No description available.

O crescimento de pontos quânticos a partir do descasamento dos parâmetros de rede tem sido alvo de intensos estudos nos últimos dez anos. Conhecer as propriedades eletrônicas destes materiais é chave para a engenharia de sistemas quânticos. O objetivo deste trabalho é estudar as propriedades eletrônicas de pontos quânticos (QD) de InAS1-x Px enterrados em GaAs, através de Espectroscopia de Capacitância (CV). A Espectroscopia CV é uma técnica que permite determinar os estados eletrônicos e a distribuição de cargas do sistema. As amostras de InAS1-x Px foram crescidas por MOCVD (Low-Pressure Metalorganic Chemical Vapor Deposition) sobre um substrato de GaAs:Cr (001). A estrutura das amostras é do tipo MIS (Metal-Isolante-Semicondutor) com um contato traseiro do tipo n. As medidas de capacitância foram feitas a 4,2 K para diferentes valores de freqüência e campo magnético. A partir da dispersão dos estados confinados com o campo magnético aplicado perpendicular ao plano dos pontos quânticos, pode-se determinar, &#9690, a freqüência natural do sistema. A partir de &#9690, determinou-se &#87470, o comprimento característico da função de onda. A concordância entre os valores de &#87470 com as dimensões laterais dos pontos quânticos obtidos por microscopia eletrônica de transmissão (TEM) é boa. Finalmente, através das medidas de espectroscopia CV pode-se separar os efeitos de confinamento lateral e vertical, permitindo um melhor entendimento dos espectros de fotoluminescência (PL), assim como os detalhes da forma dos QD obtidos por TEM. / The growth of quantum dots in the Stranski-Krastranov mode has been subject of intense investigation in the last decade. Knowing the electronics properties of these materials is key for performing quantum systems engineering. The objective of this work is to study the quantum dots (QD) electronic properties of the InAS1-x Px embedded in GaAs. The study was done by capacitance spectroscopy (CV), which is an experimental tool that allows the evaluation of the electronic states and the charge distribution of a given quantum device. The samples of InAS1-x Px were grown by Low-Pressure Metalorganic Chemical Vapor Deposition on GaAs:Cr (001) substrates. They consist of metalinsulator-semiconductor structures with an n-type back contact. The measurements were performed at 4.2 K for different values of frequencies and magnetic field. From the confined states dispersion as a function of the applied magnetic field, perpendicular to the QD plane, the system natural frequency, &#9690, was determined. From the &#9690, we could determine the wave function characteristic length, &#87470. The concordance between the &#87470, values and the lateral sizes obtained by Transmission Electronic Microscopy (TEM) is good. Finally, by CV spectroscopy we could separate the lateral and vertical confinement effects, leading to a more complete understanding of the Photoluminescence (PL) spectra, as well as the details of the QD shape obtained by TEM.

O crescimento de pontos quânticos a partir do descasamento dos parâmetros de rede tem sido alvo de intensos estudos nos últimos dez anos. Conhecer as propriedades eletrônicas destes materiais é chave para a engenharia de sistemas quânticos. O objetivo deste trabalho é estudar as propriedades eletrônicas de pontos quânticos (QD) de InAS1-x Px enterrados em GaAs, através de Espectroscopia de Capacitância (CV). A Espectroscopia CV é uma técnica que permite determinar os estados eletrônicos e a distribuição de cargas do sistema. As amostras de InAS1-x Px foram crescidas por MOCVD (Low-Pressure Metalorganic Chemical Vapor Deposition) sobre um substrato de GaAs:Cr (001). A estrutura das amostras é do tipo MIS (Metal-Isolante-Semicondutor) com um contato traseiro do tipo n. As medidas de capacitância foram feitas a 4,2 K para diferentes valores de freqüência e campo magnético. A partir da dispersão dos estados confinados com o campo magnético aplicado perpendicular ao plano dos pontos quânticos, pode-se determinar, &#9690, a freqüência natural do sistema. A partir de &#9690, determinou-se &#87470, o comprimento característico da função de onda. A concordância entre os valores de &#87470 com as dimensões laterais dos pontos quânticos obtidos por microscopia eletrônica de transmissão (TEM) é boa. Finalmente, através das medidas de espectroscopia CV pode-se separar os efeitos de confinamento lateral e vertical, permitindo um melhor entendimento dos espectros de fotoluminescência (PL), assim como os detalhes da forma dos QD obtidos por TEM. / The growth of quantum dots in the Stranski-Krastranov mode has been subject of intense investigation in the last decade. Knowing the electronics properties of these materials is key for performing quantum systems engineering. The objective of this work is to study the quantum dots (QD) electronic properties of the InAS1-x Px embedded in GaAs. The study was done by capacitance spectroscopy (CV), which is an experimental tool that allows the evaluation of the electronic states and the charge distribution of a given quantum device. The samples of InAS1-x Px were grown by Low-Pressure Metalorganic Chemical Vapor Deposition on GaAs:Cr (001) substrates. They consist of metalinsulator-semiconductor structures with an n-type back contact. The measurements were performed at 4.2 K for different values of frequencies and magnetic field. From the confined states dispersion as a function of the applied magnetic field, perpendicular to the QD plane, the system natural frequency, &#9690, was determined. From the &#9690, we could determine the wave function characteristic length, &#87470. The concordance between the &#87470, values and the lateral sizes obtained by Transmission Electronic Microscopy (TEM) is good. Finally, by CV spectroscopy we could separate the lateral and vertical confinement effects, leading to a more complete understanding of the Photoluminescence (PL) spectra, as well as the details of the QD shape obtained by TEM.

