Spelling suggestions: "subject:"latticereduction"" "subject:"particeeduction""
1 |
Adaptive Lattice Reduction in MIMO SystemsDanesh Jafari, Mohammad Erfan January 2008 (has links)
In multiple-input multiple-output (MIMO) systems, the use of lattice reduction methods such as the one proposed by Lenstra-Lenstra-Lovasz (LLL) significantly improves the performance of the suboptimal solutions like zero-forcing (ZF) and zero-forcing deceision-feedback-equalizer (ZF-DFE). Today's high rate data communication demands faster lattice reduction methods. Taking advantage of the temporal correlation of a Rayleigh fading channel, a new method is proposed to reduce the complexity of the lattice reduction methods. The proposed method achieves the same error performance as the original lattice reduction methods, but significantly reduces the complexity of lattice reduction algorithm. The proposed method can be used in any MIMO scenario, such as the MIMO detection, and broadcast cases, which are studied in this work.
|
2 |
Adaptive Lattice Reduction in MIMO SystemsDanesh Jafari, Mohammad Erfan January 2008 (has links)
In multiple-input multiple-output (MIMO) systems, the use of lattice reduction methods such as the one proposed by Lenstra-Lenstra-Lovasz (LLL) significantly improves the performance of the suboptimal solutions like zero-forcing (ZF) and zero-forcing deceision-feedback-equalizer (ZF-DFE). Today's high rate data communication demands faster lattice reduction methods. Taking advantage of the temporal correlation of a Rayleigh fading channel, a new method is proposed to reduce the complexity of the lattice reduction methods. The proposed method achieves the same error performance as the original lattice reduction methods, but significantly reduces the complexity of lattice reduction algorithm. The proposed method can be used in any MIMO scenario, such as the MIMO detection, and broadcast cases, which are studied in this work.
|
3 |
VLSI Implementation of Lattice Reduction for MIMO Wireless Communication SystemsYoussef, Ameer 31 December 2010 (has links)
Lattice-Reduction has become a popular way of improving the performance of MIMO detectors. However, developing an efficient high-throughput VLSI implementation of LR has been a major challenge in the literature. This thesis proposes a hardware-optimized version of the popular LLL algorithm that reduces its complexity by 70% and achieves a fixed runtime while maintaining ML diversity. The proposed algorithm is implemented for 4x4 MIMO systems and uses a novel pipelined architecture that achieves a fixed low processing latency of 40 cycles, resulting in a fixed throughput that is independent of the channel correlation. The proposed LR core, fabricated in 0.13um CMOS, is the first fabricated and tested LR ASIC implementation in the literature. Test results show that the LR core achieves a maximum clock rate of 204 MHz, yielding a throughput of 510 Mbps, thus satisfying the aggressive throughput requirements of emerging 4G wireless standards, such as IEEE-802.16m and LTE-Advanced.
|
4 |
VLSI Implementation of Lattice Reduction for MIMO Wireless Communication SystemsYoussef, Ameer 31 December 2010 (has links)
Lattice-Reduction has become a popular way of improving the performance of MIMO detectors. However, developing an efficient high-throughput VLSI implementation of LR has been a major challenge in the literature. This thesis proposes a hardware-optimized version of the popular LLL algorithm that reduces its complexity by 70% and achieves a fixed runtime while maintaining ML diversity. The proposed algorithm is implemented for 4x4 MIMO systems and uses a novel pipelined architecture that achieves a fixed low processing latency of 40 cycles, resulting in a fixed throughput that is independent of the channel correlation. The proposed LR core, fabricated in 0.13um CMOS, is the first fabricated and tested LR ASIC implementation in the literature. Test results show that the LR core achieves a maximum clock rate of 204 MHz, yielding a throughput of 510 Mbps, thus satisfying the aggressive throughput requirements of emerging 4G wireless standards, such as IEEE-802.16m and LTE-Advanced.
|
5 |
VLSI Implementation of Digital Signal Processing Algorithms for MIMO/SISO SystemsShabany, Mahdi 30 July 2009 (has links)
The efficient high-throughput VLSI implementation of
near-optimal multiple-input multiple-output (MIMO) detectors for 4x4 MIMO systems in high-order quadrature amplitude modulation (QAM) schemes has been a major challenge in the literature. To address this challenge, this thesis introduces a novel scalable pipelined VLSI architecture for a 4x4 64-QAM MIMO receiver based on K-Best lattice decoders.
The key contribution is a means of
expanding/visiting the intermediate nodes of the search tree on-demand, rather than exhaustively along with three types of
distributed sorters operating in a pipelined structure. The combined expansion and sorting cores are able to find the K best candidates in K clock cycles. The proposed architecture has a fixed critical path independent of the constellation order, on-demand expansion scheme, efficient distributed sorters, and is scalable to a higher number of antennas/constellation orders. Fabricated in 0.13um CMOS, it operates at a significantly higher throughput (5.8x better) than currently reported schemes and occupies 0.95 mm2 core area. Operating at 282 MHz clock frequency, it dissipates 135 mW at 1.3 V supply with no performance loss. It achieves an SNR-independent decoding throughput of 675 Mbps satisfying the requirements of IEEE 802.16m and Long Term Evolution (LTE) systems. The measurements confirm that this design consumes 3.0x less energy/bit compared to the previous best design.
|
6 |
VLSI Implementation of Digital Signal Processing Algorithms for MIMO/SISO SystemsShabany, Mahdi 30 July 2009 (has links)
The efficient high-throughput VLSI implementation of
near-optimal multiple-input multiple-output (MIMO) detectors for 4x4 MIMO systems in high-order quadrature amplitude modulation (QAM) schemes has been a major challenge in the literature. To address this challenge, this thesis introduces a novel scalable pipelined VLSI architecture for a 4x4 64-QAM MIMO receiver based on K-Best lattice decoders.
