L'objectif de notre étude est de mettre en évidence les synergies existantes entre les différents facteurs de vieillissement lors de la dégradation d’un revêtement polymère modèle, représentatif d’une peinture anticorrosion.Notre travail a consisté à suivre le vieillissement hygrothermique du système DGEBA/TETA sous forme de film libre et de revêtement déposé sur substrat acier dans différentes solutions (eau pure et NaCl 3%) pour différentes températures et contraintes mécaniques visco-élastique appliquées. Nos résultats ont montré que le programme de cuisson affectait les propriétés physico-chimiques et mécaniques du système initial et que l’absorption d’eau, non homogène, suivait une loi non-Fickienne, suite à un phénomène de gonflement.La prise en eau et la diffusion ont été caractérisées par gravimétrie et spectroscopie d’impédance électrochimique. Nos résultats montrent que les propriétés barrière du revêtement diminuent avec la quantité d’eau absorbée et avec la température de vieillissement. Cependant, la contrainte plane appliquée sur le système tend à contrarier cet effet. La formalisation de nos observations expérimentales dans le cadre d’une approche thermodynamique a montré l’effet prépondérant de la partie entropique par rapport à la partie enthalpique de l’énergie d’activation des processus de transport de l’eau, en raison de l’orientation des chaînes sous l’action de la contrainte. De plus, une diminution de la permittivité relative du revêtement sec a été observée en fonction de la température et de la contrainte appliquée, indépendamment de son signe (tension ou compression). Dans ce cas, la contribution enthalpique semble être prépondérante. / The objective of this study is to highlight synergies existing between different ageing factors during the degradation of a polymer model coating system, representing an anti-corrosion coating.We first monitored the hygrothermal ageing of DGEBA/TETA system as free films and as attached films onto a steel substrate in different solutions (water and NaCl 3wt% solution) for different temperatures and applied mechanical visco-elastic stresses. Our results showed that the curing programs affected the physic-chemical and mechanical properties of the cured systems and that the non-homogeneous water uptake process followed a non-Fickian law, due to a swelling phenomenon.The water uptake and diffusion were characterized by gravimetry and electrochemical impedance spectroscopy. The results indicate that the barrier properties of the coating decrease with the quantity of absorbed water in system and with the increasing of the ageing temperature. However, the planar stress applied onto the system tends to counteract this effect. The formalization of our experimental observations within a thermodynamic approach showed the predominant effect of the entropic part in comparison with enthalpic part of the activation energy of the water uptake process, due to the reorientation of polymer chains under the applied stress. In addition, a decrease in the relative permittivity of the initial dry coating was observed as a function of the temperature and the applied stress, regardless of its sign (tension and compression). In this case, the enthalpic contribution seems to be predominant.

Ce travail de thèse porte sur l’étude et la mise en évidence de relations microstructure-propriétés dans des revêtements modèles à base époxy représentatifs de peinture anticorrosion. Ces relations sont établies aussi bien à l’état initial que lors de vieillissements hygrothermiques. Cette étude a tout d’abord consisté à caractériser les propriétés physico-chimiques et mécaniques du système stœchiométrique DGEBA/DAMP totalement réticulé. Ces propriétés ont été comparées à celles du système DGEBA/TETA et ont permis de montrer la forte influence de la microstructure sur ces propriétés initiales. Des vieillissements hygrothermiques cycliques à différentes températures sur films libres ont été effectués pour mesurer l’impact de la microstructure sur la durabilité des systèmes époxy. Ces travaux ont pu montrer l’influence des interactions eau-polymère dans les phénomènes de diffusion. De plus, les évolutions de certaines propriétés physico-chimiques et mécaniques ont pu être caractérisées à l’aide de la DMA (mors submersibles), lors des différentes étapes de sorption-désorption. Un comportement pseudo-fickien a pu être mis en évidence lors de la première sorption, suivi d’un comportement fickien lors des autres étapes. Les causes inhérentes à cette évolution ont pu être avancées, en mettant en jeu des réorganisations microstructurales des systèmes époxy étudiés. D’autres vieillissements hygrothermiques ont été réalisés à l’aide de la SIE sur des revêtements pour étudier l’effet de l’interface revêtement/substrat acier sur les phénomènes de diffusion, notamment le rôle des contraintes résiduelles. L’influence de la contrainte visco-élastique sur les phénomènes de prise en eau des revêtements a finalement été étudiée. / This work highlights the microstructure-properties relations inside representative epoxy based model coatings for anticorrosion paints. These relations have been established for the initial state as well as the hygrothermal ageing. First, we characterised physico-chemical and mechanical properties of the totally crosslinked DGEBA/DAMP stoichiometric system. These properties have been compared to the DGEBA/TETA system and they showed the strong influence of the microstructure on these initial properties. Cyclic hygrothermal ageing have been completed at different temperatures on free films, in order to measure the impact of the microstructure on the durability of epoxy systems. This work has shown the influence of the water-polymer interactions on diffusion phenomena. Moreover, the evolutions of several physico-chemical and mechanical properties have been characterised using DMA (submersible clamps), during different sorption-desorption steps. A pseudo-fickian behaviour has been evidenced during the first sorption, and it was followed by a fickian behaviour for all other steps. The inherent causes of this evolution have been proposed, by considering microstructural reorganisations of the studied epoxy systems. Other hygrothermal ageing have been carried out using EIS on coatings, in order to study the effects of the coating/steel substrate interface on diffusion phenomena, especially the role of residual stresses. We finally studied the influence of the visco-elastic stress on the coating water intake phenomena.

