The main thrust of this thesis is the development of new triarylborane containing luminescent molecules as well as utilizing triarylboron center as a receptor for the selective detection of biologically, environmentally and industrially important anions such as fluoride and cyanide in aqueous and non-aqueous solutions. The thesis contains nine chapters. The contents of each chapter are described below. Chapter 1 The first chapter is an introduction to the theme of the thesis and presents a general review on the techniques, theories and photochemistry relevant to the present work with emphasis on photochemistry of triarylboranes and their importance in the field of anion sensor chemistry. A review on various boron based luminophores is also presented. Chapter 2 The second chapter deals with the general experimental techniques and synthetic procedures utilized in this work. Chapter 3 This chapter deals with the synthesis of boryl-BODIPY dyads (1-8) in which triarylborane acts as anion receptor and BODIPY as a signalling unit. The absorption spectra of all boryl-BODIPY dyads shows similar pattern. However, the fluorescence spectra of 1, 2, 3, 6 and 7 shows dual emission bands whereas 4, 5 and 8 exhibit a single emission band. These interesting photophysical properties of boryl-BODIPYs (1-8) depends on the dihedral angle between two chromophores and partial energy transfer from donor (triarylborane) to acceptor (BODIPY) unit. The energy transfer efficiency of compounds 4, 5 and 8 is higher (close to 100%) compared to other series of boryl-BODIPYs (1-3, 6 and 7), due to the orthogonal arrangement of chromophores with high dihedral angles. To better understand photophysical properties and energy transfer process, anion binding studies were carried out since triarylborane acts as receptor for fluoride and cyanide ions. Anion binding studies of boryl-BODIPYs were (1-5) carried out in dichloromethane solutions and using tetrabutylammonium salt of fluoride/cyanide. All boryl-BODIPY dyads (1-5) were sensitive and selective sensor of fluoride, whereas the presence of only excess amounts (20 equv or more amounts) of cyanide made any changes in absorption and emission spectra. Other anions even above 100 eq were unable to cause any change. The quenching efficiency of compounds 4 and 5 was found to be more than that of other boryl-BODIPYs (1 and 3). The binding of fluoride with boryl-BODIPY (1-5) was entirely reversible; addition of BF3•Et2O to the fluoride adducts of compounds (1-5) regenerated the parent compounds. Chapter 4 In chapter 3, it was established that linear boryl-BODIPY dyads (1-8) show dual/single fluorescence bands depending on the dihedral angle between triarylborane and BODIPY unit. This Chapter describes the synthesis of three new “V” shaped boryl-BODIPY dyads (9, 10 and 11) their optical properties, Compound 9-11 are structurally similar differing only in the number of methyl substituents on the BODIPY moiety which were found to play major role in determining their optical behavior. The dyads show rare forms of multiple channel emission characteristics arising from different extents of electronic energy transfer (EET) processes between the two covalently linked fluorescent chromophores (triarylborane and BODIPY units). Owing to the presence of Lewis acidic triarylborane moiety, the dyads function as highly selective and sensitive fluoride sensors with vastly different response behavior. Upon binding of fluoride to the tricoordinate borane centre, dyad 9 shows gradual quenching of its BODIPY dominated emission due to the cessation of (borane to BODIPY) EET process. Dyad 10 shows ratiometric changes in its emission behavior upon addition of fluoride. Dyad 11 forms fluoride induced nanoaggregates which result in fast and effective quenching of its emission intensity upon addition of even small quantities of analyte (i.e. 0.1 equivalent of fluoride). When the solution is allowed to stand, disaggregation of the molecules results in partial recovery of the initial fluorescence bands. Thus, small structural alterations in these three structurally close dyads (9-11) result in exceptionally versatile and unique photophysical behavior and remarkably diverse responses towards a single analyte i.e. fluoride anion. Chapter 5 This chapter deals with intermolecular charge transfer (ICT) process in borane containing donor-acceptor triads and tetrads to realize colorimetric response for small anions such as fluoride and cyanide. Triad 12 and tetrad 13 incorporating –B(Mes)2, BDY (borondipyrromethene), and TPA (triphenylamine) were synthesized. Introduction of two