The process by which foods are browned during baking and roasting is attributed to the Maillard reaction. The interaction of the $ alpha$-hydroxycarbonyl moiety of a reducing sugar with an amino compound can result in a complex series of changes. The identification and isolation of the key intermediates, known as the Amadori rearrangement product (ARP) and Heyns rearrangement product (HRP), can provide a greater understanding of the browning process. / Fourier transform infrared (FTIR) analysis of 1-hydroxyacetane provided qualitative and quantitative information of the behavior of this $ alpha$-hydroxycarbonyl compound in various aqueous and non-aqueous solutions. / The carbonyl peaks (in the 1750-1700 $ rm cm sp{-1}$ absorption region) due to the keto and aldehydo forms of 1-hydroxyacetone (acetol) in the pure state and in deuterium oxide $ rm(D sb2O)$ were assigned. Upon addition of the acid-base catalysts (triethylamine, 5% NaOD and 5% DCl) additional peaks were detected in the alkene region (1700-1650 $ rm cm sp{-1})$ due to the formation of enediols by enolization. The examination of analogous hydroxycarbonyl structures (1-hydroxy-2-butanone, glyceraldehyde, glycoaldehyde and dihydroxyacetone) provided the means to confirm the assignments of the carbonyl and enediol bands. / The integrated intensity of the carbonyl peak of 1-hydroxyacetone centered at 1720 $ rm cm sp{-1}$ was determined for dilute solutions in $ rm D sb2O.$ The integrated molar absorptivity of the carbonyl band was calculated to be 3674 L/mol/cm. In addition, the effect of concentration and temperature on dimer dissociation was investigated. The effect of solvent and temperature on enolization was also studied. Time run analysis of the carbonyl-amine reaction of 1-hydroxyacetone with pyrrolidine provided the basis for a kinetic study of the rearrangement process in the early stage of Maillard reaction.

The application of Fourier transform infrared (FTIR) spectroscopy in the assessment of oil quality and stability and the determination of the degree and type (cis or trans) of unsaturation of fats and oils was investigated. FTIR spectroscopy was shown to provide a rapid means of monitoring changes in oils undergoing oxidation or subjected to thermal stress. Absorption bands associated with common primary and secondary oxidation products were identified by relating them to those of spectroscopically representative reference compounds, and a quantitative approach based on the use of oils spiked with these reference compounds as calibration standards was proposed. A sample-handling accessory based on a heated 25-mum transmission flow cell and heated input and output lines was developed to facilitate the rapid analysis of oils and premelted fats in their neat form. Using this system, an FTIR edible oil analysis package was developed to simultaneously analyze for trans content, cis content, iodine value (IV), and saponification number (SN) of neat fats and oils, using partial-least-squares (PLS) calibrations based on pure triglycerides. An automated transmission-based peak height method for isolated trans isomer determination using the characteristic trans absorption band at 967 cm -1 in the spectrum of a neat fat or oil, ratioed against the spectrum of a trans-free oil, was also developed. A subsequent validation study involving the analysis of more than 100 oil samples demonstrated concurrence between the trans data obtained by the PLS and peak height FTIR methods as well as between IV results obtained by FTIR analysis and gas chromatography. In addition, the internal consistency of the IV, cis, and trans FTIR predictions provided strong experimental evidence that the FTIR edible oil analysis package measures all three parameters accurately. A PLS-based IV/trans method was developed for a heated single-bounce horizontal attenuated total reflectance (SB-HATR) sample-

