The PhD thesis concerns the synthesis of novel zeolite materials, investigation of their properties and their possible use in catalytic application. The work was focused on the two- dimensional zeolites. The thesis was worked out at the Department of Synthesis and Catalysis at J. Heyrovský Institute of Physical Chemistry, AS CR. Germanosilicate UTL (Si/Ge molar ratio 4.0-6.5) was found to undergo unique structural changes in the neutral or acid environment leading to transformation of its three-dimensional framework into two-dimensional layered material denoted IPC-1P. The UTL degradation, so called top-down synthesis, was enabled due to a presence of double-four-units (D4Rs), which can be seen as supporting units/pillars between the rigid layers. The preferential location of Ge in D4Rs makes the units an ideal target for their selective degradation. The interlayer space in lamellar IPC-1P was modified by swelling with long-organic chain surfactant (material IPC-1SW). To keep the interlayer space permanently expanded (up to 3.3 nm) the silica amorphous pillars were subsequently introduced (material IPC-1PI). The integrity of the layers and their preserved UTL character was confirmed in all members of IPC-1 family by HRTEM and electron diffraction measuring. The layers of IPC-1P were condensed back...

Development of sustainable and environmentally friendly chemical processes is of vital importance nowadays. Although there is a palette of different synthetic methods for the formation of epoxides, sulphoxides and sulphones, from both economic and environmental points of view, a direct oxidation with a simple oxidant is highly appreciated. The main goals of the thesis were design and synthesis of novel titanium containing zeolitic materials with the ability to catalyse selective oxidation of sterically demanding organic compounds, particularly epoxidation of cyclic olefins and terpenes and oxidation of bulky thioethers to corresponding sulphoxides and sulphones with hydrogen peroxide as the oxidant. Two novel extra-large pore titanosilicates were prepared by means of hydrothermal synthesis (Ti-CFI, Ti-UTL), three large-pore titanosilicates (Ti-CON, Ti-AFI, Ti-IFR) were prepared using two step deboronation - liquid phase titanium impregnation procedure and two groups of lamellar materials were prepared. One group was based on modified nanosheet TS-1; the other was prepared from Ti-IPC- 1P lamellar precursor, which was prepared by means of top-down transformation of Ti-UTL. Last but not least, the Ti-UTL was transformed into new titanosilicates Ti-IPC-2 (OKO structure) and Ti-IPC-4 (PCR structure) by...

Title: Electronics and adsorption properties of model catalytic systems contains cerium Author: Miloš Cabala Department: Department of Surface and Plasma Science, Supervisor: RNDr. Kateřina Veltruská, Department of Surface and Plasma Science, Abstract: The doctoral thesis contains the study of model catalyst systems based on cerium and ceria. The thesis deals with model systems of CeAg, CeO2/Cu(111), Ni- CeO2/Cu(111) a Ni-Sn-CeO2/Cu(111). We have studied these systems using photoelectron spectroscopy, ion scattering spectroscopy and low energy electron diffraction. Model systems were prepared under strictly defined conditions. The strong bimetallic interaction was observed on the CeAg layers. Molecular adsorption of carbon monoxide on CeAg was demonstrated. We also observed intensive reaction of these layers with oxygen. By measurements in different directions of surface Brillouin zone, we managed to reconstruct the band structure of the prepared CeO2/Cu(111) layer. We have shown that the Cu substrate interacts weakly with deposited CeO2 layer. This interaction results in a charge transfer from Cu into CeO2. Overall, in the valence spectrum we have identified three main electron bands corresponding to O 2p state bound in CeO2. It has been proven that the deposition of Ni on CeO2 layers leads to partial...

New procedures for preparation of polyacetylenes with highly luminescent naphthalimide groups that might be potentially utilized in optoelectronics and sensors are developed within the framework of present doctoral thesis. The procedures provide luminescent a) linear polyacetylenes that can be processed from solutions, and b) mesoporous network polyacetylenes with high pore volume. Two paths to soluble polyacetylenes are used: (i) copolymerization of ethynyl- functionalized naphthalimide (monomer PN) and a monoethynyl aromate catalyzed with [Rh(nbd)acac], and (ii) modification of poly(disubstituted acetylene)s carrying -chloroalkyl pendants involving the exchange of chlorine atoms for azido groups and subsequent "click"- reaction of Huisgen type of azido groups with ethynyl groups of PN. The PN does not homopolymerize but copolymerizes with ethynylaromates. The highest possible molar fraction of the PN units in copolymers is of 0.5, which suggests the absence of PN dyads or longer sequences in copolymers and the alternating arrangement of PN units in the copolymers of the composition of 0.5. Surprisingly, ethynylarenes that give insoluble homopolymers gave soluble copolymers with PN. The modification procedure requires knowledge on the effect of the monomer structure symmetry and substituent...

