Bio-derived polymers offer a sustainable alternative to petroleum-derived polymers. One such polymer, polylactide (PLA) is synthesised from the ring-opening polymerisation (ROP) of rac-lactide (rac-LA). The monomer contains two stereocentres which gives a range of tacticities. The isotactic ROP of rac-LA yields the most desirable polymer properties (physical and mechanical properties) and is quantified using a P_i (probability of isotactic enchainment) value. This thesis investigates tri- and tetradentate ligands coordinated to zinc(II), aluminium(III) and indium(III) to understand the ligand effects on both rate and isoselectivity. The first results chapter, Chapter 3, outlines the synthesis of a tetradentate salen ligand, its analogous phosphasalen ligand, where the imine bonds are replaced with iminophosphorane bonds and a hybrid ligand containing a mixture of both imine and iminophosphorane bonds. The salen, phosphasalen and hybrid ligands are coordinated to both aluminium and indium and used as initiators for the ROP. The indium hybrid initiator yields the highest isoselectivity (P_i = 0.71) which is significantly higher than its salen and phosphasalen analogues (P_i = 0.51 - 0.52) Chapter 4 investigates structure-activity relationships of the indium hybrid initiator, by modification of the ligand scaffold. Bulkier ortho-phenolate substituents do not affect rate or isoselectivity. Electron-withdrawing chloride substituents increase rate but decrease isoselectivity (P_i = 0.61). Modification of the phosphorus substituents yields the highest isoselectivity value (P_i = 0.75). It may be hypothesised that isoselectivity depends upon steric hindrance at both ortho-substituents and at phosphorus. Furthermore, the synthesis of a ferrocene containing indium hybrid complex is developed for future use in redox-switch catalysis. Chapter 5 describes the synthesis of two tridentate half-phosphasalen ligands and their coordination chemistry with zinc(II) and indium(III). Zinc initiators are active but display poor polymerisation control and low isoselectivity values (P_i = 0.67). Zinc complexes, with a less sterically encumbered ligand, preferentially form a homoleptic complex, which cannot be used in ROP. Indium initiators are slower than analogous half Schiff base initiators reported in the literature but show an improved isoselectivity value (P_i = 0.72).

A series of cationic Rh(I) diphosphine and phosphine-alkene complexes have been isolated and fully characterised. The reactivity of these species towards hydrogenation, dehydrogenation and dehydrocoupling reactions has been investigated. The use of potentially hemilabile ligands DPEphos and XANTphos in the intramolecular dehydrogenation chemistry of tricyclopentylphosphine is reported. The comparison in reactivity of these isolated diphosphine phosphine-alkene complexes towards hydrogenation and with acetonitrile is discussed along with their ability to dehydrocouple secondary silane, Ph₂SiH₂, and amine-borane H₃B·NMe₂H. The acceptorless dehydrogenation of a tethered cyclopentane with cationic Rh(I) diphosphine complexes has also been extended to include thioethers. Isolated cationic Rh(I) phosphine-alkene complexes with labile fluorobenzene ligands are found to act as a source of the reactive 12-electron [Rh{PR₂(ƞ²-C₅H₇)}]+ (R = cyclopentyl (Cyp)/ iPr) fragment in solution and can coordinate two amine-borane ligands (either H₃B·NMe₃, H₃B·NMe₂H or H₃B·NMeH₂) in a novel and unique bis-σ-binding mode. The catalytic activity of some of these isolated complexes in the dehydrocoupling of H₃B·NMe₂H and H₃B·NMeH₂ has been determined. With a view to further understanding the mechanism of catalytic transition metal assisted amine-borane dehydrogenation and dehydrocoupling, known B-N intermediates H₃B·NMe₂BH₂·NMe₂H and [H₂B·NMeH]₃ were also coordinated to the [Rh{PCyp₂(ƞ²-C₅H₇)}]+ fragment and investigated with regard to their role in the catalytic cycle. Structure activity relationships determined from stoichiometric reactions of cationic Rh(I) diphosphine fluorobenzene complexes with amine-boranes enabled the design of a highly efficient homogeneous catalyst capable of dehydrogenating H₃B·NMe₂H to [H₂BNMe₂]₂ at 0.2 mol% loading in 30 minutes at 298 K. Rapid dehydrogenation and dehydrocoupling of H₃B·NMeH₂ to form high molecular weight poly(N-methylaminoborane) with a low PDI has also been achieved. Investigations using model aminoborane H₂B=NiPr₂ and intermediate B-N species H₃B·NMe₂BH₂·NMe₂H and [H₂B·NMeH]₃ has helped establish an overall mechanistic rationale for this process.

