Coordenação de Aperfeiçoamento de Pessoal de Nível Superior / Nesta pesquisa utilizou-se um equipamento experimental que utiliza o método do eco-impacto produzido no Laboratório de Ensaios Físicos do Instituto Politécnico do Rio de Janeiro (UERJ/IPRJ), para estimar a espessuras de placas de concreto através da propagação de ondas de tensão geradas por um impacto. Para determinação dessa espessura, foram investigados vários mecanismos de estruturação do protótipo do equipamento com objetivo de se obter a melhor leitura possível, por meio das literaturas existentes. Entre parâmetros avaliados no estudo, estava o modelo de sensor a ser utilizado, o tipo de impactor, a precisão relacionada à aquisição de dados e o tratamento do mesmo, a distância entre o ponto de impacto e o transdutor (sensor), e o local de teste. Os resultados experimentais concordam com as previsões teóricas e revelam que este método é eficiente para análise de estrutura de concreto. A análise da espessura e resposta em frequência de um novo protótipo desenvolvido e os testes realizados possibilitou um erro médio de espessura real para amostras sem agregados de 0,39% e para as amostras com agregados com de 0,64%. Esses resultados apontam que o equipamento produzido tem potencial e que o mesmo pode ser utilizado para avaliação de estrutura de concreto. / In this research we used an experimental device that uses the method of impact-echo on Physical Testing Laboratory of the Polytechnic Institute of Rio de Janeiro (UERJ/IPRJ), to estimate the thickness of concrete slabs through the propagation of stress waves generated by an impact. To determine this thickness, several mechanisms for structuring the prototype equipment in order to obtain the best possible reading by means of existing literatures were investigated. Among the parameters evaluated in the study was the model of sensor being used, the type of impact, the precision related to the data acquisition and processing thereof, the distance between the impact point and the transducer (sensor), and test site. The experimental results agree with the theoretical predictions and show that this method is effective for analyzing concrete structure. The thickness analysis and frequency response of a new prototype and testing allowed an average error of actual thickness for samples without aggregates and 0.39 % for samples with aggregates with 0.64 %. These results indicate that the product produced has potential and that it can be used for evaluation of concrete structure.

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior / Nesta pesquisa utilizou-se um equipamento experimental que utiliza o método do eco-impacto produzido no Laboratório de Ensaios Físicos do Instituto Politécnico do Rio de Janeiro (UERJ/IPRJ), para estimar a espessuras de placas de concreto através da propagação de ondas de tensão geradas por um impacto. Para determinação dessa espessura, foram investigados vários mecanismos de estruturação do protótipo do equipamento com objetivo de se obter a melhor leitura possível, por meio das literaturas existentes. Entre parâmetros avaliados no estudo, estava o modelo de sensor a ser utilizado, o tipo de impactor, a precisão relacionada à aquisição de dados e o tratamento do mesmo, a distância entre o ponto de impacto e o transdutor (sensor), e o local de teste. Os resultados experimentais concordam com as previsões teóricas e revelam que este método é eficiente para análise de estrutura de concreto. A análise da espessura e resposta em frequência de um novo protótipo desenvolvido e os testes realizados possibilitou um erro médio de espessura real para amostras sem agregados de 0,39% e para as amostras com agregados com de 0,64%. Esses resultados apontam que o equipamento produzido tem potencial e que o mesmo pode ser utilizado para avaliação de estrutura de concreto. / In this research we used an experimental device that uses the method of impact-echo on Physical Testing Laboratory of the Polytechnic Institute of Rio de Janeiro (UERJ/IPRJ), to estimate the thickness of concrete slabs through the propagation of stress waves generated by an impact. To determine this thickness, several mechanisms for structuring the prototype equipment in order to obtain the best possible reading by means of existing literatures were investigated. Among the parameters evaluated in the study was the model of sensor being used, the type of impact, the precision related to the data acquisition and processing thereof, the distance between the impact point and the transducer (sensor), and test site. The experimental results agree with the theoretical predictions and show that this method is effective for analyzing concrete structure. The thickness analysis and frequency response of a new prototype and testing allowed an average error of actual thickness for samples without aggregates and 0.39 % for samples with aggregates with 0.64 %. These results indicate that the product produced has potential and that it can be used for evaluation of concrete structure.

The dissertation thesis deals with the study of non-destructive acoustic methods as instruments for monitoring and analysing corrosion of reinforcing steel in reinforced concrete elements. Four acoustic methods were selected for this task - the impact-echo method, the nonlinear acoustic spectroscopy method, the acoustic emission method, and the ultrasonic pulse velocity method. To verify the functionality of these methods, testing was carried out on three sets of reinforced concrete samples that had been exposed to the effects of sodium chloride, which corroded the embedded steel reinforcement in these samples. Suitable parameters were proposed for individual acoustic methods to monitor corrosion of the reinforcements. In addition, experiments were designed to demonstrate the ability of the selected acoustic methods to reveal the corrosion of steel reinforcement and its influence on the concrete matrix and to assess the condition of the degraded elements and structures. The analysis of the measurement results based on their comparison shows the advantages and disadvantages of the individual methods and of their practical applications. To verify the results, correlation with common methods that are currently used for the study of corrosion was carried out and included for example the electrical resistivity measurement of the reinforcement and simultaneous monitoring of the sample surface using a confocal microscope to record the development of microcracks during the degradation.

<p dir="ltr">Bridge decks in Indiana face the brunt of the deterioration mechanisms associated with structural deficiencies. These deficiencies do not always present themselves in noticeable ways, however, their detection is imperative to the performance of the deck and the bridges’ overall health. The inspection of these bridge decks presents engineers with not only a timely, but dangerous process as maintenance of traffic (MOT) from the states’ department of transportation (DOT) is not a viable option for most inspections. This results in engineers taking an unnecessary risk to inspect these decks for deteriorations. The most detrimental of these structural deficiencies, delaminations, do not always result in visual confirmation. Leading to more time spent in the roadway trying to sound for these defects. This thesis introduces a state-of-the-art review of previous NDT studies in relation to bridge structures along with the validation of their results. Background information on all testing methods being evaluated will also be provided in this study. This thesis also presents an in depth investigation using multiple consultants and a variety of NDT methods to assess the viability of delamination detection in relation to these methods. These methods were verified through coring at select locations on the deck. This thesis then discusses the practical implications of these NDT methods that provide an accurate level of delamination detection on project and network level inspections.</p>