dissimilar acceptors (triarylborane and BODIPY) on a single donor (TPA) resulted in two distinct ICT process (amine to borane and amine to BDY). The absorption and emission properties of new triad and tetrad are highly dependent on individual building units. The nature of electronic communication among the individual fluorophore units has been comprehensively investigated and compared with building units. Compounds 12 and 13 showed chromogenic and fluorogenic response towards small anions such as fluoride and cyanide. Chapter 6 In the previous chapter, it was demonstrated that although triphenylamine-triarylborane-BODIPY donor-acceptor conjugates show colorimetric response towards fluoride and cyanide. They could not distinguish these two interfering anions. To overcome the anion interference peripherally triarylborane decorated porphyrin (14) and its Zn(II) complex (15) were designed and synthesized and this forms the subject matter of this Chapter. Compound 15 contains two different Lewis acidic binding sites (Zn(II) and boron centre). Unlike all previously known triarylborane based sensors, the optical responses of 15 towards fluoride and cyanide are distinctively different thus enabling the discrimination of these two interfering anions. Metalloporphyrin 15 shows a multiple channel fluorogenic response towards fluoride and cyanide and also a selective visual colorimetric response towards cyanide. By comparison with model systems and from detailed photophysical studies on 14 and 15, it was concluded that the preferential binding of fluoride occurs at the peripheral borane moieties resulting in the cessation of the EET (electronic energy transfer) process from triarylborane to porphyrin core and with negligible negative cooperative effects. On the other hand, cyanide binding occurs at the Zn(II) core leading to drastic changes in its absorption behavior which can be followed by the naked eye. Such changes are not observed when the boryl substituent is absent (e.g. tetraphenyl-Zn(II)-porphyrin or TPP). The conjugates 14 and 15 showed reversible binding interaction towards CN and F and they are capable of extracting fluoride from aqueous media. Chapter 7 This Chapter deals with the design of a sensor which can detect fluoride colorimetrically in aqueous medium. Detecting fluoride in aqueous solution is an important area of current research owing to both positive and negative health and environmental effects associated with the fluoride ion. Although numerous fluoride sensors are reported, the colorimetric sensing (visual detection without the need of costly equipment and complicated analytical of fluoride at recommended levels 0.7 ppm) has not realized. Here we report the design, optical and fluoride sensing ability of two new water soluble Lewis acidic triarylborane-triarylamine conjugates 16 and 17 (containing one or two ammonium cations (-C6H4-NMe3). Compound 17 shows selective colorimetric response for aqueous inorganic fluoride at as low a level as 0.1 ppm Chapter 8 The synthesis and optical properties of four new triarylborane–dipyrromethane (TAB– DPM) conjugates (19a–d) containing dual binding sites (hydrogen bond donor and Lewis acid) have been reported. The new compounds exhibit a selective fluorogenic response towards the F− ion. The NMR titrations show that the fluoride ions bind to the TAB–DPM conjugates via the Lewis acidic triarylborane centre in preference to the hydrogen bond donor (dipyrromethane) units. Chapter 9 A new triarylborane-aza-BODIPY conjugate is reported (22). The conjugate molecule consists of two blue emissive dimesitylarylborane moiety and a NIR (near infra-red) emissive aza-BOIDPY core and shows panchromatic absorption spanning over ~300-800 nm region. The presence of two different fluorophore units in the conjugate leads to a broad dual-emissive feature covering a large part of visible and NIR region. DFT computational studies suggest limited electronic communication between the individual fluorophore units which may be responsible for the intriguing optical features of the conjugate molecule. Further, the broadband emissive conjugate can act as a selective sensor for fluoride anion as a result of fluorescence quenching response in both visible as well as in NIR spectral region.

