Thesis (M. Sc.)--University of Hong Kong, 1997. / Includes bibliographical references (leaf 133-136).

No description available.

Thesis (B.S.)--University of Missouri, School of Mines and Metallurgy, 1916. / E. J. McNely determined to be Earl Joesting McNely from "Forty-Fifth Annual Catalogue. School of Mines and Metallurgy, University of Missouri." The entire thesis text is included in file. Typescript. Illustrated by author. Title from title screen of thesis/dissertation PDF file (viewed April 20, 2009) Includes bibliographical references (p. 23).

Thesis (M.S.)--University of Wisconsin--Madison, 1984. / Typescript. eContent provider-neutral record in process. Description based on print version record. Includes bibliographical references (leaves 190-191).

Thesis (Ph. D.)--Washington University, 1920. / Vita. Slightly abridged from Iron and Steel Institute, Carnegie scholarship memoirs, vol. VII (1916) p. 232-298.

Thesis (Ph. D.)--Washington University, 1920. / Vita. Slightly abridged from Iron and Steel Institute, Carnegie scholarship memoirs, vol. VII (1916) p. 232-298.

The reactivity and micro-structure of three coals and two cokes used in iron and steel manufacture have been studied by a variety of techniques, including gas sorption analysis, thermal analysis and microscopy. Changes in surface areas and porosities of the coals and cokes during combustion have been determined by a gravimetric nitrogen sorption technique at 77K. The cokes and coals have been studied by thermal analysis under isothermal and dynamic conditions in different gas atmospheres. Rates of reaction have been correlated with surface area changes. Attempts have been made to calculate activation energies from Kissinger plots of DTA data. Microstructural changes in the cokes and coals during carbon burn-off have been investigated by electron microscopy. Relative porosities have been estimated by image analysis. Mechanical strengths of the cokes have been measured and correlated with porosity data. Selected metals in the carbons have been determined by flame photometry, atomic absorption spectroscopy and Mossbauer spectroscopy. The composition of residual mineral matter (ash) has been investigated by X-ray diffraction. The chemical compositions of the coal distillates have been characterised by ir/uv spectrosopy, NMR spectroscopy and by GC-MS techniques. Calorific values of the carbons have been determined. Results are discussed in relation to previous work and to applications 1n blast furnace practice. In coal combustion the surface areas increase during the initial stages of carbon burn-off, reaching maximum at about 50% burn-off before decreasing. The increases are considerably higher at 400° and 500° C than at 300° C for all three coals. Hysteresis data from the sorption isotherms show that the coals develop full ranges of mesa-porosity and some micro-porosity during burn-off at the higher temperatures. However, the coal oxidation is only slightly accelerated, since most of the new surface is located in the micro- and meso- pores where access to atmospheric oxygen is restricted by slow diffusion, so that the earlier stages of oxidation are approximately linear with time. This improves our knowledge of current empirical industrial carbon solution tests. There is comparatively little change in surface during the coking of the Coals at 1000° C and only restricted sintering of the coal ashes at 300- 500° C. In the combustion of the cokes in carbon dioxide at 1000° C the maxima in surface areas occur within 25% burn-off. However, one of the cokes shows a second maximum at later stages of burn-off, ascribed to the European component in the parent coal blend. This gives a more uniform rate of burn-off which is advantageous industrially.

Thesis (M.S.)--University of Wisconsin--Madison, 1969. / eContent provider-neutral record in process. Description based on print version record. Includes bibliographical references.

Five materials, copper (two versions), iron, and armour plate steel (two versions) have been tested at different strain-rates and temperatures. All tests were in compression. The materials were studied to provide experimental data for input into hydrocode models of armour behaviour by the Defence Research Agency, Fort Halstead. A wide selection of metals was examined so that comparisons could be drawn between modelling the behaviour of face centred and body centred cubic metals, and to carry out a broader investigation into how the results obtained were affected by the test methods. Experiments were performed at temperatures from -100°C to 20°C and mean plastic strain-rates from 10-3 to 103 S-l, using a Split Hopkinson Pressure Bar (SHPB) system for high strain-rates and a Hounsfield 50 kN machine for quasistatic conditions. The stress-strain behaviour of the materials as a function of temperature and strain-rate was then determined. The effects of interfacial friction on the measured compreSSlve properties of copper and the armour plate steels have been investigated. Since the coefficient of friction was the critical parameter, ring tests were carried out and the Avitzur analysis applied. In general, the coefficient of friction decreased with increasing strain-rate and temperature. The tested specimen's appearance indicated the same friction trends. Hydrocode modelling of the SHPB system produced corrections to the flow stress, to compensate for interfacial friction, that agree well with those predicted by the Avitzur analysis. Deformed finite element mesh plots analysed in conjunction with barrelled specimens have given a clearer insight into the mechanisms of interfacial friction. The Armstrong-Zerilli constitutive models have been applied to copper, iron and armour plate steel results corrected for thermal softening and specimen-platen interfacial friction. These models have been shown to provide a reasonable description of the materials' behaviour. The research investigation has shown that in order to obtain fundamental stressstrain behaviour of the materials, then corrections must be applied, which can be quite significant. These corrections must take into account the effects of material thermal softening and the specimen-platen interfacial friction.

The innovation of crucible steel, a high-carbon, homogeneous, slag-free steel, is regarded as a milestone in the history of the development of ferrous metallurgy. Associated in popular literature with the making of swords, particularly in the Early Islamic period, crucible steel, also known as wootz, possesses exceptional properties of hardness and strength. While much is now understood about its metallurgical composition and structure, little is known of its origins and spread. Few archaeological sites have been uncovered and to date pre-industrial production of this alloy is only known from Central Asia and South Asia. Previous studies have largely focused on individual sites in isolation from wider regional patterns of ferrous metallurgy. As a refining process of iron, it is argued here that crucible steel has a symbiotic relationship with the smelting technologies that produced the raw material for refining. This thesis explores the value of assessing crucible steel production within its wider landscape, cultural and technological context by presenting the evidence from Northern Telangana, India. Historical sources and recent archaeological field surveys have shown that Telangana has a rich metallurgical past, including the manufacture of crucible steel. Despite this, little archaeological work has been conducted in the region to elucidate the nature, scale and diversity of the metallurgical technologies that underpinned its production. Following a major reconnaissance survey in 2010 by the Pioneering Metallurgy Project, the present study tackled the assessment of the large body of field data and the recording of the technological waste assemblage collected. By combining detailed morphological analyses of the collected materials and contextual information recorded during field survey, a better understanding of the techno-cultural role of crucible steel was gained. Technological variations were identified across the survey area and the inter-relationship between iron smelting and crucible steel was assessed. The study reveals that crucible steel was embedded within a long-established local and regional tradition of iron smelting and concludes that it represented the intensification of a pre-existing iron processing industry. The evidence points to a widespread crucible steel production industry with varying degrees of site specialisation, indicating that it was perhaps more common than the few isolated sites commonly referred to in the literature suggests. The comparison of the material evidence with other production sites in Central and South Asia also revealed close parallels to the latter suggesting that they belonged to the same regional manufacturing tradition.