Distributed parameter systems (DPS) are systems defined on infinite dimensional spaces. This includes problems governed by partial differential equations (PDEs) and delay differential equations. In order to numerically implement a controller for a physical system we often first approximate the PDE and the PDE controller using some finite dimensional scheme. However, control design at this level will typically give rise to controllers that are inherently large-scale. This presents a challenge since we are interested in the design of robust, real-time controllers for physical systems. Therefore, a reduction in the size of the model and/or controller must take place at some point. Traditional methods to obtain lower order controllers involve reducing the model from that for the PDE, and then applying a standard control design technique. One such model reduction technique is balanced truncation. However, it has been argued that this type of method may have an inherent weakness since there is a loss of physical information from the high order, PDE approximating model prior to control design. In an attempt to capture characteristics of the PDE controller before the reduction step, alternative techniques have been introduced that can be thought of as controller reduction methods as opposed to model reduction methods. One such technique is LQG balanced truncation. Only recently has theory for LQG balanced truncation been developed in the infinite dimensional setting. In this work, we numerically investigate the viability of LQG balanced truncation as a suitable means for designing low order, robust controllers for distributed parameter systems. We accomplish this by applying both balanced reduction techniques, coupled with LQG, MinMax and central control designs for the low order controllers, to the cable mass, Klein-Gordon, and Euler-Bernoulli beam PDE systems. All numerical results include a comparison of controller performance and robustness properties of the closed loop systems. / Ph. D.

When designing a control for a physical system described by a PDE, it is often necessary to reduce the size of the controller for the PDE system. This is done so that real time control can be achieved. One approach often taken by engineers is to reduce the approximating finite-dimensional system using a balanced reduction method known as balanced truncation and then design a control for the lower order system. The unsettling idea about this method is that it involves discarding information and then designing a control. What if valuable physical information were lost that would have allowed a more effective control to be designed? This paper will explore an alternate balanced reduction method called LQG balancing. This approach allows for the designing of a control on the full order approximating system and then reducing the control. Along the way, the basic ideas of feedback control design will be discussed, including system balancing and model reduction. Following, there will be mention of the linear Klein-Gordon equation and the development of the one-dimensional finite element approximation of the PDE. Finally, simulations and numerical experiments are used to discuss the differences between the two balanced reduction methods. / Master of Science