The EC Landfill Directive (1999), which is enforced in England and Wales through the Landfill (England and Wales) Regulations (2002), has increased the technical challenge associated with the design and construction of landfill containment systems, in particular those on steep side slopes. Increased numbers of lining system components, varied configurations, and complex loading scenarios require advanced analysis tools to facilitate design. This project involved the development of advanced numerical modelling techniques, based on the FLAC finite difference modelling code. The analysis toolbox can be used to predict the behaviour of multilayered geosynthetic and soil lining systems, during and after staged construction. The model can include non-linear interface and geosynthetic axial properties, represent complex loading, including downdrag from the waste mass, whilst retaining the flexibility to represent varied geometries and include engineered support structures. Whilst numerical modelling is becoming increasingly commonplace in commercial design, there is little evidence of the validation of numerical models with field or experimental data. Validation of the analysis toolbox described in this document was conducted by back analysis of published data, modelling of landfill failure mechanisms, and comparisons to large scale laboratory testing. Design of field scale instrumentation has also been carried out as part of this project. The influence of interface shear strength variability has been assessed through the compilation of a comprehensive database, and the effect of this variability on lining system behaviour assessed through reliability based analyses. This has shown probability of failures may be higher than proposed limiting values when adopting traditional accepted factors of safety. A key area of interest identified during the project was the requirement for support, potentially through reinforcement, of the geological barrier. The inclusion of randomly reinforced fibres in bentonite enhanced soil has shown the potential for increased strength, without adverse effects on hydraulic barrier performance. ii Additionally, the influence of geomembrane seams on lining system integrity has been investigated, showing that fusion welded seams can result in stress concentration and extruded seams can cause significant stress concentration.

Dumping of municipal solid waste (MSW) generated due to anthropogenic activities in any barren land or out fields causes severe hazards to human populations, ecosystems and the environment. In order to avoid this, it is required to design landfills in an engineered and scientific manner. Therefore, it is necessary to understand the behaviour of landfills over a period of time, to design landfills for site specific conditions. In this thesis such an attempt is made to evaluate performance of conventional landfill system using a large scale anaerobic reactor in the laboratory. The performance of the containment (bottom liner and final cover) systems is evaluated through numerical modelling and reliability based analysis. Response Surface Methodology (RSM) is used to develop linear regression models. Influence of various parameters and their uncertainty on the reliability of the containment systems are studied for various scenarios and conditions. Reliability assessment of containment systems play a decisive role in taking remedial measures in order to reduce its adverse affects on the environment and human health in the vicinity of landfill sites. On the other hand, pre-assessment of risk guides the engineers, planners and decision makers in achieving the goal of sustainable solid waste management as well as safe landfills. The thesis also includes assessment of vulnerability of groundwater to contamination, identification and ranking of suitable sites for municipal solid waste (MSW) disposal in the Bengaluru district, using remote sensing and Geographic information system (GIS) integrated with analytical hierarchy process (AHP), a multi criteria decision making tool. The study considers various land use, geological, hydrogeological and environmental factors as criteria. As a result, two most suitable locations are identified around the Bengaluru city and their descriptions are provided. Further, reliability analysis of the suitability of sites is evaluated considering criteria as random variables. The proposed reliability based approach helps the decision makers and planners to choose site locations having low probability of environmental pollution. The provided methods in the thesis can be effectively used for engineered design of landfills.

The objective of this thesis is to evaluate the engineering properties of Municipal Solid Waste (MSW) that are necessary in the design of landfills. The engineering properties of MSW such as compressibility, shear strength, stiffness and hydraulic conductivity are crucial in design and construction of landfills. The variation of the engineering properties with time, age and degradation are of paramount importance in the field of landfill engineering. There is a need to address the role of the engineering properties in landfill engineering as it is not apparent how the engineering characteristics vary with time. The thesis presents the results of study of the engineering properties of MSW comprehensively and develops experimental data for design of MSW landfills. The work includes the study of the index properties and the engineering properties of MSW such as compressibility, shear strength, shear modulus and damping ratio and a detailed experimental study of the bioreactor landfill. The components of settlements, variation of shear strength with respect to unit weight and particle size are determined experimentally and analyzed. The dynamic properties such as shear modulus and material damping ratio and its variation with parameters such as unit weight, load, amplitude, degradation and moisture content are studied and analyzed. The normalized shear modulus reduction curve which is used in the seismic analysis of the landfills is developed for MSW based on the experimental results and previous studies. A pilot-scale bioreactor was setup in the laboratory for long term monitoring of the settlement, temperature variation and gas production simultaneously. The parameters of interest viz, pH, BOD, COD, conductivity, alkalinity, methane and carbon-di-oxide were determined. The generated data can be effectively used in the engineered design of landfills. For a better understanding, the present thesis is divided into the following eight chapter Chapter 1 provides a general introduction to the thesis with respect to the importance of engineering properties of MSW and presents the organization of the thesis. Chapter 2 presents a detailed review of literature pertaining to the basic, index and the engineering properties of MSW namely compressibility, shear strength, shear modulus and damping ratio, bioreactor landfill and also the scope of the study. Chapter 3 includes the materials and methods followed in the thesis. Chapter 4 presents the evaluation of compressibility characteristics of MSW including the components of settlement and the settlement model parameters. Chapter 5 presents the determination of the shear strength properties of MSW using direct shear tests and triaxial tests. The variation of the strength with respect to unit weight and the particle size is examined. The results are examined in terms of strength ratio and stiffness ratio and the implications are discussed. Chapter 6 presents the study of the dynamic characters of MSW. The variation of the shear modulus and damping ratio with respect to unit weight, confining pressure, loading frequency, decomposition and moisture content are analyzed. Normalized shear modulus reduction and damping curves are proposed for seismic analysis. Chapter 7 presents the study of the conventional and the bioreactor landfill in a small scale laboratory setup. A large scale experimental setup is fabricated to study the characteristics of a bioreactor landfill and includes the long term monitoring and analysis of temperature, gas, settlement and leachate characteristics periodically. The results of the comprehensive study are presented in this chapter. Chapter 8 summarizes the important conclusions from the various experimental studies reported in this dissertation. Conclusions and the scope of future work are presented. A detailed list of references and the list of publications from the thesis are presented at the end. Appendix A presents the life cycle analysis and life cycle cost analysis of MSW land disposal options. The land disposal options such as open dumps, engineered landfills and bioreactor landfills are analyzed in this study.