Neste trabalho realizou-se um estudo espectroscópico vibracional do dissulfeto de carbono, CS2, puro e em misturas binárias com diferentes solventes moleculares, a fim de investigar as interações soluto/soluto e soluto/solvente. Os solventes utilizados para esse estudo foram diclorometano (CH2Cl2), clorofórmio (CHCl3), clorofórmio deuterado (CDCl3), benzeno (C6H6) e tetracloreto de carbono (CCl4); e as técnicas utilizadas foram as espectroscopias Raman e infravermelho (IV). A análise das bandas Raman do CS2 que formam o dubleto de Fermi (v1-2v2) permite determinar uma série de valores empíricos, chamados de parâmetros de ressonância de Fermi, dentre os quais, o coeficiente de acoplamento de Fermi (W) foi o mais utilizado neste trabalho. Os diferentes valores de W nos diferentes meios são consequência das forças das interações intermoleculares existentes entre CS2/CS2 e CS2/solvente. Os experimentos demonstraram que os valores de W em todas as misturas binárias investigadas aumentam à medida que a fração molar de CS2 diminui. Isto sugere que quando o CS2 é solvatado por diferentes moléculas, há um aumento da anarmonicidade, dependendo do tipo de interação. A análise da banda atribuída ao modo de deformação angular do CS2, v2, realizada a partir dos espectros no infravermelho sugere que em misturas binárias existem dois regimes de solvatação na solução, uma referente às interações CS2/ CS2, onde as moléculas de CS2 estão preferencialmente solvatadas por moléculas de CS2 e outro regime de solvatação referente às interações CS2/solvente, onde CS2 está solvatado por moléculas do solvente em questão. / In this work has performed a vibrational spectroscopic investigation of carbon disulphide, CS2, neat and in binary mixtures with different molecular solvents, aiming at understanding the solute/solute and solute/solvent interactions. The solvents considered for this study were dichloromethane (CH2Cl2), chloroform (CHCl3), deuterated chloroform (CDCl3), benzene (C6H6) and carbon tetrachloride (CCl4); and the techniques used were Raman and infrared (IR) spectroscopies. The analysis of the Raman bands that compose the Fermi doublet (v1-2v2) allows the determination of a series of empirical values, including the coefficient of Fermi coupling (W), used along this work. The different values of W within the different solvents are consequence of the intermolecular forces between CS2/CS2 and CS2/solvent. The experimental data showed that the W values in all investigated binary mixtures increase as the CS2 molar fraction decreases. It suggests that when CS2 is solvated by different molecules, there is an increase of the anarmonicity, depending on the type of the interaction. The analysis of the band assigned to the CS2 bending mode, v2, performed from infrared spectra, suggests that in the binary mixtures there are two solvation regimes in solution, one related to the CS2/CS2 interactions, where the CS2 molecule is preferentially solvated by CS2 molecules, and one where the CS2 is solvated by the respective solvent molecules.

Neste trabalho realizou-se um estudo espectroscópico vibracional do dissulfeto de carbono, CS2, puro e em misturas binárias com diferentes solventes moleculares, a fim de investigar as interações soluto/soluto e soluto/solvente. Os solventes utilizados para esse estudo foram diclorometano (CH2Cl2), clorofórmio (CHCl3), clorofórmio deuterado (CDCl3), benzeno (C6H6) e tetracloreto de carbono (CCl4); e as técnicas utilizadas foram as espectroscopias Raman e infravermelho (IV). A análise das bandas Raman do CS2 que formam o dubleto de Fermi (v1-2v2) permite determinar uma série de valores empíricos, chamados de parâmetros de ressonância de Fermi, dentre os quais, o coeficiente de acoplamento de Fermi (W) foi o mais utilizado neste trabalho. Os diferentes valores de W nos diferentes meios são consequência das forças das interações intermoleculares existentes entre CS2/CS2 e CS2/solvente. Os experimentos demonstraram que os valores de W em todas as misturas binárias investigadas aumentam à medida que a fração molar de CS2 diminui. Isto sugere que quando o CS2 é solvatado por diferentes moléculas, há um aumento da anarmonicidade, dependendo do tipo de interação. A análise da banda atribuída ao modo de deformação angular do CS2, v2, realizada a partir dos espectros no infravermelho sugere que em misturas binárias existem dois regimes de solvatação na solução, uma referente às interações CS2/ CS2, onde as moléculas de CS2 estão preferencialmente solvatadas por moléculas de CS2 e outro regime de solvatação referente às interações CS2/solvente, onde CS2 está solvatado por moléculas do solvente em questão. / In this work has performed a vibrational spectroscopic