Spelling suggestions: "subject:"inductively coupled plasma spectrometry."" "subject:"lnductively coupled plasma spectrometry.""
1 |
Determination of trace metals in lubricating oils by ICP-OES. / Determination of trace metals in lubricating oils by inductively coupled plasma-optical emission spectrometry.Tekie, Haile Araya January 2013 (has links)
M. Tech. Chemistry. / Methods developed for the analysis of used oil can play a vital role in monitoring the condition of engines and may help to improve overall equipment effectiveness. Quantification of trace elements in used lubricating oil forms a vital part in monitoring engine conditions and impact on the environment. The main objective of this work is to investigate methods used for the accurate determination of trace elements in lubricating oils. In this study, inductively coupled plasma-optical emission spectrometry (ICP-OES) was used for the determination of trace elements (Ag, Ba, Cu, Mn and Ni) in lubricating oils.
|
2 |
Development of inductively coupled plasma spectroscopic methods for the determination of metals in beluga (delphinapterus leucas) and pygmy sperm (kogia breviceps) whale liver samples/Parlayan, Filiz. Eanes, Ritchie January 2005 (has links) (PDF)
Thesis (Master)--İzmir Institute of Technology, İzmir, 2005 / Keywords: ICP-OES, Chemometrics methods, internal standardization, matrix effects. Includes bibliographical references (leaves. 111-120).
|
3 |
Method development for the digestion and analysis of four common sedimentary lithologies using ICP-OES and ICP-MSDowner, Nicholas Ramsey 25 March 2010 (has links)
M.Sc. / The understanding of the classification and origin of geological systems is facilitated by the acquisition of accurate and precise analytical data. New instrumentation is rapidly developed for the preparation and quantitative analysis of geological materials using smaller amounts of sample, with lower limits of detection and faster analysis times. The development of new methodologies is crucial for the effective utilisation of new instrumentation. This study was conceptualised because of the relationship between the Department of Geology and the Central Analytical Facility of the Faculty of Science, University of Johannesburg. There is a high demand for accurate and precise chemical data for various lithologies and the availability of high-end analytical equipment, but little practical expertise to utilise this equipment to its full potential. The study is centred round the analysis of four common sedimentary lithological groups that are routinely studied by the Department of Geology namely carbonate rocks, shales, iron ore and manganese ore. A large literature base exists for the decomposition and analysis of geological materials. The bulk of this literature is centred round more established and conventional methods of sample preparation and analysis. The use of microwave digestion instrumentation and methodologies in recent times has revolutionised sample decomposition with shorter decomposition times, smaller sample masses required for decomposition, lower loss of analytes to volatilisation and creating a safer laboratory environment for analysts to work in. Inductively coupled plasma optical emission spectroscopy (ICP-OES) is a more mature method of sample analysis, being commercialised in the mid 1970’s, while inductively coupled plasma mass spectroscopy (ICP-MS) is a newer technique, v being commercialised as of the mid 1980’s. These two techniques are multi-element techniques, with low limits of detection and fast analysis times for a plethora of analytes, over seventy elements for ICP-OES and over eighty elements for ICP-MS. Samples from all four lithological groups were successfully digested in a microwave digestion unit with varying combinations of nitric acid (HNO3), hydrochloric acid (HCl), perchloric acid (HClO4) and hydrofluoric acid (HF) and various digestion programs. Accurate and repeatable methods of analysis were developed for iron, manganese, calcium and potassium for all four lithologies with ICP-OES; aluminium was successfully determined for shale, iron and manganese ore with ICP-OES. Titanium, sodium, arsenic, barium, bismuth, chromium, copper, molybdenum, scandium, strontium and vanadium were determined for all four lithotypes with acceptable accuracy and repeatability using ICP-MS.
