1 |
Ionic liquids in bio-refining : synthesis and applicationsGräsvik, John January 2013 (has links)
Fossil fuel resources are not limitless so alternative renewable recourses are needed to fill the void that inevitably will be created once the supplies of this resource start do dwindle. Biomass has the potential to fill this void. Today only a small part of the world annual production of biomass is utilized by humankind, while the rest is allowed to decay naturally. To utilize this renewable resource in the production of fuel and chemicals, the so called bio-refineries specialized in fractionation and making use of all component of the biomass are needed. Ionic liquids could aid in this task. Ionic liquids (ILs) have shown great potential in the field of biomass processing in general and in the pretreatment of (ligno)-cellulose in particular. However, a few things need to be addressed before any large-scale processing can be considered: Finding new routes for IL synthesis that make "on-site" production possible; Investigation into the challenges facing IL pretreatment of (ligno)-cellulose such as possible depolymerization of cellulosic material during the pretreatment and investigating what influence different ILs have on the pretreatment of cellulosic material by methods like enzymatic hydrolysis. This work aims to address these issues and will present a route for IL synthesis making use of alcohols and carboxylic acids both commonly found in a biorefinery. Some of these ILs have also been tested for their ability of dissolve cellulose. Furthermore, this work will address the possibilities but also challenges upon IL-mediated (ligno)-cellulose processing. This includes investigating several ILs and their efficiency as a pretreatment solvent for enzymatic hydrolysis; these studies involve a large variety of different cellulosic materials. This work demonstrated that depolymerization during the IL pretreatment is a possibility and that this can complicate the recovery processes. Furthermore, this work gives guidance into what type of ILs might be suited as pretreatment solvents for different cellulosic materials, including amorphous and crystalline cellulose, processed and native lignocellulose, different types of wood samples and hemicellulose.
|
2 |
Application of ionic liquids and microwave activation in selected organic reactionsAsikkala, J. (Janne) 04 February 2008 (has links)
Abstract
Ionic liquids and microwave heating have been studied in four different reactions namely esterifications, etherifications and ene and sulfonylation reactions. These techniques revealed several advantages over conventional methods.
In esterification of alcohols with anhydrides in ionic liquid solvents, the low boiling acid by-product could be removed before product recovery. The acid by-product could be regenerated back to the anhydride. Similar or higher yields were observed from esterifications with acetic anhydride of carbohydrates than with conventional methods. Even cellulose and starch could be esterificated in ionic liquids in the homogenous phase.
The etherification reaction in ionic liquid was challenging, due to the basic reaction conditions needed. 1-Methyl-3-butylimidazolium -cations ([BMIM]) could not be used in basic conditions. The new information was that [BMIM]-cation could not be used with epichlorohydrin.
The ene reaction was carried out with microwave heating in various solvents. Ionic liquids could be used as a solvent, but the ene reaction between allyl benzene. The best results were obtained without additional solvent. The yields by using microwave heating were high and reaction times were relatively short.
The sulfonylation reaction of aromatics could be catalyzed by metal bistriflimide complexes. Even chlorobenzene could be sulfonylated when Bi-complex was used as a catalyst. Ionic liquids could be used as a solvent, but sulfonylations were best carried out without additional solvents.
|
3 |
High Electromagnetic Shielding of Multiwall Carbon Nanotube Composites Using Ionic Liquid DispersantLin, Jhe-Wei 15 July 2008 (has links)
In this study, a novel polyimide (PI) film, consisting of multiwall carbon nanotubes (MWCNTs) dispersed in an Ionic Liquid (IL), were demonstrated to be high shielding effectiveness (SE). The film was potentially useful for screening electromagnetic interference(EMI) in an optical transceiver module. The experimental results showed MWCNT-PI composite dispersed well in IL exhibits a high far-field SE of 38 ~ 45 dB within the frequency range of 1 ~ 3 GHz. It was also demonstrated the MWCNT-PI composite prepared with IL dispersed process have higher SE and lower weight percentage of MWCNTs than those with non-IL-dispersed process. Their intermolecular forces were carefully examined in order to understand dispersion mechanisms among MWCNTs. The aggregation phenomenon of MWCNTs was known, resulting from van der Waals forces. In our study, IL was employed to disperse MWCNTs. A proposal reason was that the attractive force between cation of the IL and £k electrons of MWCNTs is greater than the van der Waals forces among MWCNTs. From conductivity measurement, percolation threshold of the IL-dispersed MWCNT-PI composite was 5.2 wt%; percolation threshold of the non-IL-dispersed MWCNT-PI composite was 11.5 wt%. Given the lower percolation threshold ,we demonstrated the successful dispersion of MWCNT by adding IL. From the results of Raman spectrometer analyses, the IL dispersion was proved to be a physical interaction.
