Spelling suggestions: "subject:"intensity modulated"" "subject:"intensity nodulated""
1 |
A clinical comparison and analysis between conventional MLC based and solid compensator based IMRT treatment techniques [electronic resource] /Khadija, Murshed. January 2009 (has links)
Thesis (M.S.)--University of Toledo, 2009. / "In partial fulfillment of the requirements for the degree of Master of Science in Biomedical Sciences." Title from title page of PDF document. Bibliography: p. 34-35.
|
2 |
Comparison of IMRT delivery methods a thesis /Markovic, Miljenko. January 2008 (has links)
Thesis (M.S.) --University of Texas Graduate School of Biomedical Sciences at San Antonio, 2008. / Vita. Includes bibliographical references.
|
3 |
Reducing Complexity of Liver Cancer Intensity Modulated RadiotherapyLee, Mark Tiong Yew 15 February 2010 (has links)
Intensity modulated radiotherapy (IMRT) can potentially increase the dose delivered to liver tumours while sparing normal tissues from dose. More complex IMRT, with more modulation of the radiation beam is more susceptible to geometric and dosimetric uncertainties than simpler radiotherapy plans. Simple breath-hold liver IMRT using few radiation beam segments (<30) was investigated in 27 patients to determine the quality of treatment in terms of tumour dose coverage and normal tissue sparing as compared to index IMRT using >30 segments. In all 27 plans number of segments was reduced to <30 without compromising tumour coverage or normal tissue dose constraints, at the expense of dose conformity. Delivered tumour and normal tissue dose did not differ statistically between IMRT plans when accounting for treatment residual geometric error. This research supports considering the use of simple IMRT for treatment of liver cancer, except when loss of dose conformation is undesirable (i.e. very high doses).
|
4 |
Investigations into static multileaf collimator based intensity modulated radiotherapyWilliams, Matthew John, Physics, Faculty of Science, UNSW January 2005 (has links)
Intensity Modulated Radiation Therapy (IMRT) is a modern radiotherapy treatment technique used to obtain highly conformal dose distributions. The delivery of IMRT is commonly achieved through the use of a multileaf collimator (MLC). One of the hindrances at present to the widespread use of IMRT is the increased time required for its planning, delivery and verification. In this thesis one particular method of MLC based IMRT, known as Static Multileaf Collimator based IMRT (SMLC-IMRT), has been studied along with methods for improving it???s delivery efficiency. The properties of an MLC commonly used in SMLC-IMRT have been characterised. The potential ramifications of these properties on the dosimetric accuracy of the delivered IMRT field were also investigated. An Interactive Leaf Sequencing (ILS) program was developed that allowed for the manipulation and processing of intensity maps using a variety of methods. The objective of each method was to improve the delivery efficiency whilst maintaining the dosimetric quality of the IMRT treatment. The different methods investigated were collimator angle optimisation, filtration, and intensity level optimisation. The collimator was optimised by identifying the angle at which the minimum monitor unit???s (MU???s) were required when using a sliding-window delivery method. A Savitzky-Golay filter was applied to random intensity maps and suitable filtration parameters identified for filtering clinical IMRT fields, and the intensity levels were optimised based on a deviation threshold. The deviation threshold identified the acceptable level of difference tolerable between the original and modified intensity map. Several IMRT cases were investigated and the impact of each the methods on MU???s, segments and dose distribution observed. As the complexity of IMRT fields increases the dosimetric impact of the MLC properties increases. Complex SMLC-IMRT fields require longer delivery times due to the increased number of MU???s and segments. Collimator optimisation was shown to be a fast and effective means of improving delivery efficiency with negligible dosimetric change to the optimised plan. Modifying intensity maps by applying a filter and optimising the intensity levels did reduce the complexity and improve the delivery efficiency, but also required a dosimetric compromise of the optimised plan.
|
5 |
Direct optimization of 3D dose distributions using collimator rotationMilette, Marie-Pierre 05 1900 (has links)
The primary goal of this thesis is to improve the precision and efficiency of radiation therapy treatment. This goal is achieved by developing and implementing a direct aperture optimization (DAO) platform where the multileaf collimator (MLC) is rotated between each aperture. The approach is referred to as rotating aperture optimization (RAO).
A series of tests is performed to evaluate how a final optimized plan depends on MLC parameters. Imposing constraints on the leaf
sequence results in increased efficiency and a simplification of the treatment plan without compromising the quality of the dose
distribution. It is also shown that an arrangement of equispaced collimator angles takes full advantage of the flexibility associated with collimator rotation.
