The aim of this thesis is an engineering design of plunger pump with linear motor. This type of pump is used especially for blood pumping in heart surgery. The theoretical part is focused on distribution of pumps, description of extracorporeal circuit and booster heart history. There are basic calculations derived, which describe plunger pump performance. Then varied designs of plunger pumps follows, which are differed in size, shape and application. Next part includes design of reverse valves and their CFD computation.

This thesis deals with study and design of plunger pump with linear motor. This pump can be used for blood pumping in heart surgery. The theoretical part of this thesis is focused on description of extracorporeal circuit, heart boosters and artificial heart. This thesis provides an overview of check valves which are used in heart surgery too. Basic equitations for pump design are derived and calculated in this thesis. The pump design and manufacturing by the 3D technology was made by previous results. Finally, in this thesis are compared theoretical results and experimental data.

The goal of master’s thesis is design of a three-axis manipulator working as x-ray unit. Axis include one rotary and two liner. The work is based on the existing manipulator and the goals are reducing vertical installation space, weight reduction, increasing accuracy and repeatability. Creating 3D model with computational report from available components. There is resulting variant solved with linear motor in this thesis with that there is indicated alternative variant but not dealt with in detail.

The world is looking for greener solutions and so is the mining industry. This quest has led to the question whether it is possible to have a completely electric rock drill. This work carries out an initial exploration of completely electrified percussion. Furthermore, it compares the preliminary performance of an electrified rock drill against a hydraulic counterpart. A mathematical model for an electromagnetic linear motor was developed and simulated as a component in the simulation software Hopsan. This component was then incorporated into a electromagnetic rock drill model which uses components from Epiroc’s in-house developed library. The electromagnetic rock drill model was then optimised and used to obtain the performance characteristics such as impact energy and frequency which were compared against one of the hydraulic rock drill models, COP 1838. The results show that it is possible to reach the same performance as the COP 1838 with enough input current. The characteristics were then studied with respect to variation of physical parameters of the electromagnetic linear motor and input current. Finally some limitations and strengths of the electromagnetic rock drill concept are discussed and some conclusions are presented.

Baigiamajame magistro darbe atlikta daugiainduktorės elektros pavaros valdymo būdų analizė. Pateikiami tiesiaeigio asinchroninio variklio statinių charakteristikų skaičiavimai. Sudaryti daugiainduktorės elektros pavaros kompiuteriniai modeliai: fazinėje koordinačių sistemoje ir x, y koordinačių sistemoje. Tiriamojoje dalyje pateiktos daugiainduktorės elektros pavaros jėgos, pagreičio, greičio, kelio, srovės dinaminės charakteristikos, kai induktoriai maitinami iš pastovios įtampos ir dažnio elektros tinklo. Taip pat pateikiamos jėgos, pagreičio, greičio, kelio, srovės dinaminės charakteristikos, kai induktoriai maitinami iš skirtingos įtampos ir dažnio elektros tinklo. Remiantis gautais rezultatais baigiamojo darbo pabaigoje suformuluotos išvados ir pasiūlymai. Prieduose pateikiami TAV statinių charakteristikų skaičiavimo rezultatai, kompiuterinio modelio programa. Darbą sudaro 8 dalys: įvadas, literatūros apžvalga, tyrimo tikslas ir uždaviniai, teorinė dalis, tiriamoji dalis, išvados ir pasiūlymai, literatūra ir kiti šaltiniai, priedai. Darbo apimtis – 64 p. teksto be priedų, 65 iliustr., 2 lentelės 33 bibliografiniai šaltiniai. / In the Final Master Thesis analyzed control methods of multi inductor linear electric drive . Provided the linear induction motor operating characteristics calculations. Moreover, two types of computer models are created: in phase coordinate system and x, y coordinate system. At the research part presented multi inductor electric drive force, acceleration, speed, road, current dynamic characteristics, when inductors are powered by a constant voltage and frequency of the mains. Also presents force, acceleration, speed, road, current dynamic characteristics, when inductors are powered from different voltage and frequency of the mains. Based on the results of the thesis provides conclusions and recommendations. At the annexes part presented calculation results of linear electric motor static characteristics and application of a computer model. The Thesis consists of 8 sections: introduction, literature review, research purpose and objectives, the theoretical part, research part, conclusions and suggestions, references and other sources and annexes. The Thesis includes: 64 pages of the text without annexes, 65 figures, 2 tables, 33 references.