Furthermore, the IL-dispersed MWCNT-PI composite was used as package material in monopole antenna and got a near-field SE of 37dB within the frequency of 2.8 GHz. It implied that the IL-dispersed MWCNT-PI composite has an excellent EMI performance.The IL-dispersed MWCNT-PI composite is suitable for packaging low-cost and high-performance optical transceiver modules in the application of the fiber-to-the-home (FTTH) lightwave transmission systems.
|
4 |
Depolymerization of lignin for biomass processing in ionic liquidsCox, Blair Jeffrey 30 January 2013 (has links)
There is growing need for technologies to displace traditional petroleum resources. Towards this goal, lignocellulosic biomass is seen as a potential renewable resource for the production of fuels and commodity chemicals. One of the most difficult components of lignocellulose to process is lignin, which is a complex, amorphous aromatic polymer that acts as one of the structural components in plants. Ionic liquids are a class of compounds that are composed completely of anions and cations that, in some cases, can completely dissolve lignocellulosic biomass. The research performed for this dissertation aims to advance the technologies of lignocellulose processing through effective depolymerization of lignin in ionic liquids. Lignin fragments from this depolymerization could be used as a feedstock for further processing into aromatic commodity chemicals or polymers. Additionally, by removing lignin, biomass becomes much more accessible to enzymatic or chemical saccharification as a step towards fermentation into ethanol or other fuels.
Both base and acid catalyzed methods were explored, although the base promoted depolymerization of lignin in ionic liquids did not show much promise, as the reaction was never shown to be catalytic. Acidic routes towards lignin depolymerization were more successful. Using the acidic ionic liquid 1-H-3-methylimiazolium chloride, the ether linkages in lignin model compounds could be hydrolyzed with high yields. This technology was also applicable to the whole lignin macromolecule. The mechanisms of this reaction, as well as the effects on lignin were explored with various neutral and acidic ionic liquids, using HPLC, GPC, NMR, FT-IR, and mass spectrometry for analysis of samples. To demonstrate the applications of this technique, pine wood was treated with the acidic ionic liquids to open the structure of the wood to enzymatic saccharification through the removal of lignin and hemicellulose. / text
|
5 |
Processing of All Cellulose Composites via an Ionic Liquid RouteHuber, Tim January 2012 (has links)
Newly developed all-cellulose composites (ACCs) can overcome the chemical incoherence between cellulose and other polymers by dissolution and regeneration of a portion of cellulose to create a chemically identical matrix phase. New “close to industry”-processing ways for ACCs were developed to create “thick” ACCs (>1 mm thickness) based on composite processes already used in the composite industry.
The ionic liquid (IL) 1-Butyl-3-Methylimidazolium Acetate (BmimAc) is a strong solvent for both, native cellulose and cellulose II. The dissolution process is strongly depended on the temperature and viscosity of the IL-cellulose solution. Next to complete dissolution, rayon fibre can be dissolved partially to achieve the formation of a matrix phase in situ. The highly hydrophilic cellulose based materials show different amounts of shrinkage after composite processing when the coagulant necessary to regenerate the dissolved cellulose is removed by evaporative drying.
Multilayered, “thick” composite laminates could be produced by a simple hand-impregnation of rayon and linen textiles with the solvent and partial dissolution of the cellulosic textiles. A solvent infusion process (SIP) based on vacuum assisted resin infusion was successfully developed to process ACCs. The application of pressure during SIP is crucial to achieve good interlaminar adhesion. The SIP based laminates showed improved tensile strength and stiffness compared to the hand impregnation process.
An analysis of the processing parameters showed that the drying process used to remove the coagulant is important to achieve good fibre-matrix-bonding as harsh evaporative drying causes shrinkage induced cracks in the created matrix phase. Using ethanol as a coagulant instead of water reduced composite swelling and corresponding shrinkage, but leads to a strong reduction in crystallinity of the regenerated cellulose, as shown X-ray diffraction and solid state NMR measurements. Regeneration in distilled water, followed by drying at room temperature produced the best ACC laminate.
The SIP based laminates showed high flexural and impact strength compared to other biocomposites. The composites were also found to be easily compostable especially compared to a PLA-rayon composite.