Three new quantitative Fourier transform infrared (FTIR) spectroscopic methods were developed to measure key lubricant condition monitoring parameters; total acid number (TAN), total base number (TBN), and moisture (H2O). All methods employ a common sample-handling accessory and are based on the addition of specific reagents designed to react stoichiometrically with target species in oils, with quantification being carried out using differential FTIR spectroscopy. The combined use of a stoichiometric reaction and differential spectroscopy overcomes the need for a reference oil, which has traditionally hindered quantitative analysis of lubricants by FTIR spectroscopy. Potassium hydroxide, trifluoroacetic acid (TFA) and 2,2-dimethoxypropane (DMP) were the stoichiometric reagents used to develop the FTIR TAN, TBN and H2 O methods, respectively. Calibrations were developed using either peak height measurements or partial least squares (PLS) regression and the methods were validated using standard addition techniques, as the ASTM (American Society of Testing and Materials) standard methods were not sufficiently reproducible to make valid comparisons. Validation of the methods indicated that the TAN, TBN and H2O methods had accuracies of +/-0.095 mg KOH/g, +/-0.5 mg KOH/g and +/-32ppm respectively and corresponding reproducibilities of +/-0.05 mg KOH/g, +/-0.17 mg KOH/g and +/-22 ppm. The TAN, TBN and H2O methods were implemented on a Continuous Oil Analysis and Treatment (COATRTM) System, integrating instrumentation, software and sample handling so as to provide packaged, user and environmentally friendly analytical methods that are alternatives to conventional ASTM wet chemical methods.

No description available.

Human hair is a relatively inert biopolymer and can survive through natural disasters. It is also found as trace evidence at crime scenes. Previous studies by FTIRMicrospectroscopy and – Attenuated Total Reflectance (ATR) successfully showed that hairs can be matched and discriminated on the basis of gender, race and hair treatment, when interpreted by chemometrics. However, these spectroscopic techniques are difficult to operate at- or on-field. On the other hand, some near infrared spectroscopic (NIRS) instruments equipped with an optical probe, are portable and thus, facilitate the on- or at –field measurements for potential application directly at a crime or disaster scene. This thesis is focused on bulk hair samples, which are free of their roots, and thus, independent of potential DNA contribution for identification. It explores the building of a profile of an individual with the use of the NIRS technique on the basis of information on gender, race and treated hair, i.e. variables which can match and discriminate individuals. The complex spectra collected may be compared and interpreted with the use of chemometrics. These methods can then be used as protocol for further investigations. Water is a common substance present at forensic scenes e.g. at home in a bath, in the swimming pool; it is also common outdoors in the sea, river, dam, puddles and especially during DVI incidents at the seashore after a tsunami. For this reason, the matching and discrimination of bulk hair samples after the water immersion treatment was also explored. Through this research, it was found that Near Infrared Spectroscopy, with the use of an optical probe, has successfully matched and discriminated bulk hair samples to build a profile for the possible application to a crime or disaster scene. Through the interpretation of Chemometrics, such characteristics included Gender and Race. A novel approach was to measure the spectra not only in the usual NIR range (4000 – 7500 cm-1) but also in the Visible NIR (7500 – 12800 cm-1). This proved to be particularly useful in exploring the discrimination of differently coloured hair, e.g. naturally coloured, bleached or dyed. The NIR region is sensitive to molecular vibrations of the hair fibre structure as well as that of the dyes and damage from bleaching. But the Visible NIR region preferentially responds to the natural colourants, the melanin, which involves electronic transitions. This approach was shown to provide improved discrimination between dyed and untreated hair. This thesis is an extensive study of the application of NIRS with the aid of chemometrics, for matching and discrimination of bulk human scalp hair. The work not only indicates the strong potential of this technique in this field but also breaks new ground with the exploration of the use of the NIR and Visible NIR ranges for spectral sampling. It also develops methods for measuring spectra from hair which has been immersed in different water media (sea, river and dam)

Thesis (Ph. D.)--University of Washington, 1988. / Vita. Includes bibliographical references.

Thesis (Ph. D.)--University of Hong Kong, 2008. / Also available in print.

Thesis (Ph.D.)--Texas Christian University, 2008. / Title from dissertation title page (viewed May 7, 2008). Includes abstract. Includes bibliographical references.

Thesis (Ph.D.)--Drexel University, 2008. / Includes abstract and vita. Includes bibliographical references (leaves 60-65).

Thesis (M. Sc.)--University of Canterbury, 2008. / Typescript (photocopy). Includes bibliographical references (leaves [71]-75). Also available via the World Wide Web.