Spacecraft navigation is a critical component of any space mission. Space navigation uses on-board sensors and other techniques to determine the spacecraft’s current position and velocity, with permissible accuracy. It also provides requisite information to navigate to a desired position, while following the desired trajectory. Developments in technology have resulted in new techniques of space navigation. However, inertial navigation systems have consistently been the bedrock for space navigation. Recently, the successful space mission GOCE used on-board gravity gradiometer for mapping Earth’s gravitational field. This has motivated the development of new techniques like cold atom accelerometers, to create ultra-sensitive gravity gradiometers, specifically suited for space applications, including autonomous orbital navigation. This research aims to highlight the existing developments in the field of gravity gradiometry and its potential space navigation applications. The study aims to use the Linear Covariance Theory to determine specific sensor requirements to enable autonomous space navigation for different flight regimes.

Linear covariance analysis has been utilized in a wide variety of applications. Historically, the theory has made significant contributions to navigation system design and analysis. More recently, the theory has been extended to capture the combined effect of navigation errors and closed-loop control on the performance of the system. These advancements have made possible rapid analysis and comprehensive trade studies of complicated systems ranging from autonomous rendezvous to vehicle ascent trajectory analysis. Comprehensive trade studies are also needed in the area of gimbaled pointing systems where the information needs are different from previous applications. It is therefore the objective of this research to extend the capabilities of linear covariance theory to analyze the closed-loop navigation and control of a gimbaled pointing system. The extensions developed in this research include modifying the linear covariance equations to accommodate a wider variety of controllers. This enables the analysis of controllers common to gimbaled pointing systems, with internal states and associated dynamics as well as actuator command filtering and auxiliary controller measurements. The second extension is the extraction of power spectral density estimates from information available in linear covariance analysis. This information is especially important to gimbaled pointing systems where not just the variance but also the spectrum of the pointing error impacts the performance. The extended theory is applied to a model of a gimbaled pointing system which includes both flexible and rigid body elements as well as input disturbances, sensor errors, and actuator errors. The results of the analysis are validated by direct comparison to a Monte Carlo-based analysis approach. Once the developed linear covariance theory is validated, analysis techniques that are often prohibitory with Monte Carlo analysis are used to gain further insight into the system. These include the creation of conventional error budgets through sensitivity analysis and a new analysis approach that combines sensitivity analysis with power spectral density estimation. This new approach resolves not only the contribution of a particular error source, but also the spectrum of its contribution to the total error. In summary, the objective of this dissertation is to increase the utility of linear covariance analysis for systems with a wide variety of controllers and for whom the spectrum of the errors is critical to performance.

A linear covariance analysis is conducted to assess closed-loop guidance, navigation, and control system (GN&C) performance of the Altair vehicle during lunar powered descent. Guidance algorithms designed for lunar landing are presented and incorporated into the closed-loop covariance equations. Navigation-based event triggering is also included in the covariance formulation to trigger maneuvers and control dispersions. Several navigation and guidance trade studies are presented demonstrating the influence of triggering and guidance and study parameters on the vehicle GN&C performance.

A novel trajectory and attitude control and navigation analysis tool for powered ascent is developed. The tool is capable of rapid trade-space analysis and is designed to ultimately reduce turnaround time for launch vehicle design, mission planning, and redesign work. It is streamlined to quickly determine trajectory and attitude control dispersions, propellant dispersions, orbit insertion dispersions, and navigation errors and their sensitivities to sensor errors, actuator execution uncertainties, and random disturbances. The tool is developed by applying both Monte Carlo and linear covariance analysis techniques to a closed-loop, launch vehicle guidance, navigation, and control (GN&C) system. The nonlinear dynamics and flight GN&C software models of a closed-loop, six-degree-of-freedom (6-DOF), Monte Carlo simulation are formulated and developed. The nominal reference trajectory (NRT) for the proposed lunar ascent trajectory is defined and generated. The Monte Carlo truth models and GN&C algorithms are linearized about the NRT, the linear covariance equations are formulated, and the linear covariance simulation is developed. The performance of the launch vehicle GN&C system is evaluated using both Monte Carlo and linear covariance techniques and their trajectory and attitude control dispersion, propellant dispersion, orbit insertion dispersion, and navigation error results are validated and compared. Statistical results from linear covariance analysis are generally within 10% of Monte Carlo results, and in most cases the differences are less than 5%. This is an excellent result given the many complex nonlinearities that are embedded in the ascent GN&C problem. Moreover, the real value of this tool lies in its speed, where the linear covariance simulation is 1036.62 times faster than the Monte Carlo simulation. Although the application and results presented are for a lunar, single-stage-to-orbit (SSTO), ascent vehicle, the tools, techniques, and mathematical formulations that are discussed are applicable to ascent on Earth or other planets as well as other rocket-powered systems such as sounding rockets and ballistic missiles.