Thesis (MScEng)--University of Stellenbosch, 2004. / ENGLISH ABSTRACT: Connections are a vitally important part of any structural framework. Thisstatement may seem obvious, yet it is surprisinghow often insufficient attention is given to the design of this essential aspect of steelwork projects. This thesis concentrates on developing a specification for designing steel connections with the main emphasis on the practical and economical design of typical connections. The design methods of the specification are developed according to the new South African design code which is currently in draft form, namely SANS10162:Code of Practice for the Structural Use of Steel: Part 1: Limit States Design of hot-rolled steelwork - 2002. An object-oriented framework and associated graphical user interface for designing the connections are developed and implemented. The primary objectives of the implemented framework are: • Being generic in the sensethat it allows for easy addition of additional connection types, • To implement the design paradigm of the South African code, without fixing specific parameter values programmatically in the implementation and • To build on an existing architecture that allows for structural analysis,structural steel member design and distributed collaboration in the design process. / AFRIKAANSE OPSOMMING: Verbindings vorm In uiters belangrike deel van enige staal struktuur. Alhoewel hierdie stelling dalk vanselfsprekend mag wees, is dit egter verbasend hoe selde voldoende aandag aan die ontwerp van hierdie essensiëleaspek van staalwerk projekte gegee word. Hierdie tesis konsentreer op die ontwikkeling van In spesifikasievir die ontwerp van staal verbindings met die oog op praktiese en ekonomiese ontwerp van tipiese verbindings. Hierdie ontwerpmetodes isgebasseer op die nuwe Suid Afrikaanse ontwerpkode wat tans in proef-vorm is, naamlik SANS 10162: Gebruikskode vir Stoa/bouwerk: Dee/I: Grenstoestandontwerp vir warmgewa/ste staa/werk - 2002. In Objek orienteerde raamwerk en In geassosieerde grafiese gebruikerskoppelvlak word ontwikkel en geimplimenteer. Die primêre mikpunte van hierdie geimplimenteerde raamwerk is: • Om generies te wees in die sin dat dit die byvoeging van addisionele verbinding tipes toelaat, • Om die paradigma van die Suid Afrikaanse kode te implimenteer sonder om enige waardes van spesifieke parameters programmaties vas te lê, en • Om dit op In bestaande argitektuur te bou wat strukturele analise, strukturele ontwerp en verspreide samewerking in die ontwerpproses toelaat.

This thesis investigates the behaviour of hollow and concrete filled steel columns fabricated from thin steel plates. The columns are investigated under axial, uniaxial and biaxial loading. The currently available international standards for composite structures are limited to the design of concrete filled steel columns with compact sections and yield stress of steel up to 460 N/mm2. This thesis consists of both experimental and analytical studies and design recommendations for future use. Three comprehensive series of experimental tests are conducted on hollow and concrete filled steel columns. The principal parameters that have been considered in the test programmes are the slenderness of the component plates, the yield stress of the steel and the loading conditions. In the first test series, three slender hollow steel columns and three slender composite columns are tested under uniaxial loading. The steel utilised is mild steel. High strength steel is utilised in the second test programme. In this test series four stub columns, eight short columns and eight slender columns are tested, each set consists of four hollow and four composite columns. Short columns are tested under axial loading to investigate the confinement effect provided by the steel casing. Slender columns are tested under uniaxial loading to investigate the coupled instability of local and global buckling. The third test programme is quite novel and considers the behaviour of hollow and concrete filled steel columns fabricated with high strength structural steel plate and subjected to biaxial bending. In this test eight short columns and ten slender columns each of them consisting of hollow and composite columns are investigated under biaxial loading. Analytical models are developed herein to elucidate the behaviour of the hollow and composite columns considering cross section slenderness, yield stress and loading conditions. An iterative model considering the coupled global and local buckling in the elastic and plastic range incorporating material nonlinearities is developed to investigate the behaviour of slender columns fabricated from mild steel. An improved deformation control model is developed to investigate the behaviour of slender high strength steel columns considering the confinement effect and local and post-local buckling in the elastic and plastic range. Then a numerical model for biaxial bending is developed to study the behaviour of short and slender concrete filled high strength steel columns under biaxial loading incorporating interaction buckling considering material and geometric nonlinearities. The scope of the thesis presents a wide range of experimental and theoretical studies of an extremely novel nature. It demonstrates the benefit of confinement and the consideration of local and post-local buckling in the elastic and plastic range. It is hoped that this research will contribute to the area of composite steel-concrete structural applications.

Thesis (Ph. D.) -- University of Western Sydney, Hawkesbury, 2000. / Includes bibliographical references (leaves 225-241).

Thesis (Ph. D.)--Carleton University, 2002. / Includes bibliographical references (p. 263-286). Also available in electronic format on the Internet.

Thesis (M.App.Sc.) - Carleton University, 2006. / Includes bibliographical references (p. 149-154). Also available in electronic format on the Internet.

Thesis (doctoral)--Otto-Friedrich-Universität, Bamberg, 1999. / Includes bibliographical references (p. 507-524) and index.

Thesis (Ph. D.)--Johns Hopkins University, 1917. / Vita. Published also as Johns Hopkins University studies in historical and political science, ser. xxxviii, no. 2. Includes bibliographical references and index.

Thesis (M.S.)--Oregon State University, 2009. / Printout. Includes bibliographical references (leaves 133-138). Also available on the World Wide Web.

Thesis (Ph. D.)--University of Missouri-Columbia, 1997. / Typescript. Vita. Includes bibliographical references (leaves 223-229). Also available on the Internet.

Thesis (M.A.)--Indiana University, 2008. / Department of Philanthropic Studies, Indiana University-Purdue University Indianapolis (IUPUI). Advisor(s): Dwight F. Burlingame, Leslie Lenkowsky, Martha I. Pallante. Includes vitae. Includes bibliographical references (leaves 66-69).