Ce travail a pour but d'étudier la tolérance à l'impact de 3 stratifiés carbone/époxy soumis simultanément à différents types de chargements hygrothermiques et mécaniques. Ces stratifications présentant des caractéristiques mécaniques globales particulières d'isotropie, il s'agit ici de déterminer l'influence de la séquence d'empilement sur le développement de l'endommagement lors d'un impact. Dans un premier temps, la cinétique de vieillissement hygrothermique des trois stratifications est étudiée et analysée. Ensuite, leur tolérance à un unique impact ainsi qu'à des impacts répétés est évaluée. L'endommagement résultant de ces impacts est analysé par contrôle ultrasonore. La morphologie générale et l'amplitude de l'endommagement dans la profondeur des matériaux sont mises en relation avec les propriétés mécaniques et la séquence d'empilement spécifique à chaque stratifié. Dans un deuxième temps, l'influence combinée de plusieurs sollicitations est étudiée. Différents scénarii associant un vieillissement hygrothermique ainsi qu'un ou deux impacts sont mis en oeuvre. L'endommagement résultant est mis en rapport avec les temps relatifs de vieillissement et la position des impact durant le cycle de vieillissement. Ensuite, l'influence d'une précharge de traction sur la tolérance à l'impact est mise en évidence. Un montage spécifique a été conçu et fabriqué pour réaliser ces tests. Enfin, l'association d'un vieilllissement hygrothermique et d'une précharge de traction est abordée afin d'identifier la sollicitation la plus pénalisant en terme de tolérance et d'impact / This study examines impact damage processes in three types of CFRP composite materials simultaneously subjected to different hygrothermal and mechanical loading conditions. The composite structures tested are chosen for having particular global isotropic responses when loaded, the aim being to ascertain the exact influence of lay-up sequence on impact damage propagation. The work is presented in four main sections. Firstly by establishing hygrothermal ageing dynamics for the three composite structure types and their behaviour when impacted once or several times ; impact damage is measured and analysed using ultrasonic method. The extent and general morphology of the damage through the material thickness is correlated with mechanical properties and lay-up sequence specific to each material. Secondly the influence of simultaneous load combinations is examined. These include different durations of hygrothermal ageing associated with single or double impacts.The resulting damage incurred is analysed with respect to overall ageing time and time during the ageing cycle when the impact was applied. Thirdly the effect of tensile loading during impact on damage within the material was studied. This was achieved using a specially designed test apparatus that allows loading and impacting conditions to be independently modified. By associating a high-speed digital camera to film specimen impacts it is possible to evaluate a relationship between overall composite specimen stiffness and the impact damage. Finally, in order to identify the most unfavourable situation with regard to impact damage resistance an association between hygrothermal ageing and an applied tensile load is examined

In recent years, due to growing environmental awareness, considerable attention has been given to the development and production of natural fibre reinforced polymer (both thermoset and thermoplastic) composites. The main objective of this study was to reinforce epoxy and polylactic acid (PLA) with hemp fibre to produce improved composites by optimising the fibre treatment methods, composite processing methods, and fibre/matrix interfacial bonding. An investigation was conducted to obtain a suitable fibre alkali treatment method to: (i) remove non-cellulosic fibre components such as lignin (sensitive to ultra violet (UV) radiation) and hemicelluloses (sensitive to moisture) to improve long term composites stability (ii) roughen fibre surface to obtain mechanical interlocking with matrices (iii)expose cellulose hydroxyl groups to obtain hydrogen and covalent bonding with matrices (iv) separate the fibres from their fibre bundles to make the fibre surface available for bonding with matrices (v) retain tensile strength by keeping fibre damage to a minimum level and (vi) increase crystalline cellulose by better packing of cellulose chains to enhance the thermal stability of the fibres. An empirical model was developed for fibre tensile strength (TS) obtained with different treatment conditions (different sodium hydroxide (NaOH) and sodium sulphite (Na2SO3) concentrations, treatment temperatures, and digestion times) by a partial factorial design. Upon analysis of the alkali fibre treatments by single fibre tensile testing (SFTT), scanning electron microscopy (SEM), zeta potential measurements, differential thermal analysis/thermogravimetric analysis (DTA/TGA), wide angle X-ray diffraction (WAXRD), lignin analysis and Fourier transform infrared (FTIR) spectroscopy, a treatment consisting of 5 wt% NaOH and 2 wt% Na2SO3 concentrations, with a treatment temperature of 120oC and a digestion time of 60 minutes, was found to give the best combination of the required properties. This alkali treatment produced fibres with an average TS and Young's modulus (YM) of 463 MPa and 33 GPa respectively. The fibres obtained with the optimised alkali treatment were further treated with acetic anhydride and phenyltrimethoxy silane. However, acetylated and silane treated fibres were not found to give overall performance improvement. Cure kinetics of the neat epoxy (NE) and 40 wt% untreated fibre/epoxy (UTFE) composites were studied and it was found that the addition of fibres into epoxy resin increased the reaction rate and decreased the curing time. An increase in the nucleophilic activity of the amine groups in the presence of fibres is believed to have increased the reaction rate of the fibre/epoxy resin system and hence reduced the activation energies compared to NE. The highest interfacial shear strength (IFSS) value for alkali treated fibre/epoxy (ATFE) samples was 5.2 MPa which was larger than the highest value of 2.7 MPa for UTFE samples supporting that there was a stronger interface between alkali treated fibre and epoxy resin. The best fibre/epoxy bonding was found for an epoxy to curing agent ratio of 1:1 (E1C1) followed by epoxy to curing agent ratios of 1:1.2 (E1C1.2), 1: 0.8 (E1C0.8), and finally for 1:0.6 (E1C0.6). Long and short fibre reinforced epoxy composites were produced with various processing conditions using vacuum bag and compression moulding. A 65 wt% untreated long fibre/epoxy (UTLFE) composite produced by compression moulding at 70oC with a TS of 165 MPa, YM of 17 GPa, flexural strength of 180 MPa, flexural modulus of 10.1 GPa, impact energy (IE) of 14.5 kJ/m2, and fracture toughness (KIc) of 5 MPa.m1/2 was found to be the best in contrast to the trend of increased IFSS for ATFE samples. This is considered to be due to stress concentration as a result of increased fibre/fibre contact with the increased fibre content in the ATFE composites compared to the UTFE composites. Hygrothermal ageing of 65 wt% untreated and alkali treated long and short fibre/epoxy composites (produced by curing at 70oC) showed that long fibre/epoxy composites were more resistant than short fibre/epoxy composites and ATFE composites were more resistant than UTFE composites towards hygrothermal ageing environments as revealed from diffusion coefficients and tensile, flexural, impact, fracture toughness, SEM, TGA, and WAXRD test results. Accelerated ageing of 65 wt% UTLFE and alkali treated long fibre/epoxy (ATLFE) composites (produced by curing at 70oC) showed that ATLFE composites were more resistant than UTLFE composites towards hygrothermal ageing environments as revealed from tensile, flexural, impact, KIc, SEM, TGA, WAXRD, FTIR test results. IFSS obtained with untreated fibre/PLA (UFPLA) and alkali treated fibre/PLA (ATPLA) samples showed that ATPLA samples had greater IFSS than that of UFPLA samples. The increase in the formation of hydrogen bonding and mechanical interlocking of the alkali treated fibres with PLA could be responsible for the increased IFSS for ATPLA system compared to UFPLA system. Long and short fibre reinforced PLA composites were also produced with various processing conditions using compression moulding. A 32 wt% alkali treated long fibre PLA composite produced by film stacking with a TS of 83 MPa, YM of 11 GPa, flexural strength of 143 MPa, flexural modulus of 6.5 GPa, IE of 9 kJ/m2, and KIc of 3 MPa.m1/2 was found to be the best. This could be due to the better bonding of the alkali treated fibres with PLA. The mechanical properties of this composite have been found to be the best compared to the available literature. Hygrothermal and accelerated ageing of 32 wt% untreated and alkali treated long fibre/PLA composites ATPLA composites were more resistant than UFPLA composites towards hygrothermal and accelerated ageing environments as revealed from diffusion coefficients and tensile, flexural, impact, KIc, SEM, differential scanning calorimetry (DSC), WAXRD, and FTIR results. Increased potential hydrogen bond formation and mechanical interlocking of the alkali treated fibres with PLA could be responsible for the increased resistance of the ATPLA composites. Based on the present study, it can be said that the performance of natural fibre composites largely depend on fibre properties (e.g. length and orientation), matrix properties (e.g. cure kinetics and crystallinity), fibre treatment and processing methods, and composite processing methods.