Charles University, Faculty of Pharmacy in Hradec Králové Department Department of Organic and Bioorganic Chemistry Candidate Mgr. Petr Matouš Supervisor prof. RNDr. Milan Pour, Ph.D. Titel of Doctoral Thesis Gold-Catalyzed Cyclizations of 1,5-Enynes This Ph.D. thesis deals with the development of gold(I)-catalyzed cyclizations of propargylamino acrylates (3-aza-1,5-enynes) in the presence of an external nucleophile. A library of tetrahydropyridines with an unusual hemiaminal ether functional group was thus prepared via the cyclization of a series of substituted enynes. The influence of the protective group as well as the substitution on the chemoselectivity of the reaction was demonstrated. The tetrahydropyridines were further utilized as precursors for the preparation of pharmaceutically important nitrogen heterocycles. The reduction of selected compounds furnished substituted piperidines, while Diels-Alder cycloaddition of alkenylated tetrahydropyridines gave rise to isoquinoline derivatives. Additional ortho-fused heterocycles (furopyridine, pyrrolopyridine and chromenopyridine) were prepared by the intramolecular version of the cyclizations of enynes with pending internal nucleophiles.

Catalytic enantioselective desymmetrization of meso-epoxides is widely used in many areas of chemistry. Such process is usually catalyzed by a transition metal complex with a chiral ligand. Recently, a synthesis of an analogue of Bolm's 2,2'-bipyridine ligand was developed and its combination with metal salts were tested in various reactions. In this master's thesis, a catalytic system composed of Sc(OTf)3/Bolm's ligand analogue was studied in alcoholysis and aminolysis of the meso- epoxides. The reaction has been extended to a broad range of alcohols providing 1,2-diol monoethers in excellent enantioselectivity up to 99% ee. The aminolysis of meso-epoxides has been optimized, as well. The catalyst loading could be lowered to 1 mol% with only marginal effects on the enantioselectivity. Key words: epoxides, enantioselective catalysis, chiral ligands.

Thermal cyclotrimerization was first discovered in 1866 by Bertholet, then, in 1948, Reppe and Schweckendiek reported the first transition metal catalyzed [2+2+2] cyclotrimerization of alkynes using Ni complexes. In the following 70 years of research, transition metal catalyzed [2+2+2] cyclotrimerization have become a powerful method for the synthesis of variously decorated aromatic rings and new catalytic systems as well as reaction conditions have been successfully applied. Herein, I would like to show the use of this reaction for the synthesis of the important class of fluorene-based compounds. In particular, a regioselective cyclotrimerization of 2,4-disubstituted fluorenols was achieved by Ru-catalyzed partially intermolecular [2+2+2] cyclotrimerization of diynes with terminal alkynes. Rh-based complex proved to be a straightforward transition metal catalyst for the construction of selectively fluorinated [5] and [6]helical dispiroindenofluorenes using intramolecular [2+2+2] cycloaddition of triynediols as the key synthetic step. Moreover, Ni complexes demonstrated to be a valid choice for the selective synthesis of unsymmetrical [7]helical indenofluorenones, while other catalytic systems based on Rh, Ru, Pd and Co gave mixture of the desired cyclotrimerization compound together with the...

Title: Role of surface defects in ceria-based catalysis Author: Andrii Tovt Department: Department of Surface and Plasma Science Supervisor of the doctoral thesis: doc. Mgr. Josef Mysliveček Ph.D., Department of Surface and Plasma Science Abstract: This work concentrates on the analysis of fundamental physicochemical properties of Pt-CeOx, single-atom Pt1 /CeOx, and inverse CeOx/Cu(111) catalysts. Preparation method for stabilized atomically-dispersed Pt2+ ions on ceria was developed and adsorption sites for Pt ions were thoroughly studied using advanced surface science techniques supported by theoretical methods. The mechanism of Pt2+ stabilization on ceria steps was revealed and the step capacity towards Pt2+ ions was estimated. Also, the preparation method for well-ordered cerium oxide ultrathin films with different stoichiometry and ordering of surface oxygen vacancies was developed, and the Ceria/Cu(111) interaction was investigated. Key words: heterogeneous catalysis, model systems, single-atom catalysis, platinum ions, cerium oxide.

This diploma thesis deals with the scope of organocatalytic concept for the preparation of enantiomerically pure organic compounds, containing fluorine atom. Our attention was focused on the use of easily available α,β-unsaturated aldehydes and ketones as starting materials and commercially available secondary amines as catalysts. The first part of the work is dedicated to the enantioselective cyclization reaction of hydrazone (24) with cyclohex-2-enone (25). The second part describes a study of enantioselective nucleophilic addition of diethyl 2-fluoromalonate (31a) to α,β-unsaturated aldehydes (30) via enamine activation.

This thesis deals with an enantioselective synthesis of cyclic compounds by using a combination of organocatalysis and transition metal catalysis. The thesis deals mainly with usage of aminocatalyst for activation of aldehydes and copper catalyst for activation of terminal triple bond. The first part is focused on the preparation of starting compounds for cyclizations (α-oxoesters, α- substituted nitroalkanes and α-substituted aldehydes). The second part concerns carbocyclization itself and optimization of reaction conditions to achieve highly stereoselective reaction. Powered by TCPDF (www.tcpdf.org)