O uso do cálculo termodinâmico e consequentemente base de dados desenvolvidas para esse propósito é hoje uma das ferramentas fundamentais para o aprimoramento e desenvolvimento de superligas a base de níquel. A proposta deste trabalho foi avaliar a confiabilidade de uma base de dados comercial, específica para superligas a base de níquel, utilizada em softwares de cálculos termodinâmicos computacionais. Comparou-se os dados experimentais da superliga Inconel 713LC com informações obtidas através do calculo termodinâmico para a composição química específica da superliga estudada. As amostras da superliga comercial Inconel 713LC foram retiradas de barras da liga fundida a vácuo (VIM). Os tratamentos térmicos foram realizados sob atmosfera de argônio em cápsulas de quartzo nas temperaturas de 600?C, 900?C e 1250 ?C nos tempos de 10h, 24h, 50h, 100h, 250h, 500h, 1000h e 2000 horas, de acordo com a temperatura de tratamento utilizada, visando acompanhar o desenvolvimento microestrutural até alcançar a condição de equilíbrio termodinâmico. Previamente, a amostra no estado bruto de fusão e as amostras após os tratamentos de equilíbrio foram caracterizadas microestruturalmente via microscopia eletrônica de varredura (MEV) e a composição das fases medidas por microanálise de energia dispersiva (EDS). As temperaturas das transformações de fases foram medidas por analise térmica diferencial (DTA). Nas amostras também foram realizadas medidas de microdureza para acompanhar indiretamente a evolução microestrutural da fase gama prime. Para os cálculos termodinâmicos foram utilizados o software Thermo-Calc® e a base de dados TTNi8 da empresa Thermotech Ltd®. / The computational thermodynamic simulation and the databases designed for this purpose are today one the most important tools to develop new nickel based superalloys. The aim of this work was to check the reliability of a commercial database, designed specifically for Ni-based superalloys. The experimental phase diagram data of Inconel 713LC, such as, liquidus and solidus temperatures as well as chemical phase compositions were compared with thermodynamic information extracted from computational simulations. Samples of a commercial superalloy Inconel 713LC were extracted from an ingot produced by Vacuum Induction Melting (VIM) and heat treated under argon in quartz capsules at 600?C, 900 ?C and 1250?C for 10h, 24h, 50h, 100h, 250h, 500h, 1000h and 2000h, according to the treatment temperature used, aiming at reaching the thermodynamic equilibrium conditions. The as-cast and all heat-treated samples were characterized by Scanning Electron Microscopy (SEM) and the chemical compositions of the phases were measured via Energy Dispersive X-ray Spectroscopy (EDS). Temperatures of phase transformations were determined by Differential Thermal Analysis (DTA). Microhardness measurements were performed to indirectly follow the microstructural evolution of gamma prime. The Thermo-Calc® software and the TTNi8 database from Thermotech Ltd® were used for thermodynamic calculations.

O uso do cálculo termodinâmico e consequentemente base de dados desenvolvidas para esse propósito é hoje uma das ferramentas fundamentais para o aprimoramento e desenvolvimento de superligas a base de níquel. A proposta deste trabalho foi avaliar a confiabilidade de uma base de dados comercial, específica para superligas a base de níquel, utilizada em softwares de cálculos termodinâmicos computacionais. Comparou-se os dados experimentais da superliga Inconel 713LC com informações obtidas através do calculo termodinâmico para a composição química específica da superliga estudada. As amostras da superliga comercial Inconel 713LC foram retiradas de barras da liga fundida a vácuo (VIM). Os tratamentos térmicos foram realizados sob atmosfera de argônio em cápsulas de quartzo nas temperaturas de 600?C, 900?C e 1250 ?C nos tempos de 10h, 24h, 50h, 100h, 250h, 500h, 1000h e 2000 horas, de acordo com a temperatura de tratamento utilizada, visando acompanhar o desenvolvimento microestrutural até alcançar a condição de equilíbrio termodinâmico. Previamente, a amostra no estado bruto de fusão e as amostras após os tratamentos de equilíbrio foram caracterizadas microestruturalmente via microscopia eletrônica de varredura (MEV) e a composição das fases medidas por microanálise de energia dispersiva (EDS). As temperaturas das transformações de fases foram medidas por analise térmica diferencial (DTA). Nas amostras também foram realizadas medidas de microdureza para acompanhar indiretamente a evolução microestrutural da fase gama prime. Para os cálculos termodinâmicos foram utilizados o software Thermo-Calc® e a base de dados TTNi8 da empresa Thermotech Ltd®. / The computational thermodynamic simulation and the databases designed for this purpose are today one the most important tools to develop new nickel based superalloys. The aim of this work was to check the reliability of a commercial database, designed specifically for Ni-based superalloys. The experimental phase diagram data of Inconel 713LC, such as, liquidus and solidus temperatures as well as chemical phase compositions were compared with thermodynamic information extracted from computational simulations. Samples of a commercial superalloy Inconel 713LC were extracted from an ingot produced by Vacuum Induction Melting (VIM) and heat treated under argon in quartz capsules at 600?C, 900 ?C and 1250?C for 10h, 24h, 50h, 100h, 250h, 500h, 1000h and 2000h, according to the treatment temperature used, aiming at reaching the thermodynamic equilibrium conditions. The as-cast and all heat-treated samples were characterized by Scanning Electron Microscopy (SEM) and the chemical compositions of the phases were measured via Energy Dispersive X-ray Spectroscopy (EDS). Temperatures of phase transformations were determined by Differential Thermal Analysis (DTA). Microhardness measurements were performed to indirectly follow the microstructural evolution of gamma prime. The Thermo-Calc® software and the TTNi8 database from Thermotech Ltd® were used for thermodynamic calculations.

The present diploma thesis is focused on the effect of AlCr layer on the low cycle fatigue behaviour of cast polycrystalline superalloy IN713LC at 800°C. Protective layer is made by chemical vapour deposition followed by heat treatment. Fatigue tests were conducted in strain control mode with constant total strain amplitude and strain rate. The fatigue behaviour is assessed by cyclic hardening/softening curves, cyclic stress-strain curves, Manson-Coffin curves and Basquin curves. Microstructure was observed in as-received state and also after cyclic loading by means of optical microscopy and SEM.

Nickel superalloys are used for high-temperature application in energetic and aerospace industry. They are exposed to aggressive environment at high temperatures with the interactions between fatigue and creep processes, high-temperature oxidation, corrosion and erosion. Lifetime extension of such strained parts while increasing the performance of particular machine is possible by applying protective surface coatings. The subject of this work is to investigate the fatigue failure mechanisms of superalloy Inconel 713LC at 800 °C and to compare these mechanisms between material with a protective coating based on Al-Si and material without coating. The location of initiation fatigue cracks, their propagation and the fatigue crack propagation rate in some areas were analyzed by optical microscopy, scanning electron microscopy and confocal laser scanning microscopy. Based on previous research it was found that the application of the coating AlSi has a positive effect on lifetime of alloy Inconel 713LC. These results were confirmed and estimated in the diploma thesis.

Masters thesis deals with formation of diffusion barrier coatings by means of powder mixtures chemical vapor deposition. Its theoretical part is focused on the problems with diffusion barriers formation, where predominantly three most commonly used methods are introduced, i.e. CVD from powder mixtures, active gasses and slurries. The experimental part of master thesis deals with the formation of nickel-aluminide diffusion barriers on Inconel 713LC superalloy substrate, where was for aluminization used six different powder mixtures at the temperature of 800 °C and dwell of 0, 2 and 5 hours.