing its applicability in synthesis. This has been extended to prepare a number of bulky derivatives of synthetically important molecules. The demonstration of this is significant as in drug design, for example, studies that aim to extend lipophilicity or steric bulk make the ability to prepare alcohols across the full range of steric properties important. We have shown that chiral alcohols with adjacent gem-dimethyl groups can be prepared in high enantioselectivity and their conversion into other valuable molecules, such as chiral lactones has been demonstrated. Detailed mechanistic studies have been undertaken for the present system in order to aid rational design of new, more active and selective catalysts. A number of achiral variants of the original system have been prepared and the key features of ligand structure for efficient catalysis have been identified. This was accomplished by rigorous kinetic analysis of each complex, using specialist gas-uptake monitoring equipment. The key features of catalyst structure and optimal reaction conditions for efficient asymmetric hydrogenation have been identified. Our greater understanding of the present system allowed us to rationally design new catalysts of for enantioselective hydrogenation. Our aim was to be able to tune the catalyst structure to carry out hydrogenation of a greater variety of ketone substrate with high activity and selectivity. We have successfully prepared second generation catalysts that show enhanced enantioselectivity for a variety of substrates, many of which were problematic with the Noyori system.
|
5 |
Synthesis of Metal and Metal Oxide Nanosponges for Hydrogen Storage and Catalytic ApplicationsGhosh, Sourav January 2016 (has links) (PDF)
Nanoporous metal represents a particular form of a metal, which combines the characteristics of metals, such as good thermal and electrical conductivity, catalytic activity with the materials properties characteristic of nanoporosity, which include high surface area, low density, large number of pores, etc. Nanoporous metals have applications in various fields such as catalysis, hydrogen storage, electrochemical sensing, membranes, SERS, and supercapacitors. The three dimensional porous structures offer high specific surface area and large pore volumes, which enhance substrate diffusion within the porous structures and provide a large number of surface active sites for catalytic applications. However, synthesis of nanoporous metal based on conventional approach (template assisted synthesis and dealloying) suffers from scalability issue, specific for few metals, additional synthetic steps etc. Challenges still remain in this field to fabricate three dimensional porous metals where pores are interconnected (bicontinuous). Recently, development of the synthesis of nanoporous metal got a thrust by the advent of the concept of assembly of nanoparticles in either an ex-situ or in an in-situ manner.
Objectives
1. Establish the synthetic strategy of metal nanosponge formation by capping agent dissolution method (ex-situ assembly)
2. Explore the catalytic activity of these metal nanosponges towards 4-nitrophenol reduction and alkene hydrogenation reactions
3. Elucidate the mechanism of formation of metal nanosponge in solution state (kinetic in-situ assembly of nanoparticles) using ammonia borane as a reducing agent in water under different conditions
4. Investigate the hydrogen storage properties and catalytic arene hydrogenation activities of metal nanosponges
5. Synthesis of bismuth oxide nanosponge using bismuth nanosponge as a template. Study of the photocatalytic dye degradation behavior using bismuth oxide nanosponge under visible light irradiation
Significant results
Synthesis of metal nanosponges was carried out using capping agent dissolution method wherein addition of water to M@BNHx polymer gives metal nanosponges. The B-H bond of BNHx polymer is unstable in the presence of water and gets hydrolyzed to give hydrogen gas bubbles which act as dynamic templates for the formation of metal nanosponges. The pristine nature of the surface of these metal nanosponges was elucidated by several analytical techniques. The catalytic activity of these metal nanosponges (Ag, Au, Pd, Pt, and Cu) was demonstrated using 4-nitrophenol reduction reaction in the presence of sodium borohydride as a reducing agent.
Iridium nanosponge was obtained by capping agent dissolution method from Ir@BNHx polymer. Mesoporous high surface area iridium nanosponge was found to be an active catalyst for alkene hydrogenation reaction, whereas Ir@BNHx polymer does not exhibit any catalytic activity under similar reaction conditions. The effects of temperature, solvent, substrate to catalyst ratio, and pressure on catalyst activity were established using styrene as a substrate. The thermal stability (up to 300 oC) and robustness over several cycles were demonstrated for the iridium nanosponge. Several alkenes (linear alkene, cycloalkane, and conjugated alkene) were successfully hydrogenated using iridium nanosponge at room temperature and 4 bar hydrogen pressure. Generality of the synthetic procedure was explored by using different iridium precursors which gave iridium nanosponges exhibiting similar catalytic activity.
Silver, gold, palladium, platinum, and copper nanosponges have been synthesized by chemical reduction method (in-situ kinetic assembly of nanoparticles) using ammonia borane as a reducing agent in water as a solvent. The effect of variables (metal salt to amine borane ratio, concentration of the reactants, solvent, temperature, and reducing agent) were thoroughly investigated using the silver system as a model. In the absence of a capping agent, metal salt reduction was carried out using amine borane which forms nanoparticles. In a high dielectric solvent, the colloidal particles attach together to form agglomerates. During the course of the reaction, hydrogen gas bubbles were generated which produce pores within the agglomerates leading to the formation of three dimensional nanosponge structures. Finally, the hydrogen storage properties (pressure composition isotherm and sorption kinetics) of these metal nanosponges were investigated under different conditions. These metal nanosponges exhibit reasonable, reversible storage characteristics: Ag (3 wt%), Pd (5.5 wt%), Pt (6 wt%), and Cu (2.5 wt%).
Phase selective ruthenium nanosponge was synthesized using chemical reduction method. It was found that amine borane as a reducing agent for certain ruthenium precursors results in the hcp phase of ruthenium whereas, reduction using sodium borohydride affords fcc phase of ruthenium. Hcp and fcc phases of ruthenium were established using electron and X-ray diffraction methods. Surface characterization technique showed the pristine nature of ruthenium nanosponge. Both hcp and fcc ruthenium nanosponges were employed as catalysts for hydrogenation of benzene; it was found that hcp ruthenium is more active than fcc ruthenium for benzene hydrogenation to cyclohexane. Substrate to catalyst ratio, temperature, hydrogen pressure, and solvent effect were thoroughly investigated using benzene as a model substrate. It was found that hcp ruthenium nanosponge is capable of hydrogenating a variety of alkyl substituted benzenes under ambient conditions. The catalyst was found to be active over several cycles without any loss in its activity. Phosphine was used as a catalyst poison and hot filtration test was performed separately to show the true heterogeneous nature of the active catalyst. Hydrogen storage experiments were performed to understand the interaction of hydrogen with different phases of ruthenium.
Bismuth nanosponge was synthesized using chemical reduction method. Synthesis of different polymorphs of bismuth oxide nanosponges (tetragonal, monoclinic and body centered cubic) were carried out by calcination of bismuth nanosponge at different temperature (300 oC, 500 oC, and 800 oC). The phase purity of bismuth oxide nanosponges were established using X-ray and electron diffraction method. It was found that surface area decreases with increasing the calcination temperature. Tetragonal bismuth oxide (300 oC annealed sample) nanosponge shows the highest photocatalytic activity as compared to other polymorphs. Mechanistic investigation suggests that hole and hydroxyl radical are responsible for dye degradation. Recyclability study demonstrated the formation of bismuth oxycarbonate which leads to a drop in catalytic activity. However, the tetragonal phase of bismuth oxide with high catalytic activity could be regenerated upon annealing at 300 oC for 3 h.
|
Page generated in 0.0771 seconds