ITC/USA 2010 Conference Proceedings / The Forty-Sixth Annual International Telemetering Conference and Technical Exhibition / October 25-28, 2010 / Town and Country Resort & Convention Center, San Diego, California / One of the most important characteristics of an aircraft is its capability to return to its stable trimmed flight state after the occurrence of a disturbance or gust without the pilot intervention. The evaluation of such behavior, known as the aircraft stability, is divided into three sections: Lateral; Directional; and Longitudinal stabilities. The determination of the stability of an experimental aircraft requires the execution of a Flight Test Campaign (FTC). For the stability FTC the test bed should be equipped with a complete Flight Test Instrumentation (FTI) System which is typically composed by: a Pulse Code Modulation (PCM) Data Acquisition System (DAS); A sensor set; An airborne transmitter; and A data recorder. In the real-time operations, live data received over the Telemetry Link, that are processed, distributed and displayed at the Ground Telemetry System (GTS) enhances the FTC safety level and efficiency. The due to the lack of reliability, recorded data is retrieved in the post mission operations to allow the execution of data reduction analysis. This process is time consuming because recorded data has to be downloaded, converted to Engineering Units (EU), sliced, filtered and processed. The reason for the usage of this less efficient process relies in the fact that the real-time Telemetry data is less reliable as compared to recorded data (i.e. noisier). The upcoming iNET technology could provide a very reliable Telemetry Link. Therefore the data reduction analysis can be executed with live telemetry data in quasi-real time after the receipt of all valid tests points. In this sense the Brazilian Flight Test Group (GEEV) along with EMBRAER and with the support of Financiadora de Estudos e Projetos (FINEP) started the development of several applications. This paper presents the design of a tool used in the Longitudinal Static Stability Flight Tests Campaign. The application receives the Telemetry data over either a TCP/IP or a SCRAMnet Network, performs data analysis and test point validation in real time and when all points are gathered it performs the data reduction analysis and automatically creates Hyper Terminal Markup Language (HTML) formatted tests reports. The tool evaluation was executed with the instruction flights for the 2009 Brazilian Flight Test School (CEV). The result shows an efficiency gain for the overall FTC.

The study is conducted to determine practical modelling and simulation techniques to perform dynamic stability and performance analysis on a 3 Degrees of freedom aircraft model using a Modelica-based commercial tool called Modelon Impact. This study is based on a conceptual aircraft model where in-depth details about the aircraft configuration are unknown and the aim is to determine a suitable model that can capture the longitudinal dynamics and aerodynamic constraints of the aircraft during the conceptual design phase. Requirements include short execution time, easy model development, and minimal data requirements. Therefore, this thesis aims at developing plant and control architectures in  Modelon Impact which can be utilized for the rapid development of aircraft concepts with adequate fidelity in a longitudinal mission-based tracking environment. In a conceptual aircraft design environment, to identify a suitable methodology that mitigates the limitations of a traditional feedback controller, two methodologies are considered for comparison: Sequential DAE resolution (SDR) and Dynamic inversion (DI) control which is discussed from an object-oriented aircraft model. The advantages and shortcomings of each of the models discussed above are compared by conducting several experiments in increasing order of longitudinal mission complexity, and the most appropriate model among the two for a conceptual stage of aircraft design development is ascertained. The two methodologies discussed are compared for their level of complexity, code structure, readability, and ease of usability.