|
4 |
An evaluation of emulsions in calibration strategies for oil analysis by ICP-OESKrusberski, Nicolle Birgit 05 March 2012 (has links)
M.Sc. / Emulsions are not widely used in industry for wear-metal-in-oil determinations and this study was undertaken in order to evaluate such a possibility. The use of emulsified standards was compared to aqueous standards for the calibration of an emulsified used lubricating oil sample. The traditionally used methods of ashing in a muffle furnace and dilution with the organic solvent, xylene were also evaluated in comparison with the emulsion methodology. Inductively coupled plasma optical emission spectrometry (ICP-OES) was used for the wear-metal-in-oil analysis. The performance characteristics of each method were compared for the following metals: AI, Cr, Cu, Fe, Ni, and Pb. The used oil sample and emulsified standards were acid treated and emulsified in water {1% wlw) using tetralin as solvent and triton X-100 as surfactant. This evaluation included the calibration characteristics, precision and accuracy obtained, as well as the results of recovery studies. The emulsification method was found to be comparable to the ashing and dilution methods in terms of calibration and only Cr, Cu, Fe and Pb concentrations were found. The precision of the emulsification method was found, in general, to be close to or less than 2% RSD. The used oil matrix also contained leaked petroleum from a problem car engine. An accurate determination of lead was consequently impossible since the high lead content led to sedimentation. The use of the internal standard, indium, was evaluated for its effectiveness in correcting possible matrix effects that were evident from the results obtained in the recovery studies. The recovery studies showed the Cr and Pb determinations to be adversely affected by internal standardization. An alternative approach for matrix effect correction, the common analyte internal standardization (CAIS) method was also investigated. This method held promise for allowing the use of aqueous standards, instead of oil or emulsion standards, for the calibration of the emulsified oil samples. Three different applications of the CAIS technique were investigated and all proved unsuccessful.
|
5 |
Investigation of two solid sample introduction techniques for the analysis of biological, environmental, and pharmaceutical samples by inductively coupled plasma spectrometryLam, Rebecca. January 2006 (has links)
In this thesis, new approaches to direct trace metals analysis of solid samples by inductively coupled plasma spectroscopy were investigated using laser ablation and thermal vaporization systems for solid sample introduction of biological, environmental, and pharmaceutical samples. / Laser ablation with inductively coupled plasma atomic emission spectroscopy (ICP-AES) and inductively coupled plasma mass spectrometry (ICP-MS) was applied to pharmaceutical tablets. Precision of analysis depended on laser parameters and could be improved using signal ratios. The feasibility of using laser ablation-ICP-MS for detecting natural levels of mercury along a single human hair strand was also demonstrated. / As well, the use of an induction-heating electrothermal vaporizer (IH-ETV) coupled to an ICP-MS was successful in determining mercury concentrations in a single human hair strand. Methodologies for multielement analysis of powdered hair were also explored using IH-ETV-ICP-MS. While calibration by reference hair materials showed promise, calibration methods by liquid standards were not suitable for any element. Detection limits achieved for most elements were below natural levels found in human hair. / IH-ETV-ICP-AES was also applied to the analysis of analyze-laden chromatographic powder. This study showed potential problems that may arise due to the methodology taken to analyze such materials. Finally, recommendations for future investigations and methodologies for laser ablation and thermal vaporization are discussed.