Luminescent materials find numerous applications in recent times and have enriched human lives in several different ways. From display and lighting technologies to security, sensing and biological investigations, luminescent organic compounds have become indispensible and often preferred over their inorganic counterparts. The versatility of organic materials arises from their comparative low costs, ease of fine-tuning, low toxicity and the possibility to develop flexible devices. Even until very recent times, the investigations and usage of organic luminescent materials were mostly limited to solution-state properties. However, with progress of available characterisation techniques and parallel development of their usage in solid-state devices and other applications (e.g. security, forensics, sensing etc.), significantly greater attention has been paid to the development and investigations of solid-state emissive organic materials. In solid-state applications, apart from the molecular properties of any given material, their cumulative i.e. bulk physical properties are of even greater importance. Thus, investigations of structure-property relationships in organic luminescent compounds to understand their molecular and bulk properties are of fundamental interest. In this thesis, NPI (1,8-naphthalimide) and BODIPY (boron-dipyrromethene) dyes were investigated to provide a broad overview of their structure-property correlations. Among commonly encountered organic luminescent materials, NPIs and BODIPYs have emerged as two broad classes of luminescent organic compounds, finding applications as functional luminescent materials in various fields. However, lack of understanding for controlling the cumulative emissive properties of these compounds has limited their usage as active solid-state emitters in various applications. This thesis presents several new insights into the molecular and bulk emissive properties of these two classes of luminescent dyes (NPIs and BODIPYs). The contents of the six chapters contained in this thesis are summarised below. Chapter 1 summarises the available understanding of the basic concepts of photoluminescence and the design strategies to develop solid-state luminescent and AIE (aggregation-induced emission) active materials. This chapter also emphasises in the basic nature of the NPI and BODIPY compounds, their substitution patterns and their inherent characteristics and touches upon the relatively unexplored properties of NPI and BODIPY based materials. The importance and scope of the work reported in the thesis is outlined at the end of the chapter. Chapter 2 describes a detailed investigation of a series of seven (4-oxoaryl substituted) NPI compounds (1-7) providing an insight into the molecular and cumulative photophysical behaviour of these compounds. The low ICT characteristics of the NPIs, coupled with the twisted geometry, facilitated solid-state luminescence in these materials. The solution and solid-state luminescent properties of these compounds can be directly correlated to their structural rigidity, nature of substituents and solid-state intermolecular interactions (e.g. π-π stacking, C-H•••O interactions etc.). The solid-state crystal structures of the NPI siblings are profoundly affected by the pendant substituents. All of the NPIs (1-7) show antiparallel dimeric π-π stacking interactions in the solid-state which can further extend in parallel, alternate, orthogonal or lateral fashion depending on the steric and electronic nature of the C-4′ substituents. Structural investigations including Hirsfeld surface analysis methods reveal that while strongly interacting systems show weak to moderate emission in their condensed states, weakly interacting systems show strong emission yields under the same conditions. The nature of packing and extended structures also affects the emission colors of the NPIs in the solid-state. DFT computational studies were utilized to understand the molecular and cumulative electronic behavior of the NPIs. Apart from the investigation of solid-state luminescence, other functional potentials of these NPIs were also explored. One of the compounds (i.e. 4) shows chemodosimetric response towards aqueous Hg(II) species with a ‘turn-on’ response. Also, depending on the molecular flexibility of the compounds, promising AIEE (aggregation-induced emission enhancement) features were observed in these NPIs. Later (in Chapter 3), we developed a systematic investigation in a series of purely organic NPIs, restricting various parameters, to attain a thorough understanding of such AIEE properties. Chapter 3 describes a detailed experimental and computational study in order gain an insight into the AIE (aggregation-induced emission) and AIEE mechanisms in NPI compounds. Systematic structural perturbation was used to fine tune the luminescence properties of three new 1,8-naphthalimides (8-10) in solution and as aggregates. The NPIs (8-10) show blue emission in