abstract: Organic light emitting diodes (OLEDs) are a promising approach for display and solid state lighting applications. However, further work is needed in establishing the availability of efficient and stable materials for OLEDs with high external quantum efficiency's (EQE) and high operational lifetimes. Recently, significant improvements in the internal quantum efficiency or ratio of generated photons to injected electrons have been achieved with the advent of phosphorescent complexes with the ability to harvest both singlet and triplet excitons. Since then, a variety of phosphorescent complexes containing heavy metal centers including Os, Ni, Ir, Pd, and Pt have been developed. Thus far, the majority of the work in the field has focused on iridium based complexes. Platinum based complexes, however, have received considerably less attention despite demonstrating efficiency's equal to or better than their iridium analogs. In this study, a series of OLEDs implementing newly developed platinum based complexes were demonstrated with efficiency's or operational lifetimes equal to or better than their iridium analogs for select cases. In addition to demonstrating excellent device performance in OLEDs, platinum based complexes exhibit unique photophysical properties including the ability to form excimer emission capable of generating broad white light emission from a single emitter and the ability to form narrow band emission from a rigid, tetradentate molecular structure for select cases. These unique photophysical properties were exploited and their optical and electrical properties in a device setting were elucidated. Utilizing the unique properties of a tridentate Pt complex, Pt-16, a highly efficient white device employing a single emissive layer exhibited a peak EQE of over 20% and high color quality with a CRI of 80 and color coordinates CIE(x=0.33, y=0.33). Furthermore, by employing a rigid, tetradentate platinum complex, PtN1N, with a narrow band emission into a microcavity organic light emitting diode (MOLED), significant enhancement in the external quantum efficiency was achieved. The optimized MOLED structure achieved a light out-coupling enhancement of 1.35 compared to the non-cavity structure with a peak EQE of 34.2%. In addition to demonstrating a high light out-coupling enhancement, the microcavity effect of a narrow band emitter in a MOLED was elucidated. / Dissertation/Thesis / Doctoral Dissertation Materials Science and Engineering 2014

Lead halide perovskites have shown remarkable device performance in both solar cells and LEDs. Whilst the research efforts so far have been mainly focussed on device optimisation, little is known about the photophysical properties. For example, the nature of the bandgap is still debated and an indirect bandgap due to a Rashba splitting has been suggested. In this thesis, we study the early-time carrier relaxation and its impact on photoluminescence emission. We first study ultrafast carrier thermalization processes using 2D electronic spectroscopy and extract characteristic carrier thermalization times from below 10 fs to 85 fs. We then investigate the early-time photoluminescence emission during carrier cooling. We observe that the luminescence signal shows a rise over 2 picoseconds in CH3NH3PbI3 while carriers cool to the band edge. This shows that luminescence of hot carriers is slower than that of cold carriers, as is found in direct gap semiconductors. We conclude that electrons and holes show strong overlap in momentum space, despite the potential presence of a small band offset arising from a Rashba effect. Recombination and device performance of perovskites are thus better described within a direct bandgap model. We finally study carrier recombination in perovskites and the impact of photon recycling. We show that, for an internal photoluminescence quantum yield of 70%, we measure external yields as low as 15% in planar films, where light out-coupling is inefficient, but observe values as high as 57% in films on textured substrates that enhance out-coupling. We study the photo-excited carrier dynamics and use a rate equation to relate radiative and non-radiative recombination events to measured photoluminescence efficiencies. We conclude that the use of textured active layers has the ability to improve power conversion efficiencies for both LEDs and solar cells.