investigation of carbon disulphide, CS2, neat and in binary mixtures with different molecular solvents, aiming at understanding the solute/solute and solute/solvent interactions. The solvents considered for this study were dichloromethane (CH2Cl2), chloroform (CHCl3), deuterated chloroform (CDCl3), benzene (C6H6) and carbon tetrachloride (CCl4); and the techniques used were Raman and infrared (IR) spectroscopies. The analysis of the Raman bands that compose the Fermi doublet (v1-2v2) allows the determination of a series of empirical values, including the coefficient of Fermi coupling (W), used along this work. The different values of W within the different solvents are consequence of the intermolecular forces between CS2/CS2 and CS2/solvent. The experimental data showed that the W values in all investigated binary mixtures increase as the CS2 molar fraction decreases. It suggests that when CS2 is solvated by different molecules, there is an increase of the anarmonicity, depending on the type of the interaction. The analysis of the band assigned to the CS2 bending mode, v2, performed from infrared spectra, suggests that in the binary mixtures there are two solvation regimes in solution, one related to the CS2/CS2 interactions, where the CS2 molecule is preferentially solvated by CS2 molecules, and one where the CS2 is solvated by the respective solvent molecules.

L’engouement mondial pour les appareils nomades et la course à la sobriété énergétique font de la diminution de la taille des systèmes microélectroniques (MEMS) un enjeu majeur pour les prochaines années. Les micro batteries au lithium sont aujourd'hui le moyen le plus efficace pour stocker et alimenter des dispositifs avec une très forte densité énergétique. Les incorporer dans des cartes de crédit comportant un écran et des touches intégrés est l’un des défis que relèvent les multinationales comme ST Micro Electronics. Ces micro batteries contiennent cependant du lithium métallique qui peut s'avérer très dangereux quand il est en contact avec de l’eau ou de l’air humide. Ainsi, afin de protéger les composants à une exposition à l’humidité, une encapsulation de l’ensemble de la batterie est nécessaire. L'encapsulation polymère a l’avantage, comparativement à d’autres matériaux, de présenter un faible coût de mise en forme et un faible poids. Cependant, de tels systèmes d'encapsulation sont aujourd'hui insuffisants pour garantir une durée de vie de plusieurs années des composants car en présence d’humidité ou d’une variation de température importante la tenue mécanique des assemblages peut être fragilisée. L'objectif de la thèse est donc de réaliser et d'étudier le comportement mécanique et structural d’assemblage de couches minces de polymères et de métaux en température et en humidité. Deux types de polymères ont été choisis pour ce projet :1. Le chlorure de polyvinylidène (PVDC), un polymère commercial très utilisé pour ses bonnes propriétés barrières à l'eau 2. Un oligomère acrylate reticulable par voie thermique et UV synthétisé au sein de l'IMMM. / The increasing number of mobile devices and the race to energy sobriety make the decrease of the size of microelectronic systems (MEMS) a major challenge. Today, Lithium micro batteries are currently the best solution for high-power-and-energy applications. Incorporate them into credit cards containing a screen or associate them to electronic sensors for the supervision is the challenge which raises international companies such as ST Microelectronics. However, these micro batteries contain some lithium metal which can be dangerous if the metallic lithium is in contact with water or humid air. In addition, the substance can spontaneously ignite in the contact of the humidity. So, in order to avoid the problems of safety, we absolutely have to protect the lithium contained in our micro batteries using an encapsulation layer. Polymeric encapsulation has the advantage, compared with other materials (ceramic, metal), to present a moderate cost of shaping and a low weight. However, such systems of encapsulation are today insufficient to guarantee a satisfactory life cycle of components. Indeed, in the presence of humidity or of a too important temperature variation, the mechanical assemblies can be weakened and engender an irreparable break. The objective of the thesis is therefore to realize and study the mechanical and structural behavior of assembly of thin layers of polymers and metals in temperature and humidity.Two types of polymers were selected for this project:1. Polyvinylidene chloride (PVDC), a commercial polymer widely used for its good barrier properties to water.2. A thermally and UV-crosslinkable acrylate oligomer synthesized in the IMMM.