A study including ten recurring nasopharynx cancer patients is used to evaluate the capabilities of RAO compared to other optimization techniques. It is shown that RAO plans require significantly less
linac radiation output (monitor units or MU) while maintaining equivalent dose distribution quality compared to plans generated with the conventional fluence based approach. Furthermore with an
improved collimator rotation speed, the RAO plans should be executable in the same or less time than plans generated with the
fluence-based approach. For the second part of the study it is shown that plans generated with RAO are as good as or better than plans generated with standard fixed collimator DAO. Film and ion chamber
measurements indicate that RAO plans can be delivered more accurately than DAO plans.
Additional applications of DAO were investigated through collaboration with two PhD students. First, Monte Carlo was used to
generate pencil beam dose distributions for DAO inverse treatment planning (MC-DAO). The MC-DAO technique correctly models
traditionally difficult treatment geometries such as small fields and tissue inhomogeneities. The MC-DAO also takes advantage of the improved MU efficiency associated with the DAO technique. Secondly
DAO is proposed for adaptive radiation therapy. The results show that plan re-adaptation can be performed more quickly than complete plan regeneration thereby minimizing the time the patient has to
spend in the treatment room and reducing the potential for geometric errors in treatment delivery.
|
6 |
Direct optimization of 3D dose distributions using collimator rotationMilette, Marie-Pierre 05 1900 (has links)
The primary goal of this thesis is to improve the precision and efficiency of radiation therapy treatment. This goal is achieved by developing and implementing a direct aperture optimization (DAO) platform where the multileaf collimator (MLC) is rotated between each aperture. The approach is referred to as rotating aperture optimization (RAO).
A series of tests is performed to evaluate how a final optimized plan depends on MLC parameters. Imposing constraints on the leaf
sequence results in increased efficiency and a simplification of the treatment plan without compromising the quality of the dose
distribution. It is also shown that an arrangement of equispaced collimator angles takes full advantage of the flexibility associated with collimator rotation.
A study including ten recurring nasopharynx cancer patients is used to evaluate the capabilities of RAO compared to other optimization techniques. It is shown that RAO plans require significantly less
linac radiation output (monitor units or MU) while maintaining equivalent dose distribution quality compared to plans generated with the conventional fluence based approach. Furthermore with an
improved collimator rotation speed, the RAO plans should be executable in the same or less time than plans generated with the
fluence-based approach. For the second part of the study it is shown that plans generated with RAO are as good as or better than plans generated with standard fixed collimator DAO. Film and ion chamber
measurements indicate that RAO plans can be delivered more accurately than DAO plans.
Additional applications of DAO were investigated through collaboration with two PhD students. First, Monte Carlo was used to
generate pencil beam dose distributions for DAO inverse treatment planning (MC-DAO). The MC-DAO technique correctly models
traditionally difficult treatment geometries such as small fields and tissue inhomogeneities. The MC-DAO also takes advantage of the improved MU efficiency associated with the DAO technique. Secondly
DAO is proposed for adaptive radiation therapy. The results show that plan re-adaptation can be performed more quickly than complete plan regeneration thereby minimizing the time the patient has to
spend in the treatment room and reducing the potential for geometric errors in treatment delivery.
|
7 |
Reducing Complexity of Liver Cancer Intensity Modulated RadiotherapyLee, Mark Tiong Yew 15 February 2010 (has links)
Intensity modulated radiotherapy (IMRT) can potentially increase the dose delivered to liver tumours while sparing normal tissues from dose. More complex IMRT, with more modulation of the radiation beam is more susceptible to geometric and dosimetric uncertainties than simpler radiotherapy plans. Simple breath-hold liver IMRT using few radiation beam segments (<30) was investigated in 27 patients to determine the quality of treatment in terms of tumour dose coverage and normal tissue sparing as compared to index IMRT using >30 segments. In all 27 plans number of segments was reduced to <30 without compromising tumour coverage or normal tissue dose constraints, at the expense of dose conformity. Delivered tumour and normal tissue dose did not differ statistically between IMRT plans when accounting for treatment residual geometric error. This research supports considering the use of simple IMRT for treatment of liver cancer, except when loss of dose conformation is undesirable (i.e. very high doses).