No description available.

Electroabsorption and electrorefraction were studied in GaAs/AlGaAs and InP/InAsP multiple quantum well waveguides. Measurements of changes of the absorption coefficient and the refractive index with wavelength and bias voltage were made. Switching ratios of up to 18 dB were obtained for the GaAs/AlGaAs material. The Kramers-Kronig relation was used to calculate the theoretical phase shifts from the absorption coefficient data. / Thesis / Master of Engineering (ME)

Photodetectors are used in many applications such as digital and thermal cameras or in solar panels. They can also be designed to detect the omnipresent high-energy radiation/particles, and for radiation imaging in biomedical applications. Novel nanostructures offer significant advantages compared to traditional designs for the realization of fast, sensitive, compact and cheap sensors and efficient solar cells. Examples of such nanostructures include quantum dots (QDs), quantum wells (QWs) and NW arrays. This thesis is devoted to experimental investigations of effects of high-energy (1 MeV) protons on the optical and electrical performance of InP/InAsP NW-based QDiscs-in wire photodetectors. The proton-induced degradation of the optical performance has been studied by means of Fourier Transform Infrared (FTIR) photocurrent spectroscopy. The spectrally resolved photocurrent (PC) and current-voltage (I-V) characteristics were measured at low temperature (5 K and 77K) and at room temperature (300K) before and after 1 MeV proton irradiation under vacuum conditions with fluences ranging from 1.0×1012–3.0×1013 cm-2. The particle radiation exposure has been done in the Ion Beam Accelerator at the Department of Nuclear Physics Department at Lund University. Considering both PC and I-V characteristics, it was found that the devices were sensitive to all proton irradiation at all fluences. In general, the PC intensity significantly increased after radiation for all fluences, however, a week after exposure the PC and dark current gradually recovered. At 3×1012 p/cm2 fluence level, it was figured out that photocurrent which attributed to QDiscs disappeared for a couple of days after exposure, however, over time and gradually, those started to manifest again even at low and room temperatures, causing radiation-induced changes in device parameters to be time-dependent; however, it was not recorded any signals related to QDiscs at fluence of 3×1013 p/cm2. Substantial changes in the dark I-V characteristics, as well as increases in the dark current, are observed after irradiation. The influence of proton irradiation on light and dark current characteristics also indicated that NW structures are a good potential candidate for radiation harsh-environment applications. It was also observed a significant increase in dark current after the radiation for all devices, however, by applying the voltage to the photodetectors, the PC and I-V characteristics gradually being to diminish, which may be attributed to an annealing process.

Le siècle dernier a vu l'accomplissement de la mécanique quantique, du traitement de l'information et de l'optique intégrée. Aujourd'hui, ces trois domaines se rencontrent pour donner naissance à l'optique intégrée pour les communications quantiques. Un des enjeux aujourd'hui dans ce domaine est le développement de sources de photons uniques et de lasers compacts aux longueurs d'onde des télécommunications. Les émetteurs étudiés dans ce travail de thèse sont des boîtes quantiques InAsP/InP [001] obtenues par Epitaxie en Phase Vapeur aux OrganoMétalliques (EPVOM). Il a été démontré, par l'intermédiaire de mesures spectrales et des mesures de durée de vie, que ces émetteurs présentent les caractéristiques nécessaires en vue des applications visées. Plus particulièrement, la mise en évidence expérimentale d'un dégroupement de photons, à partir d'une boîte unique, valide la possibilité de réaliser une source de photons uniques. En parallèle, des études sur les lasers à cristaux photoniques de faible volume modal et fort facteur de qualité, utilisant les mêmes boîtes quantiques à température ambiante, ont montré des propriétés originales, particulièrement sur la physique au niveau du seuil laser. La différence de comportement au niveau du seuil, par rapport aux lasers conventionnels, s'explique dans nos structures par le fort taux de couplage de l'émission spontanée dans le mode laser.

