Spelling suggestions: "subject:"insulating materials -- moisture"" "subject:"insulating materials -- amoisture""
1 |
Experimental determination of the flow parameters involved in moisture migration through fiberglass insulation materialsWeekes, Dean M. January 1983 (has links)
An experimental investigation was made to determine the role of gravitational and surface tension forces in the migration of liquid water through fiberglass insulation materials. Straightforward experimental procedures were devised to effectively isolate and quantify flow parameters considered important in describing the flow mechanisms involved. The study was conducted to supplement an earlier investigation into the thermal performance of wetted insulation materials.
Darcy's Law was found to apply for the regime of flow encountered in which liquid water flows under the force of its own weight in horizontal rooftop insulation. Experimental determination of the constant of proportionality in Darcy's Law, the hydraulic conductivity, is all that is needed to describe the migration of liquid water in saturated fiberglass insulation.
Capillary forces, originally thought to play a significant role in the movement of liquid water through fiberglass insulation, were found to be negligible. Capillary rise up a column of insulation measured no higher than 13 mm. / M.S.
|
2 |
An experimental and analytical investigation of liquid moisture distribution in roof insulating systemsWoodbury, Keith Auburn January 1984 (has links)
An experimental investigation was carried out to determine the feasibility of using thermal conductivity measurements to detect moisture concentrations in a highly porous glass fiber insulation. A new technique employing thermistor probes was used to measure thermal conductivity over a range of low moisture contents.
The results indicate that the material's thermal conductivity is a strong nonlinear function of the moisture concentration. The sensitivity of the moisture content to thermal conductivity is greatest for moisture contents less than 25 per cent for the material tested.
A numerical procedure for predicting the temperature and moisture distributions in a highly porous material is detailed. / Ph. D.
|
Page generated in 0.143 seconds