Facile procedures based on hyphenated ion-exchange chromatography (IEC) and inductively coupled plasma mass spectrometry (ICP-MS) were developed to determine conditional stability constants, speciate chromium species and investigate the reduction of Cr(VI). 1. Improvements were made to a method previously developed to determine the conditional stability constant, Kf’, and chelation number, n, using IEC-ICP-MS. This method allowed the accurate determination of the conditional stability constant of a simple system. However, the corresponding chelation number was significantly different to the expected value because the principal assumption, i.e. that the ligand was in excess, was not realized in the experimentation. Furthermore, it neglected complexes other than that formed with EDTA4-. By taking into account these factors, accurate Kf’ and n were obtained for Co-EDTA and Zn-EDTA systems. 2. A simple method was developed for chromium speciation analysis at sub-µg L-1 level in potable water by IEC-ICP-MS. Cr(VI) and Cr(III) were separated on IonPac® AG-7 guard column within 7.5 minutes using gradient elution with 0.1 M ammonium nitrate and 0.8 M nitric acid. H2 collision/reaction interface gas eliminated chlorine-based and carbon-based polyatomic interferences on Cr detection. Water samples were analyzed directly, without any pretreatment. The accuracy of the method was verified through accurate analysis of riverine water certified reference material. Limits of detection of 0.02 and 0.04 µg L-1 for Cr(VI) and Cr(III), respectively, were obtained. 3. This speciation analysis method was then used for kinetics studies of Cr(VI) reduction in acidified riverine water. Water was spiked with Cr(VI), with or without Cr(III), and evolution of each Cr species with time was monitored by speciation analysis, showing that the reduction of Cr(VI) was a pseudo first order reaction. By plotting the logarithm of the peak area ratio of the instant Cr(VI) concentration over that of the original spiking versus time, the reaction rate constant was obtained as the slope. The reduction rate increased with decreasing pH and increasing temperature. The activation energy of the reaction at pH 1.3 was calculated using an Arrhenius plot. This method offers the advantages of small sample consumption, minimal sample manipulation, and easy data interpretation. / Thesis (Ph.D, Chemistry) -- Queen's University, 2010-09-30 08:05:27.342

In this thesis, new approaches to direct trace metals analysis of solid samples by inductively coupled plasma spectroscopy were investigated using laser ablation and thermal vaporization systems for solid sample introduction of biological, environmental, and pharmaceutical samples. / Laser ablation with inductively coupled plasma atomic emission spectroscopy (ICP-AES) and inductively coupled plasma mass spectrometry (ICP-MS) was applied to pharmaceutical tablets. Precision of analysis depended on laser parameters and could be improved using signal ratios. The feasibility of using laser ablation-ICP-MS for detecting natural levels of mercury along a single human hair strand was also demonstrated. / As well, the use of an induction-heating electrothermal vaporizer (IH-ETV) coupled to an ICP-MS was successful in determining mercury concentrations in a single human hair strand. Methodologies for multielement analysis of powdered hair were also explored using IH-ETV-ICP-MS. While calibration by reference hair materials showed promise, calibration methods by liquid standards were not suitable for any element. Detection limits achieved for most elements were below natural levels found in human hair. / IH-ETV-ICP-AES was also applied to the analysis of analyze-laden chromatographic powder. This study showed potential problems that may arise due to the methodology taken to analyze such materials. Finally, recommendations for future investigations and methodologies for laser ablation and thermal vaporization are discussed.

The Neolithic and late Iron Age pottery from the settlement site of Pool, Sanday, Orkney, was studied on two levels. Firstly, a morphological and technological study was carried out to establish a sequence for the site. Secondly an assessment was made of the usefulness of X-ray Fluorescence Analysis, Inductively Coupled Plasma Spectrometry and Petrological analysis to coarse ware studies, using the Pool assemblage as a case study. Recording of technological and typological attributes allowed three phases of Neolithic pottery to be identified. The earliest phase included sherds of Unstan Ware. This phase was followed by an assemblage characterised by pottery with incised decoration, which was stratified below a traditional Grooved Ware assemblage. The change in pottery styles and manufacturing methods with the Grooved Ware indicated that it evolved elsewhere. Grass tempered and burnished pottery characterised the Iron Age assemblage. Pottery samples from all phases of the site were analysed by XRF and ICPS. In addition, pottery from late Iron Age sites in the area was analysed for comparison with the Pool Iron Age pottery. XRF and ICPS analyses did not distinguish between either different phases at Pool or different Orcadian sites. This was attributed to the similarities in geological deposits over much of Orkney and the variations which can occur within a clay source. A clay survey was carried out in the vicinity of the site, and samples taken for comparison with the Pool pottery. Identification of rocks and minerals in thin section, and grain-size analysis, indicated that the Pool pottery was made locally to the site, and that both primary and secondary clays were used. It was concluded that petrological analysis is more suitable than elemental analysis in the study of coarse wares.

Thesis (Ph. D.)--University of Texas at Austin, 2007. / Vita. Includes bibliographical references.

Thesis (Ph.D.)--University of Melbourne, School of Earth Sciences, 2006. / Typescript. Includes bibliographical references (leaves 179-193).

Thesis (Ph.D.)--York University, 2006. Graduate Programme in Chemistry. / Typescript. Includes bibliographical references. Also available on the Internet. MODE OF ACCESS via web browser by entering the following URL: http://gateway.proquest.com/openurl?url_ver=Z39.88-2004&res_dat=xri:pqdiss&rft_val_fmt=info:ofi/fmt:kev:mtx:dissertation&rft_dat=xri:pqdiss:NR19763

Thesis (M. Sc.)--University of Pretoria, 2004. / Title from opening screen (viewed 12th March, 2005). Includes summary. Includes bibliographical references.

Thesis (Ph. D.)--Rutgers University, 2007. / "Graduate Program in Chemistry and Chemical Biology." Includes bibliographical references (p. 269-270).

Thesis (M.E.S.), Memorial University of Newfoundland, 1999. / Bibliography: p. 175-183.

Thesis (M. Sc.), Memorial University of Newfoundland, 1999. / Includes bibliographical references.