The rapid progress on developing new and improved multifunctional materials, for optoelectronic and spin based phenomena/devices, have increased the importance of the fundamental understanding of their coherent states and nonlinear optical properties. This study is aimed at characterizing, modeling, and controlling the fundamental electronic, phononic, and spin properties of several classes of materials through nonequilibrium and nonlinear light-matter interactions, coupled with a novel design of the material phases, interfaces, and heterostructures. This research directly addresses the Grand Challenges identified in the Basic Energy Sciences Advisory Committee report "Directing Matter and Energy: Five Challenges for Science and the Imagination" (Hemminger, 2007) [1], in particular, the area: "Matter far beyond equilibrium" and addresses the questions, "How do remarkable properties of matter emerge from complex correlations of the atomic or electronic constituents and how can we control these properties?" and "How do we design and perfect atom- and energy-efficient synthesis of revolutionary new forms of matter with tailored properties?". The knowledge gained from these fundamental studies can provide new information for a broad community to provide concepts for the next generation of multifunctional materials and devices, and resulted in several publications and conference presentations. The materials studied in this dissertation included multiferroic BaTiO3-BiFeO3 [2], ferroelectric Pb0.52Zr0.48TiO3 (PZT), InAs/AlAsSb multi-quantum-well [3], lead halide perovskite [4], n-type InAsP films [5, 6], and nanolaminate plasmonic crystals [7]. Probing multiferroics, which are materials that can exhibit ferromagnetic, ferroelectric, and ferroelastic orders simultaneously in a single phase, was a main focus of this study. BiFeO3 (BFO) is the most widely investigated multiferroic due to its high Neel and Curie temperatures and has antiferromagnetic and ferroelectric properties [8]. An inherent drawback of BFO is its large leakage currents. In this project, (1 − x)BaTiO3-(x)BiFeO3, x = 0.725 (BTO-BFO) heterostructures were investigated [9], where the conductivity of the solid solution can be reduced by adding another perovskite material, BaTiO3 [2]. We aimed to study optically induced coherent states in our BTO-BFO structures. Time resolved pumpprobe spectroscopic measurements were performed at room temperature as well as at low temperature (100 K) up to 10 T. Coherent acoustic phonons were observed both in a film and nanorods, resulting in coherent phonon frequencies of 27 and 33 GHz, respectively [2]. Coherent phonon spectroscopy is a sensitive tool to characterize the interfaces and can be employed as an effective ultrasensitive quantum sensor [10]. Furthermore, in the nanorods arrays of BTO-BFO, an additional oscillation with frequency in the range of 8.1 GHz was observed. This frequency is close to a theoretically predicted magnon frequency which could indicate the coexistence of coherent phonons and magnons in the nanorods arrays [2]. In an analogy to photonics which relies on electromagnetic waves, magnonics utilizes spin waves to carry and process information, offering several advantages such as an operation frequency in the THz range. Recently, "a quantum tango" [11] was reported where coupled coherent magnon and phonons modes were formed on a surface patterned ferromagnet. Furthermore, BTO-BFO heterostructures were probed using transient birefringence and magneto-optical Kerr effect spectroscopy. The results demonstrated that the magnetic field dependence of coherent phonons, measured by these two techniques, exhibits more sensitivity to the external magnetic fields compared to the differential reflectivity technique [2]. Moreover, nonlinear optical properties of this structure were investigated via second harmonic generation spectroscopy, where wavelength and polarization dependence of this nonlinear observation will be discussed in this dissertation. As part of this study, another class of multiferroic materials, with strong ferroelectric and piezoelectric properties, Pb0.52Zr0.48TiO3 (PZT) was studied [12]. In this project, the nonlinear optical properties of PZT nanorod arrays were investigated. Clear signatures of second harmonic generations from 490-525 nm (2.38-2.53 eV) at room temperature, were observed. Furthermore, time resolved differential reflectivity measurements were performed to study dynamical properties in the range of 690-1000 nm where multiphoton processes were responsible for the photoexcitations. We compared this excitation scheme, which is sensitive mainly to the surface states, to when the photoexcited energy (∼ 3.1 eV) was close to the bandgap of the nanorods. Our results offer promises for employing these nanostructures in nonlinear photonic applications. Furthermore, the established techniques during my research provided new insights on optical properties of InAs/AlAsSb multi-quantum-well [3], lead halide perovskite [4], n-type InAsP films [5, 6], and nanolaminate plasmonic crystals [7], and the results will be briefly presented in this dissertation. / Doctor of Philosophy / My research activities have explored multifunctional materials and heterostructures with strongly enhanced coupled electric and magnetic orders and optical properties. In particular, pursuing novel heterostructure designs such as multiferroics can provide control over electric and magnetic ordering in mixed dimensionality. This, together with control at the level from lattice structure to electron spin states can give rise to improved or even qualitatively new and robust materials properties. For example, a better understanding of the phenomena associated with the spin degree of freedom of electrons allows for advancement in spintronic device applications such as storage, logic, and sensors, which are associated with quantum computers and quantum communications [13, 14, 15]. Overarching questions and goals of my activities included: What are the microscopic origins and mechanisms of nonlinear response in strongly coupled nanostructured materials and its relationship to electronic, spin, and lattice degrees of freedom? (2) What are the effects of dimensionality and quantum confinement on optical properties? (3) How do we control and manipulate the coherent states, such as coherent phonons and magnons using external and internal fields, material composition, and morphology to achieve maximal efficiency and tunability? Addressing many of the challenges in the fast-paced technological world requires continued developments of new materials with enhanced optical properties. The knowledge gained from my fundamental studies can provide new information for the next generation of multifunctional materials and devices with advanced optical properties and resulted in several publications and conference presentations.

