This master’s thesis deals with the influence of different carbon materials on the properties of Li-S accumulators. The theoretical part of the thesis describes primary and secondary electrochemical sources with a focus on medical applications. The second chapter deals individually with a lithium article. The main part of the thesis is the practical production of electrodes for Li-S accumulators using different types of carbon materials. The effects of these materials on the properties of accumulators are investigated to determine the most appropriate in terms of capacity and stability.

Presented in this thesis is the design and characterization of a new, high-flux source of cold atoms based on continuous, post-nozzle injection of lithium atoms into a cryogenic, supersonic helium jet. To date, experiments have been performed with lithium injection fractions up to [approximately equal to]10⁻⁶, where fluorescence spectroscopy reveals successful capture and thermalization of lithium atoms within the helium jet. The observed lithium beam copropagates with the helium jet and has a temperature of less than 10 mK, a brightness of 1.1x10¹⁹ m⁻² s⁻¹ sr⁻¹, and a brilliance of 3.1x10²⁰ m⁻² s⁻¹ sr⁻¹. Lithium atoms contained within a solid angle of [approximately equal to]0.018 sr are good candidates for future magnetic extraction. This results in a potentially capturable lithium flux of 1.1x10¹² s⁻¹, comparable to the existing record for a cold atomic beam. Also presented is preliminary data showing lithium fluorescence nearly 1 m downstream, demonstrating that the cold lithium beam can be successfully extracted from the seeding region. Numerical simulations reproduce capture efficiency to within 50%, suggesting that the process is well understood. We believe that successful seeding may be possible at a fraction up to 10⁻⁴. Seeding at this rate could produce an atomic beam with a flux as high as 1.3x10¹⁴ s⁻¹ at a phase-space density up to 1.6x10⁻⁷, corresponding to brightness and brilliance of order 10²² m⁻² s⁻¹ sr⁻¹ and 10²⁴ m⁻² s⁻¹ sr⁻¹ , respectively. If this novel cooling method performs as well at higher incident lithium flux, it could serve as a pump source and pave the way to the realization of the first truly continuous atom laser. / text