Generation of wastes in the form of liquid, solid or gas is inevitable in any industry.Industrial Solid Waste is the waste that is generated from an industrial or manufacturing process and includes the waste generated from non-manufacturing activities as well.Most of these wastes fall under the category of Ashes, Slagsor Sludges. For the present work, three types of secondary lead slag, two types of granulated blast furnace slag (GBS) or iron slag and four types of steel slags were procured and studied.An elaborate study on various characteristics of the slags has been performed. Based on the results, all the possible applications for the individual slags are considered. The performance of the secondary lead slag as an embankment material was analyzed. The slope stability for various conditionswas analyzed using Geo5 and experimentally determined strength parameters. It was found that the material can be used safely for embankment constructions.The CBR values were very good in the range for both GBS and steel slag,thus repeated load triaxial test are done to determine the resilient modulus. k1-k3model was adopted and the regression coefficients were determined. Based on the results the pavement design is done using KENPAVE software. An exercise has been performed to determine the quantity of the conventional material that could be saved, considering the type and size of the pavement. For the aggregate sized steel slag, the tests were done to find the suitability of the material for various applications like, as railway ballast, concrete aggregate, gabion and rip rap stones. And the tests result shows the material to be suitable for these applications and is expected to perform well. Study on morphological parameters reveals that the size and gradation of any material plays an important role in its mechanical behavior, however in the case of slags, this could be tailor made by using appropriate crushers, as per the requirements.