|
8 |
Investigations into static multileaf collimator based intensity modulated radiotherapyWilliams, Matthew John, Physics, Faculty of Science, UNSW January 2005 (has links)
Intensity Modulated Radiation Therapy (IMRT) is a modern radiotherapy treatment technique used to obtain highly conformal dose distributions. The delivery of IMRT is commonly achieved through the use of a multileaf collimator (MLC). One of the hindrances at present to the widespread use of IMRT is the increased time required for its planning, delivery and verification. In this thesis one particular method of MLC based IMRT, known as Static Multileaf Collimator based IMRT (SMLC-IMRT), has been studied along with methods for improving it???s delivery efficiency. The properties of an MLC commonly used in SMLC-IMRT have been characterised. The potential ramifications of these properties on the dosimetric accuracy of the delivered IMRT field were also investigated. An Interactive Leaf Sequencing (ILS) program was developed that allowed for the manipulation and processing of intensity maps using a variety of methods. The objective of each method was to improve the delivery efficiency whilst maintaining the dosimetric quality of the IMRT treatment. The different methods investigated were collimator angle optimisation, filtration, and intensity level optimisation. The collimator was optimised by identifying the angle at which the minimum monitor unit???s (MU???s) were required when using a sliding-window delivery method. A Savitzky-Golay filter was applied to random intensity maps and suitable filtration parameters identified for filtering clinical IMRT fields, and the intensity levels were optimised based on a deviation threshold. The deviation threshold identified the acceptable level of difference tolerable between the original and modified intensity map. Several IMRT cases were investigated and the impact of each the methods on MU???s, segments and dose distribution observed. As the complexity of IMRT fields increases the dosimetric impact of the MLC properties increases. Complex SMLC-IMRT fields require longer delivery times due to the increased number of MU???s and segments. Collimator optimisation was shown to be a fast and effective means of improving delivery efficiency with negligible dosimetric change to the optimised plan. Modifying intensity maps by applying a filter and optimising the intensity levels did reduce the complexity and improve the delivery efficiency, but also required a dosimetric compromise of the optimised plan.
|
9 |
Comparative treatment planning in radiotherapy and clinical impact of proton relative biological effectiveness /Johansson, Jonas, January 2006 (has links)
Diss. (sammanfattning) Uppsala : Uppsala universitet, 2006. / Härtill 4 uppsatser.
|
10 |
Direct optimization of 3D dose distributions using collimator rotationMilette, Marie-Pierre 05 1900 (has links)
The primary goal of this thesis is to improve the precision and efficiency of radiation therapy treatment. This goal is achieved by developing and implementing a direct aperture optimization (DAO) platform where the multileaf collimator (MLC) is rotated between each aperture. The approach is referred to as rotating aperture optimization (RAO).
A series of tests is performed to evaluate how a final optimized plan depends on MLC parameters. Imposing constraints on the leaf
sequence results in increased efficiency and a simplification of the treatment plan without compromising the quality of the dose
distribution. It is also shown that an arrangement of equispaced collimator angles takes full advantage of the flexibility associated with collimator rotation.
A study including ten recurring nasopharynx cancer patients is used to evaluate the capabilities of RAO compared to other optimization techniques. It is shown that RAO plans require significantly less
linac radiation output (monitor units or MU) while maintaining equivalent dose distribution quality compared to plans generated with the conventional fluence based approach. Furthermore with an
improved collimator rotation speed, the RAO plans should be executable in the same or less time than plans generated with the
fluence-based approach. For the second part of the study it is shown that plans generated with RAO are as good as or better than plans generated with standard fixed collimator DAO. Film and ion chamber
measurements indicate that RAO plans can be delivered more accurately than DAO plans.
Additional applications of DAO were investigated through collaboration with two PhD students. First, Monte Carlo was used to
generate pencil beam dose distributions for DAO inverse treatment planning (MC-DAO). The MC-DAO technique correctly models
traditionally difficult treatment geometries such as small fields and tissue inhomogeneities. The MC-DAO also takes advantage of the improved MU efficiency associated with the DAO technique. Secondly
DAO is proposed for adaptive radiation therapy. The results show that plan re-adaptation can be performed more quickly than complete plan regeneration thereby minimizing the time the patient has to
spend in the treatment room and reducing the potential for geometric errors in treatment delivery. / Science, Faculty of / Physics and Astronomy, Department of / Graduate
|
Page generated in 0.0588 seconds