No description available.

Progress in development of modern LEDs, their long lifetime and high luminous efficacy predetermine them for usage in lighting systems. This master's thesis examines possibilities of application of LEDs in luminaires, parameters of diodes and problems, which can appear in construction of luminaire with LED lighting source. In the practical part of this thesis a luminaire is designed, capable of illuminating traffic signs, vertical surfaces, billboards and fasades. By standards required parameters of a lighting system and adaptability of application must be considered in complex predesign. Simulations of lighting scene, created in special computer software, measurements of optical point’s parameters and construction of real luminaire model using high quality CREE LEDs, are included in analysis of the problem. Parameters of the luminaire were proved by measurements of product’s attributes at light laboratory. There are also some suggestions for improvement and further development of the product.

This thesis deals with the processing of light technical parameters and performance of key LED chips for their applications in lighting systems. The aim is to create a laboratory model for measuring the qualitative and quantitative parameters of highly luminous light LED emitted depending on the angle, using a spherical integrator 0.3 m, goniometer and fiber spektroradiometr /luxmeters. Goniometer is designed using modular optomechanical parts company Thorlabs. Due to the current passing through the LED chips heat up considerably. To light LED chip parameters tested were not affected by heat from the chip is required to pay the heat generated by a passive radiator. Another part of this thesis is the reconstruction of an older model spherical integrator. Reconstruction must be undertaken so as to ensure sufficient cooling again tested LEDs. Light scattered in the ball of the integrator is led by the optical cable to the spektroradiometr that are subsequently recorded its parameters. The second element used to measure the light produced by the LED source is photocell. Spherical integrator must be appropriately modified to indicate the two measuring elements and also meet the standards of determining the correctness of measurement. At the end of the measurement results will be compared with catalog values provided by the manufacturer.