The rayon fibre was processed on an ITA 3D rotary braiding machine, generally used for the processing of stronger and stiffer glass and carbon fibres. A rectangular profile was produced and analysed. The fibre strength and Young’s modulus were unaffected by the braiding process. The braid could be processed into an ACC by immersion in IL for 60 min at 100 °C. The so produced ACCs showed further improvements in tensile and impact strength due to improved through the thickness strength.
|
6 |
Exploring gas-phase ionic liquid aggregates by mass spectrometry and computational chemistryGray, Andrew Peter January 2012 (has links)
Ionic liquids (IL) are salts which are liquid at low temperatures, typically with melting points under 100 °C. In recent years ILs have been treated as novel solvents and used in a wide variety of applications such as analytical and separation processes, electrochemical devices and chemical syntheses. The properties of many ILs have been extensively studied; these studies have primarily focused on the investigation of key physical properties including viscosity, density and solubility. This thesis presents mass spectrometry (MS) and computational data to investigate the intrinsic interactions between a small number of IL ions and also their interactions with contaminants. MS was used to study gas-phase aggregates of three ILs based on the 1-butyl-3- methylimidazolium (C4mim+) cation. The influence of different ion sources was investigated on C4mimCl. Conventional electrospray ionisation (ESI) and nano-ESI techniques were compared with recently developed sonic-spray ionisation (SSI) and plasma assisted desorption ionisation (PADI). SSI was found to be beneficial to the formation of larger aggregates while PADI was significantly less efficient. Gas-phase structures of the singly charged cationic aggregates of C4mimCl were characterised with the aid of collision induced dissociation (CID) and density functional theory (DFT) calculations. Additionally, CID and DFT gave consistent results for the relative stability of the C4mimCl aggregates, showing a good agreement between experiment and theory. Mixed solutions of C4mimCl with a range of metal chloride salts were used to form aggregates incorporating both IL and metal chlorides. LiCl, NaCl, KCl, CsCl, MgCl2 and ZnCl2 were all combined with C4mimCl. Magic number characteristics were observed for a number of pure IL and mixed aggregates. Many of the mixed species were characterised using MS and DFT calculations. In particular, the relative stabilities were determined and the structures of the aggregates were calculated. It was found that the metal ions would normally act as a core for the aggregates with the stability determined by the metal-chlorine binding strength and the steric hindrance of the aggregates. It was necessary to exploit pseudopotentials as opposed to all-electron basis sets for the larger aggregates and aggregates containing heavy atoms. While water is a very effective contaminant for ILs it was not possible to observe gas-phase IL aggregates incorporating this despite using multiple methods. Additionally the presence of protonated aggregates was likewise not observed throughout the range of experiments. Possible structures where these features would be incorporated were studied with DFT to obtain some insight into their lack of formation.
|
7 |
Nanoscale structure in isotopic and anisotopic low dielectric systemsHallett, James E. January 2015 (has links)
No description available.
|
8 |
Characterization of Ionic Liquid As a Charge Carrier for the Detection of Neutral Organometallic Complexes Using Electrospray Ionization Mass SpectrometryJoshi, Ubisha 08 1900 (has links)
A novel application of ionic liquid as a charge carrier for the analysis and detection of neutral organometallic complexes using a mass spectrometer has been presented. The mass spectrometer detects only charged compounds which raise a difficulty in analyzing a neutral molecule that lacks a basic site to associate with charge. Therefore, an effective way of providing charge has always been an area of keen interest in the field of mass spectrometry. Ionic liquids have a very fascinating property of forming a cation-? interaction with other molecules to give a charged complex. In order to take advantage of this, it is important to know the geometric structure of the complex. Advanced methodologies like hydrogen-deuterium exchange and computational calculations have been used assisting in better understanding of the structure of the ionic liquid complexes.
