No description available.

No description available.

No description available.

In recent years, the demand for compact handheld communication devices has grown significantly. Devices having internal antennas have appeared to fill this need. Antenna size is a major factor that limits device miniaturization. In the past few years, new designs based on the microstrip antennas (MSA) and planar inverted-F antennas have been used for handheld wireless devices because these antennas have low-profile geometry and can be embedded into the devices. New wireless applications requiring operation in more than one frequency band are emerging. Dual-band and tri-band phones have gained popularity because of the multiple frequency bands used for wireless applications. One prominent application is to include bluetooth, operating band at 2.4 GHz, for short-range wireless use. This thesis examines two antennas that are potential candidates for small and low-profile structures: microstrip antennas and planar inverted-F antennas. Two techniques for widening the antenna impedance bandwidth are examined by adding parasitic elements. Reducing antenna size generally degrades antenna performance. It is therefore important to also examine the fundamental limits and parameter tradeoffs involved in size reduction. In the handheld environment, antennas are mounted on a small ground plane. Ground plane size effects on antennas are investigated and the results from a thorough numerical study on the performance of a PIFA with various ground planes sizes and shapes is reported. Finally, a new wideband compact PIFA antenna (WC-PIFA) is proposed. Preliminary work is presented along with numerical and experimental results for various environments such as free space, plastic casing, and the proximity of a hand. This new antenna covers frequencies from 1700 MHz to 2500 MHz, which basically include the following operating bands: DCS-1800m PCS-1900, IMT-2000, ISM, and Bluetooth. / Master of Science

No / An experimental study of coupling compensation for AOA estimation using compact low profile antenna arrays with element separations of a quarter wavelength has been conducted. Two circular arrays of low profile miniaturised logarithmic spiral antennas deployed on a circular metal plate were used for data acquisition. Using the MUSIC direction-finding algorithm, the AOA estimation errors in receiving mode were observed before and after compensation: the errors were significantly decreased by coupling compensation.

The aim of this research was to study a novel, broadband, low cost, low profile and a high-medium gain antenna in the UHF band. This has been achieved through numerical modelling, theoretical investigation and physical measurements. In this study two commercially available antenna systems are investigated in order to compare and establish potential deficiencies in the UHF antenna systems. A number of disadvantages are resolved within a novel antenna system design. The parametric study is performed for each element of the novel antenna system in order to optimise its overall performance. The indoor and outdoor measurements have been carried out in house, in order to validate the predicted results. The novel antenna system is compared to the most popular and commercially available UHF antenna systems. The study demonstrates that the novel antenna system has clear advantages such as broadband, balanced, compact and low cost when compared to the commercial antenna designs studied here. The comparison of the manufacturers' data to the measured results shows a good match, validating the outdoor measurements technique used in this research.

A pattern-reconfigurable, low-profile, efficient, electrically small, near-field resonant parasitic (NFRP), Huygens source antenna is presented. The design incorporates both electric and magnetic NFRP elements. The electric ones are made reconfigurable by the inclusion of a set of p-i-n diodes. By arranging these electric and magnetic NFRP elements properly, a set of three Huygens sources are attained, each covering a 120 degrees sector. Pattern reconfigurability is obtained by switching the diodes on or off; it encompasses the entire 360 degrees azimuth range. A prototype was fabricated and tested. The numerical and experimental studies are in good agreement. The experimental results indicate that in each of its instantaneous states at f(0) = 1.564 GHz, the antenna provides uniform peak realized gains, front-toback ratios, and radiation efficiencies, respectively, as high as 3.55 dBi, 17.5 dB, and 84.9%, even though it is electrically small: ka = 0.92, and low profile: 0.05 lambda(0).

In this dissertation, many novel low-cost planar antenna designs are presented for on-vehicle applications. Promising planar antennas showing the desired broadside and omnidirectional radiation patterns and having low-profile configurations are demonstrated. Also, studies on controlling the radiation patterns are conducted. Details of the measured and simulated results of the studied antennas are presented and discussed.

The beginning of the 21 st century is characterised, among others, by the evolution in telecommunications. The rapid growth of mobile communications and the variety of applications proposed for the third generation (3G) systems require long operation time, low weight and cost for terminals, as well as improved link quality. For this reason a good efficiency and low profile antennas with low absorption losses by the user are desirable. The Planar Inverted-F Antenna (PIFA) is shown to result into low SAR values and high efficiency when operating in the proximity of the user. Despite these advantages, PIFA is also characterised by narrow bandwidth that limits its practical use. The first part of this work is dedicated to the measurements and evaluation of the radiation characteristics of the PIFA and other wire antennas both in the near and far fields. In addition, novel methods of PIFA tuning are presented. These include the repositioning of the shorting pin and modification of its capacitance. By using these techniques, the effective bandwidth of the PIFA can be increased to satisfy the GSM900 and DCS 1800 system bandwidth requirements. Dual-band and electronically tuned PIFA prototypes are also included. The effects of the handset size on the mass averaged Specific Absorption Rate (SAR), and antenna efficiency are investigated. The appropriate choice of handset can result in up to 30%-reduced peak SAR. The computed SAR values from PIFA are compared with those resulting from the use of a handset equipped with quarter wavelength monopole antenna. A new measure referred to as the 3dB SAR volume is proposed. This measure provides better understanding of the absorbed power distribution in the operator's head. Results obtained in the course of study show that low profile handset antennas, such as the PIFA, present in addition to dual resonance and low reflection losses, reduced SAR values, high efficiency and low 3dB SAR volume. Finally, SAR and 3dB SAR volume values from simulations on 5- and 10- years old child head models are compared with their equivalents for adult models from which appropriate conclusions are drawn.

Master thesis concerns with a design of a low profile loader. This work deals with concept design of a loader, while keeping with ergonomic, economical and psychological aspect dictated by modern society and technological know-how of today’s world with possible overview in to a near future. By extrapolating of a today’s technological development, this thesis is looking in to a design of a loader which is a solution for a lot of contemporary problems and improves utility value. The design improves working environment of operators as well as economical gain of the owners.