The Digisonde Portable Sounder (DPS) is a low power pulse ionosonde capable of recording a wealth of scientific information about the ionosphere. The routine vertical incidence mode, that produces the scaled ionospheric parameters, only records limited Doppler and no precise angle of arrival (AoA) information. The drift mode produces precise scientific information but only limited range information. This thesis explains the operation of the DPS and then examines the drift data by first showing the Doppler velocities (V*) calculated for a fixed frequency ionogram as well as the velocities calculated from an interesting ionospheric disturbance measured with a stepped frequency ionogram and second by illustrating the presence of a variation in the AoA of ionospheric echoes at sunrise. The conclusion of the thesis is that a drift vertical incidence mode be developed to allow the simultaneous measurement of the scaled ionospheric parameters and the precise AoA and full Doppler spectrum information.

This thesis describes the theoretical development of a new ionospheric sounding system. The different types of ionosonde, their prime objectives, and their relative merits and demerits are discussed. The various types of code and their correlation functions are described. The essential requirements of the new system are listed, and suitable codes are found for it. Computer calculations and mathematical derivations demonstrate the (theoretical) suitability of these codes under all conditions. Essentials of the mode of operation of the system and details of its design are specified, and computer simulations are used to examine relevant aspects of its operation. Finally, since the construction of the system is not complete and results cannot therefore be presented, the present state of construction of the system is described

From the requirements of the Ionosonde digitisation project, undertaken by Rhodes University Antarctic Research Group, it was decided to use the Fast Fourier Transform to compute the spectrum analysis. Several FFT algorithms are reviewed and properties discussed, and the Ccoley Tukey algorithm chosen for utilization. The hardware implementation of this algorithm, and the microprogram control of the whole system are discussed in detail, and such design aspects that required computer simulation are also treated in detail. The final testing of the analyser is shown, and includes a test using data from an ionosonde sounding. The conclusions contain details of extensions to the analysers present operation, required by plans to place the whole Chirpsounder under microprocessor control

This thesis describes the interfacing of an IBM compatible microcomputer to a BR Communications chirp sounder. The need for this is twofold: Firstly for control of the sounder including automatic scheduling of operations, and secondly for data capture. A signal processing card inside the computer performs a Fast Fourier Transform on the sampled data from two phase matched receivers. The transformed data is then transferred to the host computer for further processing, display and storage on hard disk or magnetic tape, all in real time. Critical timing functions are provided by another card in the microcomputer, the timing controller. Built by the author, the design and operation of this sub-system is discussed in detail. Additional circuitry is required to perform antenna and filter switching, and a possible design thereof is also presented by the author. The completed system, comprising the chirp sounder, the PC environment, and the signal switching circuitry, has a dual purpose. It can operate as either a meteor radar, using a fixed frequency (currently 27,99 MHz), or as an advanced chirp ionosonde allowing frequency sweeps from 1,6 to 30 MHz. In the latter case fixed frequency doppler soundings are also possible. Examples of data recorded in the various modes are given.

No description available.

Thesis (Ph.D. (Physics & Electronics)) - Rhodes University, 2008.

This thesis presents research pertaining to the development of an African Ionospheric Map (AIM). An ionospheric map is a computer program that is able to display spatial and temporal representations of ionospheric parameters such as, electron density and critical plasma frequencies, for every geographical location on the map. The purpose of this development was to make the most optimum use of all available data sources, namely ionosondes, satellites and models, and to implement error minimisation techniques in order to obtain the best result at any given location on the African continent. The focus was placed on the accurate estimation of three upper atmosphere parameters which are important for radio communications: critical frequency of the F2 layer (foF2), Total Electron Content (TEC) and the maximum usable frequency over a distance of 3000 km (M3000F2). The results show that AIM provided a more accurate estimation of the three parameters than the internationally recognised and recommended ionosphere model (IRI-2012) when used on its own. Therefore, the AIM is a more accurate solution than single independent data sources for applications requiring ionospheric mapping over the African continent.

