Spelling suggestions: "subject:"tet engines"" "subject:"tet angines""
1 |
Effects of upstream nozzle geometry on rectangular free jetsTipnis, T. J 17 September 2010 (has links)
This study is aimed at understanding the effects of changing the upstream nozzle geometry on the development of rectangular free jets. An existing converging rectangular nozzle with an exit aspect ratio of 4 and a circular inlet (AR4 nozzle) has been used as the basic configuration for this work. The study is primarily based on the results of numerical simulations wherein the internal geometry variation is accomplished by changing the inlet aspect ratio (AR,) and the length of the converging section, expressed as a ratio with respect to the length of the nozzle (called 'converging section ratio*, CSR); all the other parameters are kept constant. The results from LDA experiments done on the AR4 nozzle are presented and used as validation data for the CPD simulations. Analyses of the numerical results help in understanding the variation of the jet spreading for different combinations of AR, and CSR. Two parameters are identified for describing the jet development: the cross-over point (XC), defined as the location downstream of the exit where the jet half-velocity-widths (B) along the major and minor axes are equal, and the difference in the half-velocity-widths at 30 nozzle equivalent diameters (Dm) from the exit (AB30), to ascertain the occurrence of axis-switching. For a given AR,, XC varies linearly with CSR; the variation of XC is non-linear with AR, for a constant CSR. The A1330 variation is non-linear with both AR, and CSR; the other variable being kept constant. The data obtained from the simulations are further used to propose two parametric models which can be used to predict the occurrence of axis-switching, within the scope of this work. The parametric models are validated and future work is proposed.
|
2 |
Effects of upstream nozzle geometry on rectangular free jetsTipnis, T J 17 September 2010 (has links)
This study is aimed at understanding the effects of changing the upstream nozzle geometry on the development of rectangular free jets. An existing converging rectangular nozzle with an exit aspect ratio of 4 and a circular inlet (AR4 nozzle) has been used as the basic configuration for this work. The study is primarily based on the results of numerical simulations wherein the internal geometry variation is accomplished by changing the inlet aspect ratio (AR,) and the length of the converging section, expressed as a ratio with respect to the length of the nozzle (called 'converging section ratio*, CSR); all the other parameters are kept constant. The results from LDA experiments done on the AR4 nozzle are presented and used as validation data for the CPD simulations. Analyses of the numerical results help in understanding the variation of the jet spreading for different combinations of AR, and CSR. Two parameters are identified for describing the jet development: the cross-over point (XC), defined as the location downstream of the exit where the jet half-velocity-widths (B) along the major and minor axes are equal, and the difference in the half-velocity-widths at 30 nozzle equivalent diameters (Dm) from the exit (AB30), to ascertain the occurrence of axis-switching. For a given AR,, XC varies linearly with CSR; the variation of XC is non-linear with AR, for a constant CSR. The A1330 variation is non-linear with both AR, and CSR; the other variable being kept constant. The data obtained from the simulations are further used to propose two parametric models which can be used to predict the occurrence of axis-switching, within the scope of this work. The parametric models are validated and future work is proposed.
|
3 |
Modal analysis and conditional sampling of a subsonic coaxial jet梁之光, Leung, Chi-kwong, Eric. January 1984 (has links)
published_or_final_version / Mechanical Engineering / Master / Master of Science in Engineering
|
4 |
Stress and failure analysis of curvic couplingsRichardson, Ian J. January 1999 (has links)
No description available.
|
5 |
Effects of upstream nozzle geometry on rectangular free jetsTipnis, T. J. January 2010 (has links)
This study is aimed at understanding the effects of changing the upstream nozzle geometry on the development of rectangular free jets. An existing converging rectangular nozzle with an exit aspect ratio of 4 and a circular inlet (AR4 nozzle) has been used as the basic configuration for this work. The study is primarily based on the results of numerical simulations wherein the internal geometry variation is accomplished by changing the inlet aspect ratio (AR,) and the length of the converging section, expressed as a ratio with respect to the length of the nozzle (called 'converging section ratio*, CSR); all the other parameters are kept constant. The results from LDA experiments done on the AR4 nozzle are presented and used as validation data for the CPD simulations. Analyses of the numerical results help in understanding the variation of the jet spreading for different combinations of AR, and CSR. Two parameters are identified for describing the jet development: the cross-over point (XC), defined as the location downstream of the exit where the jet half-velocity-widths (B) along the major and minor axes are equal, and the difference in the half-velocity-widths at 30 nozzle equivalent diameters (Dm) from the exit (AB30), to ascertain the occurrence of axis-switching. For a given AR, XC varies linearly with CSR; the variation of XC is non-linear with AR, for a constant CSR. The A1330 variation is non-linear with both AR, and CSR; the other variable being kept constant. The data obtained from the simulations are further used to propose two parametric models which can be used to predict the occurrence of axis-switching, within the scope of this work. The parametric models are validated and future work is proposed.
|
6 |
Stationary and rotating hot jet ignition and flame propagation in a premixed cell /Bilgin, Murat. January 1998 (has links)
Thesis (Ph. D.)--University of Washington, 1998. / Vita. Includes bibliographical references (leaves [198]-190).
|
7 |
Fan-nacelle interactions in natural windHall, Cesare Alan January 2003 (has links)
No description available.
|
8 |
Three dimensional elliptic computations for viscous turbomachinery flowsLapworth, B. L. January 1987 (has links)
No description available.
|
9 |
Parametric study of liquid fuel jet in crossflow at conditions typical of aerospace applicationsReichel, Jonathan R. January 2008 (has links)
Thesis (M. S.)--Aerospace Engineering, Georgia Institute of Technology, 2008. / Committee Chair: Ben Zinn; Committee Member: Eugene Lubarsky; Committee Member: Jerry Seitzman.
|
10 |
Simulation of tri-axially braided composites half-cylinder behavior during balistic [sic] impactStaniszewski, Marcin. January 2007 (has links)
Thesis (M.S.)--University of Akron, Dept. of Civil Engineering, 2007. / "May, 2007." Title from electronic thesis title page (viewed 4/28/2009) Advisor, Wieslaw K. Binienda; Committee members, Craig C. Menzemer, Ala Abbas; Department Chair, Wieslaw K. Binienda; Dean of the College, George K. Haritos; Dean of the Graduate School, George R. Newkome. Includes bibliographical references.
|
Page generated in 0.0333 seconds