Desde seu lançamento, em 2002, a Norma IEC 61850 vem evoluindo para se tornar o padrão adotado nos Sistemas de Automação de Subestações. Dentre seus vários aspectos, destacam- se os serviços de tempo real, que permitem a implementação de funções de automação e de proteção dentro da subestação através da troca de mensagens específicas entre Dispositivos Eletrônicos Inteligentes através de um barramento digital de rede de dados. O objetivo central deste trabalho é explorar algumas das questões que envolvem a implementação de uma classe de serviços de tempo real: a transmissão de valores amostrados através de Serviços SMV, definidos pela Norma IEC 61850-9. Primeiramente, apresenta-se um breve resumo das principais características da Norma IEC 61850 que possibilitam o atendimento dos três requisitos por ela estabelecidos como base: a interoperabilidade entre dispositivos de diferentes fabricantes, a versatilidade na configuração e reconfiguração do Sistema de Automação da Subestação, e a possibilidade de implementação de novas tecnologias. Em seguida, explora-se com maior profundidade todos os aspectos relevantes à implementação dos Serviços SMV. Devido à complexidade deste assunto, o autor propõe abordá-lo sob a ótica de cinco tópicos interdependentes: variações da Norma IEC 61850-9, confiabilidade do barramento de processo, sincronismo de tempo, análise da qualidade da medição e segurança cibernética. Com base nos resultados apresentados neste estudo, propõem-se duas plataformas, um protótipo de Transformador de Potencial Óptico e um protótipo de Relé de Proteção Diferencial para transformadores de potência, com o objetivo de explorar alguns dos aspectos pertinentes à implementação de um barramento de processo de acordo com a Norma IEC 61850-9. Também foram realizados testes de geração e transmissão de mensagens contendo valores de amostras de tensão/corrente do sistema elétrico (denominadas de SV Messages) com a finalidade de implementá-las de fato e avaliar as ferramentas de mercado disponíveis. Por fim foi proposto um modelo para a simulação do sistema de potência em conjunto com a rede de comunicação utilizando o programa Matlab/Simulink. O autor espera que este trabalho contribua para esclarecer os vários conceitos envolvidos na implementação do barramento de processo definido pela Norma IEC 61850-9, auxiliando na pesquisa e no desenvolvimento de novas ferramentas e dispositivos, e no aprimoramento da Norma IEC 61850. / Since its introduction, in 2002, the IEC 61850 Standard has been evolved to become the standard adopted in Substation Automation Systems. Among its various aspects it can be highlighted the real-time services, which allows the implementation of automation and protection functions within the substation by exchanging specific messages between Intelligent Electronic Devices via a digital data bus network. The main objective of this text is to explore some issues about the implementation of one class of real-time services: the transmission of sampled values through SMV Services, defined by IEC 61850-9 Standard. First, it is presented a brief summary of the main features of IEC 61850 Standard which allows it to meet the three main requirements on this standard: interoperability between devices from different manufacturers, versatility in configuration and reconfiguration of Substation Automation System, and possibility of implementation of new technologies. Next, it is explored, with more details, all aspects involved in the implementation of SMV Services. Due to the complexity of this subject, the author proposes approaches it from the perspective of five interdependent topics: variations of IEC 61850-9 Standard, process bus reliability, time synchronism, analysis of measurement quality, and cyber security. Based on results presented two platforms are proposed, an Optical Voltage Transformer prototype and a Differential Protection Relay prototype for power transformers, in order to explore some of aspects related to the implementation of a process bus according to IEC 61850-9 Standard. It was executed also some tests of generation and transmission of messages containing samples values of voltage/current from power system (referred as SV Messages) in order to implement them in fact, and to evaluate available market tools. At the end it is propoused a model for simulation of power system and network communication using Matlab/Simulink software. The author hopes this work may contribute to clarify the various concepts involved in the implementation of a process bus according to IEC 61850-9 Standard, aiding in research and development of new tools and devices, and improvement of IEC 61850 Standard.

This thesis deals with the description, analysis, calculation, production and testing of current instrument transformer. It is a measuring current transformer in one turn primary winding with 2500/1 A transfer. This project includes theory, analysis, numerical calculation, thermal simulation and partial type test of the measuring current transformer. This transformer is developing in cooperation with KPB Intra s.r.o. KPB Intra is engaged in the development and production of instrument transformers.

This diploma thesis deals with the fundamental properties of epoxide mixtures, as determining of these fundamental properties of epoxide mixtures could in the case of favorable results lead to diminishing the amount of defects in epoxide-embedded instrument transformers. As the influence of effects in the manufacturing process of transformers causing poor quality is very extensit, the biggest emphasis is laid capitally on the influence of the epoxide casting mixture composition. The thesis describes the manufacture technology including used methodics and materials. The compositions of epoxide resins and the mechanisms of their curing. Also, the definitions of fundamental properties of dielectric materials and the description of diagnostic methods used to relative permitivity, dissipation factor and inner resistivity are included. suitable casts of acquired samples were set and dried out within the experimental part, followed by measurement of fundamental electrical properties in temperature and frequency relations. Hereafter a comparison of individual samples and the evaluation of their electrical properties will be carried out.

The function analysis of instrument voltage transformer with the aid of his equivalent diagram and his phasor diagrams is main part of my masters thesis. I solve the influence and errors of his equivalent diagram’s elements on this instrument voltage transformer. Than I talk about suitable magnetic materials using for instrument voltage transformers. There are 3D pictures which show lay-out of instrument voltage transformers’s windings and his magnetic circuit.