This thesis explores the area of the intermolecular hydroacylation reaction, catalysed by rhodium diphosphine complexes. A range of latent low-coordinate rhodium diphosphine complexes have been synthesised, and their catalytic activity for the hydroacylation reaction has been investigated. In particular, emphasis has been placed on understanding how subtle changes in diphosphine steric properties affect, and can be used to control, selectivity of this catalysis. Chapter 2 presents investigations into rhodium complexes incorporating the potentially hemilabile P-O-P ligands: POP’, XANTphos and Xphos. The resulting complexes have been fully characterised and their activity for the catalytic intermolecular hydroacylation of aldehyde I (HCOC₂H₄SMe) and alkene II (H₂C=CHCO₂Me) established and compared to the DPEphos system. Further reactivity of Xphos for aromatic aldehyde V (HCOC₆H₄SMe) and alkene II, and aldehyde V and alkyne XI [HC≡CC₆H₃(CF₃)₂] has also been explored, and compared with the catalytic activity of {Rh(PPh₃)₂}⁺. Focus moved from potentially hemilabile ligands to chelating diphosphine ligands of the type PPh₂(CH₂)nPPh₂ (where n = 2-5), and then on to ortho-substituted bulky analogues of the type P(₀-C₆H₅R)₂(CH₂)₂P(₀-C₆H₅R)₂ (where R = Me and ⁱPr) complexed to rhodium. Chapter 3 outlines the complexes synthesised, and their activity for the catalytic intermolecular hydroacylation of aldehyde I and alkene II, aromatic aldehyde V and alkene II or aldehyde V and alkyne XI. Possible explanations for the observed switch in selectivity from alkene to aldehyde hydroacylation, and linear alkyne to branched alkyne hydroacylation, have been explored and are detailed. The final chapter concerns the structure of an interesting catalytic intermediate: the branched alkenyl species for the {Rh(DPEphos)}+ catalysed hydroacylation of aldehyde V and alkyne XI. Investigations into the kinetic and catalytic behaviour of this system were carried out, and a reaction scheme has been proposed which correlates well with kinetic modelling undertaken by Prof. Guy Lloyd-Jones of the University of Bristol.

This thesis is concerned with structure-reactivity relationships in metallocene chemistry. In particular new ansa-metallocenes of Groups 5-7 have been prepared. The structure and reactivity of these ansa-metallocenes is compared to the corresponding nonbridged metallocenes.

No description available.

This thesis describes the synthesis, characterisation and reactivity of diamide-amine and bis(cyclopentadienyl) supported Group 4 hydrazido(2-) compounds towards unsaturated molecules. The mechanisms of these transformations are probed using a range of structural, kinetic and computational methods.

Heterogeneous catalysts form a highly important part of everyday life, ranging from the production of fertiliser enabling the growth of crops that sustain much of the world's population to the production of synthetic fuels. They constitute a key part of the chemical industry and contribute towards substantial economic and environmental benefits. Heterogeneous catalysts are also believed to have an important role to play in a future hydrogen economy, reducing our requirements for fossil fuels. To this end, formic acid has been proposed as a potential hydrogen storage material for small portable devices. Additionally, formic acid has historically been used as a probe molecule to study catalyst materials and recent developments in the knowledge of its decomposition pathways and the preferred sites of these reactions, establish a good foundation for further study. This work explores a range of novel modification techniques that alter the activity of Pd nanoparticles to decompose formic acid to H₂ and CO₂. The methods used are the addition of polymers, attaching various functional groups to the surface of the catalyst support and decoration of nanoparticles with sub-monolayer coverages of another metal. Using a range of characterisation methods including FTIR of an adsorbed CO probe, XRD and XPS coupled with computational modelling, it is found that these methods result in some significant electronic and/or geometric alterations to the Pd nanoparticles. For polymer modification, the nature of the pendent group is highly important in determining the effects of the polymer on the Pd particles, with all the tested polymers resulting in varying degrees of electronic donation to the Pd surface. The geometric modifications caused by the polymers also varied with pendent groups; with amine containing pendent groups found to selectively block low coordinate sites, preventing the undesired dehydration of formic acid which results in poisoning of the Pd catalyst by the resulting CO. Attachment of amine groups to the surface of metal oxide catalyst supports, is demonstrated to result in dramatic electronic promotional effects to the supported Pd nanoparticles, and when an amine polymer is attached to the support surface the geometric modification is again observed. Finally decoration of Pd nanoparticles with a sub-monolayer coverage of a second metal is examined, resulting in some similar electronic and geometric effects on Pd nanoparticle surfaces to those observed with polymer modification with corresponding changes in formic acid decomposition activity. Overall, a number of methods are displayed to tune the catalytic activity and selectivity of Pd nanoparticles for formic acid decomposition, resulting in catalysts with some of the highest reported TOF's at room temperature. These modification methods are believed to be potentially applicable to a wide range of other catalytic reactions that operate under mild conditions.

This Thesis describes the synthesis and characterisation of new Main Group and Rare Earth alkyl, amide, alkoxide and borohydride complexes and their use as catalysts for the ring-opening polymerisation (ROP) of &epsilon;-caprolactone and rac-lactide. <strong>Chapter 1</strong> introduces ROP from an industrial and academic perspective, as well as polymer characterisation techniques. A literature review is given, with an emphasis placed on Main Group catalysts. <strong>Chapter 2</strong> describes the synthesis and characterisation of new homo- and hetero-scorpionate Main Group complexes. An introduction to homo- and hetero-scorpionate ligands is given, as well as a discussion of the ε-caprolactone and rac-lactide ROP activity displayed by the new complexes. <strong>Chapter 3</strong> describes the synthesis and characterisation of new neutral and cationic Main Group borohydride complexes supported by the tris(pyrazolyl)methane and tris(pyrazolyl)hydroborate ligands. A review of borohydride complexes is also given. The ε-caprolactone and rac-lactide ROP activity shown by the complexes presented is also discussed. <strong>Chapter 4</strong> describes the synthesis and characterisation of new mono- and di-cationic yttrium complexes supported by the tris(pyrazolyl)methane and triazacyclononane ligands. An introduction to the synthesis of neutral and cationic Rare Earth complexes is given. An overview of immortal ROP is also provided. The activity of the new complexes towards the immortal ROP of rac-lactide is also discussed. <strong>Chapter 5</strong> contains experimental details and characterising data for the new complexes reported in this thesis. CD Appendix</strong> contains .cif files for all of the new crystallographically characterised complexes.