The key contribution is a means of
expanding/visiting the intermediate nodes of the search tree on-demand, rather than exhaustively along with three types of
distributed sorters operating in a pipelined structure. The combined expansion and sorting cores are able to find the K best candidates in K clock cycles. The proposed architecture has a fixed critical path independent of the constellation order, on-demand expansion scheme, efficient distributed sorters, and is scalable to a higher number of antennas/constellation orders. Fabricated in 0.13um CMOS, it operates at a significantly higher throughput (5.8x better) than currently reported schemes and occupies 0.95 mm2 core area. Operating at 282 MHz clock frequency, it dissipates 135 mW at 1.3 V supply with no performance loss. It achieves an SNR-independent decoding throughput of 675 Mbps satisfying the requirements of IEEE 802.16m and Long Term Evolution (LTE) systems. The measurements confirm that this design consumes 3.0x less energy/bit compared to the previous best design.
|
7 |
On The Ntru Public Key CryptosystemCimen, Canan 01 September 2008 (has links) (PDF)
NTRU is a public key cryptosystem, which was first introduced in 1996. It is a ring-based cryptosystem and its security relies on the complexity of a well-known lattice problem, i.e. shortest vector problem (SVP). There is no efficient algorithm known to solve SVP exactly in arbitrary high dimensional lattices. However, approximate solutions to SVP can be found by lattice reduction algorithms. LLL is the first polynomial time algorithm that finds reasonable short vectors of a lattice.
The best known attacks on the NTRU cryptosystem are lattice attacks. In these attacks, the lattice constructed by the public key of the system is used to find the private key. The target vector, which includes private key of the system is one of the short vectors of the NTRU lattice.
In this thesis, we study NTRU cryptosystem and lattice attacks on NTRU. Also, we applied an attack to a small dimensional NTRU lattice.
|
8 |
Lattice reduction for MIMO detection: from theoretical analysis to hardware realizationGestner, Brian Joseph 04 April 2011 (has links)
The objective of the dissertation research is to understand the complex
interaction between the algorithm and hardware aspects of symbol
detection that is enhanced by lattice reduction (LR) preprocessing for
wireless MIMO communication systems. The motivation for this work stems
from the need to improve the bit-error-rate performance of conventional,
low-complexity detectors while simultaneously exhibiting considerably
reduced complexity when compared to the optimal method, maximum
likelihood detection. Specifically, we first develop an understanding of
the complex Lenstra-Lenstra-Lovász (CLLL) LR algorithm from a hardware
perspective. This understanding leads to both algorithm modifications
that reduce the required complexity and hardware architectures that are
specifically optimized for the CLLL algorithm. Finally, we integrate
this knowledge with an understanding of LR-aided MIMO symbol detection
in a highly-correlated wireless environment, resulting in a joint
LR/symbol detection algorithm that maps seamlessly to hardware. Hence,
this dissertation forms the foundation for the adoption of lattice
reduction algorithms in practical, high-throughput wireless MIMO
communications systems.
|
9 |
Design and Implementation of Efficient Algorithms for Wireless MIMO Communication SystemsRoger Varea, Sandra 16 July 2012 (has links)
En la última década, uno de los avances tecnológicos más importantes que han hecho culminar la nueva generación de banda ancha inalámbrica es la comunicación mediante sistemas de múltiples entradas y múltiples salidas (MIMO). Las tecnologías MIMO han sido adoptadas por muchos estándares inalámbricos tales como LTE, WiMAS y WLAN. Esto se debe principalmente a su capacidad de aumentar la máxima velocidad de transmisión , junto con la fiabilidad alcanzada y la cobertura de las comunicaciones inalámbricas actuales sin la necesidad de ancho de banda extra ni de potencia de transmisión adicional. Sin embargo, las ventajas proporcionadas por los sistemas MIMO se producen a expensas de un aumento sustancial del coste de implementación de múltiples antenas y de la complejidad del receptor, la cual tiene un gran impacto sobre el consumo de energía. Por esta razón, el diseño de receptores de baja complejidad es un tema importante que se abordará a lo largo de esta tesis.
En primer lugar, se investiga el uso de técnicas de preprocesado de la matriz de canal MIMO bien para disminuir el coste computacional de decodificadores óptimos o bien para mejorar las prestaciones de detectores subóptimos lineales, SIC o de búsqueda en árbol. Se presenta una descripción detallada de dos técnicas de preprocesado ampliamente utilizadas: el método de Lenstra, Lenstra, Lovasz (LLL) para lattice reduction (LR) y el algorimo VBLAST ZF-DFE. Tanto la complejidad como las prestaciones de ambos métodos se han evaluado y comparado entre sí. Además, se propone una implementación de bajo coste del algoritmo VBLAST ZF-DFE, la cual se incluye en la evaluación.
En segundo lugar, se ha desarrollado un detector MIMO basado en búsqueda en árbol de baja complejidad, denominado detector K-Best de amplitud variable (VB K-Best). La idea principal de este método es aprovechar el impacto del número de condición de la matriz de canal sobre la detección de datos con el fin de disminuir la complejidad de los sistemas / Roger Varea, S. (2012). Design and Implementation of Efficient Algorithms for Wireless MIMO Communication Systems [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/16562 / Palancia
|
10 |
New Password Authenticated Key Exchange Based on the Ring Learning with ErrorsAlsayigh, Saed A. 24 October 2016 (has links)
No description available.
|
Page generated in 0.091 seconds