abstract: A numerical model for design of the geomembrane elements of waste containment systems has been validated by laboratory testing. Due to the absence of any instrumented case histories of seismic performance of geomembrane liner systems, a large scale centrifuge test of a model geomembrane-lined landfill subject to seismic loading was conducted at the University of California at Davis Centrifuge Test facility as part of National Science Foundation Network for Earthquake the Engineering Simulation Research (NEESR) program. Data collected in the large scale centrifuge test included waste settlement, liner strains and earthquake accelerations at various locations throughout the model. This data on landfill and liner seismic performance has been supplemented with additional laboratory and small scale centrifuge tests to determine the parameters required for the numerical model, including strength and stiffness of the model materials, interface shear strengths, and interface stiffness. The numerical model explicitly assesses the forces and strains in the geomembrane elements of a containment system to subject to both static and seismic loads the computer code FLACTM, a finite difference program for non-linear analysis of continua. The model employs a beam element with zero moment of inertia and with interface elements on both sides to model to represent the geomembrane elements in the liner system. The model also includes non-linear constitutive models for the stress-strain behavior of geomembrane beam elements and an elastic-perfectly plastic model for the load-displacement behavior of the beam interfaces. Parametric studies are conducted with the validated numerical model to develop recommendations for landfill design, construction, and construction quality assurance. / Dissertation/Thesis / Doctoral Dissertation Civil and Environmental Engineering 2017