This thesis presents an update to the ionospheric propagation factor, M(3000)F2, global empirical model developed by Oyeyemi et al. (2007) (NNO). An additional aim of this research was to produce the updated model in a form that could be used within the International Reference Ionosphere (IRI) global model without adding to the complexity of the IRI. M(3000)F2 is the highest frequency at which a radio signal can be received over a distance of 3000 km after reflection in the ionosphere. The study employed the artificial neural network (ANN) technique using relevant geophysical input parameters which are known to influence the M(3000)F2 parameter. Ionosonde data from 135 ionospheric stations globally, including a number of equatorial stations, were available for this work. M(3000)F2 hourly values from 1976 to 2008, spanning all periods of low and high solar activity were used for model development and verification. A preliminary investigation was first carried out using a relatively small dataset to determine the appropriate input parameters for global M(3000)F2 parameter modelling. Inputs representing diurnal variation, seasonal variation, solar variation, modified dip latitude, longitude and latitude were found to be the optimum parameters for modelling the diurnal and seasonal variations of the M(3000)F2 parameter both on a temporal and spatial basis. The outcome of the preliminary study was applied to the overall dataset to develop a comprehensive ANN M(3000)F2 model which displays a remarkable improvement over the NNO model as well as the IRI version. The model shows 7.11% and 3.85% improvement over the NNO model as well as 13.04% and 10.05% over the IRI M(3000)F2 model, around high and low solar activity periods respectively. A comparison of the diurnal structure of the ANN and the IRI predicted values reveal that the ANN model is more effective in representing the diurnal structure of the M(3000)F2 values than the IRI M(3000)F2 model. The capability of the ANN model in reproducing the seasonal variation pattern of the M(3000)F2 values at 00h00UT, 06h00UT, 12h00UT, and l8h00UT more appropriately than the IRI version is illustrated in this work. A significant result obtained in this study is the ability of the ANN model in improving the post-sunset predicted values of the M(3000)F2 parameter which is known to be problematic to the IRI M(3000)F2 model in the low-latitude and the equatorial regions. The final M(3000)F2 model provides for an improved equatorial prediction and a simplified input space that allows for easy incorporation into the IRI model.

The South African Global Navigation Satellite System (GNSS) network of dual frequency receivers provide an opportunity to investigate solar cycle effects on ionospheric Total Electron Content (TEC) over the South Africa region by taking advantage of the dispersive nature of the ionospheric medium. For this task, the global University of New Brunswick Ionospheric Modelling Technique (UNB-IMT) was adopted, modified and applied to compute TEC using data from the southern African GNSS Network. TEC values were compared with CODE International GNSS services TEC predictions and Ionosonde-derived TEC (ITEC) measurements to test and validate the UNB-IMT results over South Africa. It was found that the variation trends of GTEC and ITEC over all stations are in good agreement and show pronounced seasonal variations with high TEC values around equinoxes for a year near solar maximum and less pronounced around solar minimum. Signature TEC depletions and enhanced spikes were prevalently evident around equinoxes, particularly for a year near solar maximum. These observations were investigated and further discussed with an analysis of the midday Disturbance Storm Time (DST) index of geomagnetic activity. The residual GTEC – ITEC corresponding to plasmaspheric electron content and equivalent ionospheric foF2 and total slab thickness parameters were computed and comprehensively discussed. The results verified the use of UNB-IMT as one of the tools for ionospheric research over South Africa. The UNB-IMT algorithm was applied to investigate TEC variability during different epochs of solar cycle 23. The results were investigated and further discussed by analyzing the GOES 8 and 10 satellites X-ray flux (0.1 – 0.8 nm) and SOHO Solar Extreme Ultraviolet Monitor higher resolution data. Comparison of UNB-IMT TEC derived from collocated HRAO and HARB GNSS receivers was undertaken for the solar X17 and X9 flare events, which occurred on day 301, 2003 and day 339, 2006. It was found that there exist considerable TEC differences between the two collocated receivers with some evidence of solar cycle dependence. Furthermore, the daytime UNB TEC compared with the International Reference Ionosphere 2001 predicted TEC found both models to show a good agreement. The UNB-IMT TEC was further applied to investigate the capabilities of geodetic Very Long Baseline Interferometry (VLBI) derived TEC using the Vienna TEC Model for space weather monitoring over HartRAO during the CONT02 and CONT05 campaigns conducted during the years 2002 (near solar maximum) and 005 (near solar minimum). The results verified the use of geodetic VLBI as one of the possible instruments for monitoring space weather impacts on the ionosphere over South Africa.

The DPS-4D is the latest version of digital ionosonde developed by the UMLCAR (University of Massachusetts in Lowell Center for Atmospheric Research) in 2008. This new ionosonde has advances in both the hardware and software which allows for the promised advanced capabilities. The aim of this thesis was to present results from an experiment undertaken using the Hermanus DPS-4D (34.4°S 19.2°E, South Africa), the first of this version to be installed globally, to answer a science question outside of the normally expected capabilities of an ionosonde. The science question posed focused on the ability of the DPS-4D to provide information on day-time Pc3 pulsations evident in the ionosphere. Day-time Pc3 ULF waves propagating down through the ionosphere cause oscillations in the Doppler shift of High Frequency (HF) radio transmissions that are correlated with the magnetic pulsations recorded on the ground. Evidence is presented which shows that no correlation exists between the ground magnetic pulsation data and DPS-4D ionospheric data. The conclusion was reached that although the DPS-4D is more advanced in its eld of technology than its predecessors it may not be used to observe Pc3 pulsations.