|
6 |
The Neolithic and late Iron Age Pottery from Pool, Sanday, Orkney : an archaeological and technological consideration of coarse pottery manufacture at the Neolithic and late Iron Age site of Pool, Orkney incorporating X-Ray Fluorescence, Inductively Coupled Plasma Spectrometric and Petrological AnalysesMacSween, Ann January 1990 (has links)
The Neolithic and late Iron Age pottery from the settlement site of Pool, Sanday, Orkney, was studied on two levels. Firstly, a morphological and technological study was carried out to establish a sequence for the site. Secondly an assessment was made of the usefulness of X-ray Fluorescence Analysis, Inductively Coupled Plasma Spectrometry and Petrological analysis to coarse ware studies, using the Pool assemblage as a case study. Recording of technological and typological attributes allowed three phases of Neolithic pottery to be identified. The earliest phase included sherds of Unstan Ware. This phase was followed by an assemblage characterised by pottery with incised decoration, which was stratified below a traditional Grooved Ware assemblage. The change in pottery styles and manufacturing methods with the Grooved Ware indicated that it evolved elsewhere. Grass tempered and burnished pottery characterised the Iron Age assemblage. Pottery samples from all phases of the site were analysed by XRF and ICPS. In addition, pottery from late Iron Age sites in the area was analysed for comparison with the Pool Iron Age pottery. XRF and ICPS analyses did not distinguish between either different phases at Pool or different Orcadian sites. This was attributed to the similarities in geological deposits over much of Orkney and the variations which can occur within a clay source. A clay survey was carried out in the vicinity of the site, and samples taken for comparison with the Pool pottery. Identification of rocks and minerals in thin section, and grain-size analysis, indicated that the Pool pottery was made locally to the site, and that both primary and secondary clays were used. It was concluded that petrological analysis is more suitable than elemental analysis in the study of coarse wares.
|
7 |
Investigation of mobility of trace elements in river sediments using ICP-OESBotes, Paul Johannes. January 2003 (has links)
Thesis (M. Sc.)--University of Pretoria, 2004. / Title from opening screen (viewed 12th March, 2005). Includes summary. Includes bibliographical references.
|
8 |
Chromium speciation analysis by ion chromatography coupled with ICP-OESJansen van Vuuren, Samantha 04 September 2012 (has links)
M.Sc. / The behaviour i.e. the distribution, bioavailability and toxicity of an element depends on the particular species in which it is present. That being said the prediction of the behaviour of species can therefore not be predicted by determination of the total concentration alone. Speciation analysis is thus an important process, which seeks to identify and quantify the species that occur in a sample. By identifying the species one is better equipped to predict the behaviour of the element if it were released into the ecosystem as well as if it were used in industrial processes. The speciation analysis of the dominant chromium species, Cr(III) and Cr(VI), has received much attention as these contradictory species are involved in many industrial processes such as plating and tanning for example. The species have opposing behaviour as Cr(III) is found to be a necessary micronutrient for mammals where as Cr(VI) is known to be toxic. Of the numerous methods developed for chromium speciation analysis, the on-line process of chromatographic preconcentration followed by simultaneous detection with a sensitive detector produces a synergistic effect for the successful speciation analysis of chromium. It was thus decided to study ion chromatography hyphenated with an ICP-OES as a means of studying chromium species. Anion chromatography coupled with ICP-OES was the basis for the development of the first method. Complexation of Cr(III) with EDTA to form a monovalent anion preceded its separation from Cr(VI) as the chromate anion. A carbonate-bicarbonate eluent was used to elute the species from a Dionex AG 9 guard column coupled with an AS 9 separation column. This method proved to be effective and fast, with each analysis taking less than two minutes. The second method was based on cation chromatography in the form of a Dionex CG12A guard column being coupled with an ICP-OES spectrometer as the detector. This method made use of a gradient elution program in which hexavalent chromium was eluted first with ammonium nitrate followed by trivalent chromium with nitric acid. This method was successfully applied to synthetic samples and was found to be effective.
|
9 |
Analysis of cobalt, tantalum, titanium, vanadium and chromium in tungsten carbide by inductively coupled plasma - optical emission spectrometry.Archer, Marcelle 23 May 2005 (has links)
Please read the abstract in the section 00front of this document / Dissertation (MSc (Chemistry))--University of Pretoria, 2007. / Chemistry / unrestricted
|
10 |
Investigation of two solid sample introduction techniques for the analysis of biological, environmental, and pharmaceutical samples by inductively coupled plasma spectrometryLam, Rebecca. January 2006 (has links)
No description available.
|
Page generated in 0.1441 seconds