solution state and the fluorescence quantum yields depend on their molecular rigidity. In concentrated solutions of the NPIs, intermolecular interactions were found to result in quenching of fluorescence. In contrast, upon aggregation (in THF:H2O mixtures), two of the NPIs show aggregation-induced-emission-enhancement (AIEE). The NPIs also show moderately high solid-state emission quantum yields (~10-12.7 %). The AIEE behaviors of the NPIs depend on their molecular rigidity and nature of intermolecular interactions. The NPIs (8-10) show different extents of intermolecular (π-π and C-H•••O) interactions in their solid-state structures depending on their substituents. Detailed photophysical, computational and structural investigations suggest that only an optimal balance of structural flexibility and intermolecular communication is the effective recipe for achieving AIEE characteristics in these NPIs. Chapter 4 presents the design, synthesis and detailed investigations and potential applications of a series of NPI-BODIPY dyads (11-13). The NPI and BODIPY moieties in these dyads are electronically separated by oxoaryl bridges and the compounds only differ structurally with respect to methyl substitutions on the BODIPY fluorophore. The NPI and BODIPY moieties retain their optical features in these molecular dyads (11- 13). Dyads 11-13 show dual emission in solution state originating from the two separate fluorescent units. The variations of the dual emission in these compounds are controlled by the structural flexibility of the systems. The dyads also show significant AIES (Aggregation-Induced-Emission Switching) features upon formation of nano-aggregates in THF-H2O mixtures with visual changes in emission from green to red color. Whereas the flexible and aggregation prone system (i.e. compound 11) shows aggregation-induced enhancement of emission, rigid systems with less favorable intermolecular interactions (i.e. compound 12-13) show aggregation-induced quenching of emission. The emission-intensity vs. the structural-flexibility correlations were found to be reverse in solution and aggregated states. Photophysical and structural investigations suggest that the intermolecular interactions (e.g. π-π stacking etc.) play major role in controlling emission of these compounds in aggregated states. Similar trends were also observed in the solid-state luminescence of these compounds. The applications of the luminescent dyads 11-13 as live-cell imaging dyes was also investigated. Chapter 5 describes investigations of photophysical properties of a series of six BODIPY dyes (14-19) in which there is a systematic alteration of a common -C6H4Si(CH3)3 substituent. Inrelated constitutional isomers, the systematic increment of steric congestion and lowering of molecular symmetry around the BODIPY core result in a steady increment of solution and solid- state fluorescence quantum yields. The increasing fluorescence quantum yields (solution, solid state) with increasing steric congestions show that the molecular free rotation and aggregation-induced fluorescence quenching of BODIPYs can be successfully suppressed by lowering the flexibility of the molecules. Photophysical and DFT investigations reveal that the electronic band gap in any set of these constitutional isomers remain almost similar. However, the crystal structures of the compounds reveal that the solid-state colour and quantum yields of the compounds in solid-state are also related to the nature of intermolecular interactions. Chapter 6 demonstrates the use of DFT computational methods to understand the effect of alkyl groups in governing the basic structural and electronic aspects of BODIPY dyes. As demonstrated in Chapter 4 and Chapter 5, apparently electronically inactive alkyl groups can be of immense importance to control the overall photophysics of BODIPYs. In this context, a systematic strategy su was utilized considering all possible outcomes of constitutionally-isomeric molecules to understand the effects of alkyl groups on the BODIPY molecules. Four different computational methods were employed to ascertain the unanimity of the observed trends associated with the molecular properties. In line with experimental observations, it was found that alkyl substituents in BODIPY dyes situated at 3/5-positions effectively participate in stabilization as well as planarization of such molecules. Screening of all the possible isomeric molecular systems was used to understand the individual properties and overall effects of the typical alkyl substituents in controlling several basic properties of such BODIPY molecules.