Le siècle dernier a vu l'accomplissement de la mécanique quantique, du traitement de l'information etde l'optique intégrée. Aujourd'hui, ces trois domaines se rencontrent pour donner naissance à l'optiqueintégrée pour les communications quantiques. Un des enjeux aujourd'hui dans ce domaine est ledéveloppement de sources de photons unique aux longueurs d’onde des télécommunications fibrés.Durant ce travail de thèse les émetteurs étudiés sont des boîtes quantiques d’InAsP épitaxiés parEPVOM (Epitaxie en Phase Vapeur aux OrganoMétalliques). On démontrera que ces objets uniquessont capables d’émettre des états quantiques de la lumière grâce à une expérience de dégroupement dephotons. De plus la spectroscopie de ces objets sera déduite des études résolues en temps. Lapossibilité d’intégrer ces objets au sein de nanocavité de taille ultime permet de modifier leur tauxd’émission spontanée, ainsi les résultats obtenus grâce aux cavités métalliques permettent d’observerune accélération de l’émission spontanée sur une large bande spectrale. Finalement il a été mis enévidence une forte modification de l’émission d’un ensemble de boîtes quantiques entre 4K et 300K,en utilisant une technique originale basé sur l’effet laser. / The last century saw the advent of quantum mechanics, information processing and integrated optics.These fields lead to the integrated optics for quantum communication. One of the challenges is thedevelopment of single photon sources operating at fiber’s telecommunication wavelength. In this workwe use quantum dots growth by MOVPE (MetalOrganic Vapour Phase Epitaxy). We demonstratethese emitters can generate some quantum state of light thanks to the antibunching experiment.Moreover the spectroscopy of these objects will be deducted by the time resolved spectroscopy. Thepossibility to integrate these sources in ultimate’s size cavity permits to modify the spontaneous rateemission, so the result obtain with metallic cavity permit to observe an acceleration of the spontaneousemission on a wide spectral band. Finally a strong emission modification of the quantum dot’sensemble between 4K and 300K will be presented by using an original way based on the laser effect.

Le siècle dernier a vu l'accomplissement de la mécanique quantique, du traitement de l'information etde l'optique intégrée. Aujourd'hui, ces trois domaines se rencontrent pour donner naissance à l'optiqueintégrée pour les communications quantiques. Un des enjeux aujourd'hui dans ce domaine est ledéveloppement de sources de photons unique aux longueurs d'onde des télécommunications fibrés.Durant ce travail de thèse les émetteurs étudiés sont des boîtes quantiques d'InAsP épitaxiés parEPVOM (Epitaxie en Phase Vapeur aux OrganoMétalliques). On démontrera que ces objets uniquessont capables d'émettre des états quantiques de la lumière grâce à une expérience de dégroupement dephotons. De plus la spectroscopie de ces objets sera déduite des études résolues en temps. Lapossibilité d'intégrer ces objets au sein de nanocavité de taille ultime permet de modifier leur tauxd'émission spontanée, ainsi les résultats obtenus grâce aux cavités métalliques permettent d'observerune accélération de l'émission spontanée sur une large bande spectrale. Finalement il a été mis enévidence une forte modification de l'émission d'un ensemble de boîtes quantiques entre 4K et 300K,en utilisant une technique originale basé sur l'effet laser.