The thesis focuses on the development of instruments used for surfaces and nanostructures characterization. Individual techniques of scanning probe microscopy provide different information of the sample surface. The resolution of scanning probe microscopy, providing 3D topography information, reaches subnanometer values or even an atomic level. Therefore, the scanning probe microscopy is one of the most employed method in the field of nanotechnology. The thesis describes the details of development of two scanning probe microscopes intended for measurement under ultra high vacuum conditions. As for the first one, many changes were proposed leading to its better variability, extended functionality and increased user comfort. The second microscope is being design with the aim of its combination with other analytic techniques, especially with scanning electron microscopy. An integral part of scanning probe microscopes is a precise positioning system for navigation of the probe to the selected site. Therefore, the thesis also deals with the development of linear piezoceramic actuators used not only in the ultra high vacuum compatible microscopes but also as a general purpose nanomanipulators.

The diploma thesis is aimed at the constructional design of diaphragm pumps with a linear motor. This pump is supposed to be used in medicine for pumping the blood or as an artificial heart. The basic facts, which are focused on the function of the heart and artificial heart, are mentioned in the first parts of the thesis. The next parts describe the diaphragm pumps and the constructional ways of their diaphragm fixation. Furthermore, the basic calculations, describing the function of the pump, are derived there. The basic parameters of the pump are also calculated. The thesis also contains the description of the body pump construction, whose working room is optimized by CFD calculation before the pump is manufactured. The final part of the thesis is concentrated on the measurement evaluation of produced pump model.

The aim of the thesis is the design machines for laser cutting and plasma workspace 2.0 x1, 8 meters. The work described technology laser cutting and plasma and the resulting demands on the machine. Longer work includes a search of design solutions, then the actual design, including the necessary calculations and drawings.

The aim of this diploma thesis is the design of robotic table football with the realization of the construction and control a single axis of table football. In introduction are described previously developed solutions. Next chapters contain a selection of specific gaming table and specification of linear, rotary motor. There are presented design visions with the placement of selected component together with proposal location of sensor system for ball detection. In the end of design section is specification and solution of placement safety features. The programming part of the thesis involves the implementation of a communication interface for data processing from the control algorithm of robotic table football.

Šiame baigiamajame darbe tiriamas elektriškai ir magnetiškai dvipusio tiesiaeigio asinchroninio variklio (TAV) valdymo būdas, keičiant vieno iš induktorių maitinimo įtampos fazę kito induktoriaus maitinimo įtampos fazės atžvilgiu. Įvade suformuluotas darbo tikslas ir paminėtos TAV taikymo galimybės. Atlikta literatūros šaltinių analizė ir apžvelgti tiesiaeigiai asinchroniniai varikliai bei jų konstrukcijos. Pateikti šių variklių privalumai, trūkumai ir panaudojimo sritys. Teorinėje dalyje išanalizuotos tiesiaeigės stūmiklių pavaros ir apžvelgti specialūs tiesiaeigių variklių valdymo būdai. Išanalizuotos statinės charakteristikos ir sudaryta skaičiavimo metodika. Tiriamojoje dalyje sudarytas TAV modelis ir imituotos dinaminės charakteristikos. Pagamintas ir išbandytas TAV bandymų stendas, pateiktos išvados. Pasiūlyta tiesiaeigės stūmiklio pavaros funkcinė ir elektrinė principinė schemos. Darbą sudaro 7 dalys: įvadas, literatūros analizė, tyrimo tikslas ir uždaviniai, tiriamoji dalis eksperimentinė dalis, tyrimo rezultatų apibendrinimas, literatūra ir kt. šaltiniai. Darbo apimtis – 70 p. teksto be priedų, 49 iliustr., 3 lent., 24 bibliografiniai šaltiniai. / Electrically and magnetically control mode of two-sided linear induction motor (LIM) is analysed in this thesis. It is done by changing one of the voltage power supply inductor phase regard to next phase inductor. The main goal of thesis and LIM application possibilities are formulated in introduction. Literature review and analysis of linear induction motors and their construction was accomplished. The use of energy, main advantages and disadvantages of these motors were represented. Special control techniques, analysis of linear pushing drives and linear motors were analysed in theoretical section. LIM static characteristics and calculation methodology is provided in this section either. In the research section consist of LIM mathematical model, where dynamic characteristics are simulated. The actual LIM model was made and tested, experiment conclusions were written. The linear spindle drive functional and electrical diagrams were proposed. The work consists of seven sections: introduction, literature review, the study of aims and objectives, experimental section, investigating LIM and providing results, literature and others sources. Work size - 70 p. text without appendixes, 49 pictures., 3 tables., 24 bibliographic sources.