|
9 |
Développement de nouvelles méthodes d'analyse d'oligosaccharides anioniques bioactifs par spectrométrie de masse / Development of new methods for the analysis of bioactive anionic oligosaccharides by mass spectrometryPrzybylski, Cédric 11 February 2014 (has links)
Les interactions non-Covalentes entre des protéines et des polysaccharides anioniques tels que les glycosaminoglycanes (GAGs) interviennent dans de nombreux processus physio-Pathologiques tels que la signalisation, la reconnaissance cellulaire, les infections bactériennes et virales ou lors de la progression des cancers. Une des difficultés pour comprendre les mécanismes moléculaires mis en jeu lors de ces interactions réside dans le déchiffrage des informations structurales contenues dans les GAGs. Cette tâche est délicate, surtout en raison du degré variable d'acétylations et de sulfatations de ces GAG's, constituant des limitations importantes pour l'avancée des recherches en glycobiologie. Pour contourner ces restrictions, des méthodes analytiques fines et innovantes, telles que la spectrométrie de masse (MS) offrent de nombreux avantages. Durant cette thèse, trois approches originales basées sur la MS ont été developpées. La première a consisté à synthétiser de nouvelles matrices ioniques liquides limitant la désulfatation et favorisant l'obtention de dépôt homogène pour l'analyse par UV-MALDI-TOF. La seconde a montré le potentiel d'une méthode d'ionisation douce récemment introduite, la désorption ionisation assistée par électronébulisation (DESI) permettant l'analyse directe et en conditions ambiantes d'oligosaccharides anioniques seuls ou sous forme de complexes avec une protéine. Enfin, la troisième a nécessité la fabrication de puces à protéines ou à saccharides pour lanalyse de complexes protéines/GAG en utilisant le couplage de la résonance plasmonique de surface avec la MS (SPR-MS). Ce couplage permet d'effectuer le suivi en temps réel de la formation de complexes entre des protéines et des GAGs, d'en déterminer les constantes de la dissociation, puis de détecter directement par UV-MALDI-TOF les ligands, qu'ils soient de nature protéique ou saccharidique. / The non-Covalent interactions between proteins and anionic polysaccharides such as glycosaminoglycans (GAGs) are involved in several physio-Pathological processes such as cell signalling and recognition, bacterial and viral infections or during cancer progression. One of the obstacles to get the molecular mechanisms involved during these interactions hold in the structural information deciphering within GAG's sequences. This task is delicate especially because of variable level of acetylations and sulfations, constituting important bottleneck in the research advances of the glycobiology field. To bypass these restrictions, accurate and innovative analytical methods such as mass spectrometry (MS) provide numerous advantages. During this Ph.D training, three original MS based approaches have been developed. The first dealt with the synthesis of new ionic liquid matrices, which both restrict desulfation process and favour the homogeneous deposits for UV-MALDI-TOF analysis. The second way used a soft recently introduced ionization method, desorption electrospray ionization (DESI) allowing direct analysis in ambient conditions of anionic oligosaccharides or under complexes with protein. Finally, the third involved the making of protein or saccharide chips for the analysis of protein / GAG complexes using the hyphenation of surpface plasmon resonance with MS (SPR-MS). Thos coupling allows real time monitoring protein / GAG complexes formation, their dissociation constant determination and the direct detection of protéic as wall as saccharidic ligands by UV-MALDI-TOF.
|
10 |
DNA in Ionic Liquids and PolyelectrolytesKhimji, Imran January 2013 (has links)
DNA has been widely studied in a variety of solvents. The majority of these solvents consist of either aqueous or organic components. The presence of ions or salts in these solvents can further alter DNA properties by changing the melting point or helical structure. The size, charge, and concentration of these additional components can all affect the behaviour of DNA. A new class of solvents, known as ionic liquids have recently gained popularity. Ionic liquids are comprised of entirely of ions and can be liquid at room temperature. Due to their low volatility and ability to dissolve both polar and non-polar substances, they are generating high levels of interest as ‘green solvents’. Although the interaction between DNA and ionic liquids has been characterized, the potential of this interaction is still being studied. It was discovered that when DNA mixed with DNA intercalating dyes was added to ionic liquids, there was a large reduction in fluorescence. Although this fluorescence drop was believed to occur to removal of the dye molecule from the helix, the strength of this interaction has not been researched.
In this thesis, the interaction between different intercalating dyes and different ionic liquids was evaluated. We reasoned that perhaps the difference in interaction could be used as a method of separating the DNA-dye complex, which has previously never been accomplished. For example, it has been established that both DNA and cationic dyes have an affinity for ionic liquids. The relative strength of this affinity is undetermined, as well as the comparison to normal aqueous mediums. Although ionic liquids can drastically alter the stability of the DNA duplex by either raising or decreasing the melting point depending on the ionic liquid chosen, we found that the DNA actually has a higher affinity for the aqueous phase. Conversely, intercalating dyes prefer to partition into the ionic phase. The relative affinities of the two components are strong enough for their respective phases that the complex can be split apart and each component can be extracted, allowing for separation of the two.
|
Page generated in 0.0202 seconds