Spelling suggestions: "subject:"enternal combustion have motor"" "subject:"enternal combustion have rotor""
1 |
Numerical modelling of pressure rise combustion for reducing emissions of future civil aircraftMaterano Blanco, Gilberto Ignacio January 2014 (has links)
This work assesses the feasibility of designing and implementing the wave rotor (WR), the pulse detonation engine (PDE) and the internal combustion wave rotor (ICWR) as part of novel Brayton cycles able to reduce emissions of future aircraft. The design and evaluation processes are performed using the simplified analytical solution of the devices as well as 1D-CFD models. A code based on the finite volume method is built to predict the position and dimensions of the slots for the WR and ICWR. The mass and momentum equations are coupled through a modified SIMPLE algorithm to model compressible flow. The code includes a novel tracking technique to ensure the global mass balance. A code based on the method of characteristics is built to predict the profiles of temperature, pressure and velocity at the discharge of the PDE and the effect of the PDEs array when it operates as combustion chamber of gas turbines. The detonation is modelled by using the NASA-CEA code as a subroutine whilst the method of characteristics incorporates a model to capture the throttling and non-throttling conditions obtained at the PDE's open end during the transient process. A medium-sized engine for business jets is selected to perform the evaluation that includes parameters such as specific thrust, specific fuel consumption and efficiency of energy conversion. The ICWR offers the best performance followed by the PDE; both options operate with a low specific fuel consumption and higher specific thrust. The detonation in an ICWR does not require an external source of energy, but the PDE array designed is simple. The WR produced an increase in the turbine performance, but not as high as the other two devices. These results enable the statement that a pressure rise combustion process behaves better than pressure exchangers for this size of gas turbine. Further attention must be given to the NOx emission, since the detonation process is able to cause temperatures above 2000 K while dilution air could be an important source of oxygen.
|
2 |
Numerical modelling of pressure rise combustion for reducing emissions of future civil aircraftMaterano Blanco, Gilberto Ignacio 04 1900 (has links)
This work assesses the feasibility of designing and implementing the wave rotor
(WR), the pulse detonation engine (PDE) and the internal combustion wave
rotor (ICWR) as part of novel Brayton cycles able to reduce emissions of future
aircraft. The design and evaluation processes are performed using the
simplified analytical solution of the devices as well as 1D-CFD models. A code
based on the finite volume method is built to predict the position and
dimensions of the slots for the WR and ICWR. The mass and momentum
equations are coupled through a modified SIMPLE algorithm to model
compressible flow. The code includes a novel tracking technique to ensure the
global mass balance. A code based on the method of characteristics is built to
predict the profiles of temperature, pressure and velocity at the discharge of the
PDE and the effect of the PDEs array when it operates as combustion chamber
of gas turbines. The detonation is modelled by using the NASA-CEA code as a
subroutine whilst the method of characteristics incorporates a model to capture
the throttling and non-throttling conditions obtained at the PDE's open end
during the transient process. A medium-sized engine for business jets is
selected to perform the evaluation that includes parameters such as specific
thrust, specific fuel consumption and efficiency of energy conversion. The ICWR
offers the best performance followed by the PDE; both options operate with a
low specific fuel consumption and higher specific thrust. The detonation in an
ICWR does not require an external source of energy, but the PDE array
designed is simple. The WR produced an increase in the turbine performance,
but not as high as the other two devices. These results enable the statement
that a pressure rise combustion process behaves better than pressure
exchangers for this size of gas turbine. Further attention must be given to the
NOx emission, since the detonation process is able to cause temperatures
above 2000 K while dilution air could be an important source of oxygen.
|
Page generated in 0.1477 seconds